1. Introduction
Thank you for purchasing the MILESEEY laser distance meter. Please read this manual carefully before using the device. The MILESEEY S2 (also referred to as D5) Laser Measure offers 9 functions to satisfy different measuring needs and greatly improve user experience.
The Mileseey S2 is a compact, handheld laser rangefinder, perfectly designed for fast and accurate distance measurement in home renovation and construction scenarios. As a mini-sized and portable tool, it is suitable for both DIY enthusiasts and professional contractors, easy to carry and operate with one hand. Equipped with a clear display screen, it delivers instant and reliable measurement results, supporting both distance calculation and angle measurement to meet diverse usage needs. Whether you are measuring room dimensions, calculating material quantities, verifying construction layouts or daily small-range measurements, the S2 provides high precision and fast response. With its durable build and user-friendly interface, it can withstand daily use in various environments, ensuring stable performance and long-lasting reliability. This practical mini rangefinder combines portability and professionalism, becoming an essential helper for home improvement and construction work.
Note: The model on the package is S2. The device is the same as previously known as D5.
2. Safety Information and Cautions
! CAUTION
For the safe use of this handheld laser distance meter, please read the following instructions carefully:
- The device is categorized as a Class 2 laser product. DO NOT stare directly at the laser or point it at others, as it will cause damage to eyes.
- The product is manufactured in accordance with strict standards and regulations. However, the possibility of interference with other devices, or discomfort to humans and animals, cannot be entirely excluded.
- Please DO NOT use this product in explosive or corrosive environments.
- Please DO NOT use this product near medical devices.
- Please DO NOT use this product on an airplane.
Disposal
It is prohibited to dispose of used batteries with household waste. Please collect used batteries at designated waste stations. This product must not be recycled with household waste. Dispose of the product appropriately in accordance with the national regulations in your country.
Scope of Responsibility
MileSeey will not be responsible for damages caused by improper use, including:
- Using the product without instruction.
- Use of accessories from other manufacturers without approval from MileSeey.
- Carrying out modification or conversion of the product.
3. Product Overview
3.1. Device Dimensions and Key Features

3.2. Button Functions

- MEAS Button: Short press to activate laser, long press to enter Continuous Measurement (Min/Max).
- Area/Volume/Pythagorean Button: Selects Area, Volume, or Pythagorean measurement modes.
- Measuring Reference / Unit Button: Switches between front and rear measuring reference points. Long press to change distance units (m, ft, in, ft+in).
- Historical Memory Button: Accesses stored measurement data.
- ON/OFF/Return/Clear Button: Powers the device on/off, returns to previous screen, or clears the last measured value.
- Add(+) / Subtract(-) Button: Performs addition or subtraction of measurements.
- Mute Button: Toggles the beep sound on/off.
3.3. LCD Display

- Laser on indicator
- Reference point (front)
- Reference point (rear)
- Distance / Continuous measurement display
- Measuring mode indication (5, 6, 7, 8)
- Battery status indicator
- Historical memory indicator
- Value 1 display
- Value 2 / Min value display
- Value 3 / Max value display
- Summary line / latest value / calculation result display
4. Setup
4.1. Battery Insertion
The device requires 2 x AAA 1.5V batteries (not included in some packages). To insert batteries:
- Open the battery compartment cover on the back of the device.
- Insert the two AAA batteries according to the positive (+) and negative (-) polarity markings inside the compartment.
- For safety, close the battery compartment with the provided lid after battery insertion.

5. Operating Instructions
5.1. Initial Operating and Settings
- Power On / Off (Manual): Long press the ON/OFF/Return/Clear button to switch the device on or off.
- Power Off (Automatic): The instrument switches off automatically after three minutes of inactivity.
- Return / Clear: When measuring, press the ON/OFF/Return/Clear button to undo the last action or clear the measured value.
- Adjusting Measuring Reference: Press the Measuring Reference / Unit button to switch the reference point between the front and the rear of the instrument. The default reference is from the rear. This setting will revert to default (rear) every time the device is powered off.
- Unit Change: Long press the Measuring Reference / Unit button to change the distance unit between meters (m), feet (ft), inches (in), and feet+inches (ft+in).
- Beep On/Off: Press the Mute button to switch the beep sound on or off.
5.2. Measurement Modes


- Single Distance Measurement:
Press the MEAS button to activate the laser. Press MEAS again to trigger the distance measurement. The measured value is displayed immediately. - Continuous Measurement (Min / Max):
Long press the MEAS button to activate continuous measurement. The maximum and minimum distances measured are shown on the display. The last measured value is displayed in the summary line. This function will stop automatically after 5 minutes of inactivity. Press the ON/OFF/Return/Clear button or MEAS button to stop the function. - Area Measurement:
Press the Area/Volume/Pythagorean button once. The area symbol will appear on the display. Press MEAS to take the first distance measurement (e.g., length). Press MEAS again to take the second distance measurement (e.g., width). The results of length, width, perimeter, and area are displayed on the screen. - Volume Measurement:
Press the Area/Volume/Pythagorean button twice. The volume symbol will appear on the display. Press MEAS to take the first distance measurement (e.g., length). Then measure the width, and then the height. The results of length, width, height, and volume are displayed orderly. - Pythagorean Measurement (Indirect):
Pythagoras measurement can be applied to different flat surfaces. Ensure the vertical edge is perpendicular to the measured object. All measured points should be on the same horizontal or vertical plane. For accurate results, the laser rangefinder should be measured at a fixed rotation point. The right-angle side cannot be larger than the hypotenuse; otherwise, a calculation error will occur.
Pythagorean Method - Two Points:
Press the Area/Volume/Pythagorean button three times to activate this function. The hypotenuse symbol will appear. Take measurements from two points as shown in the figure (e.g., measure to the top and bottom of an object). The height of the object will be calculated automatically and displayed on the screen.
Electronic level and real-time angle measurement. Measures vertical and horizontal distance with one button. Auto-calculates angle, hypotenuse, horizontal, and vertical distances.
Pythagorean Method - Three Points:
Press the Area/Volume/Pythagorean button four times to activate this function. The double hypotenuse symbol will appear. Take measurements from three points as shown in the figure (e.g., measure to the top, middle, and bottom of an object). The height will be calculated and displayed on the summary line. Press ON/OFF/Return/Clear to delete any measured length and then press MEAS to re-measure. - Addition / Subtraction:
For addition, short press the Add(+) / Subtract(-) button. For subtraction, long press the Add(+) / Subtract(-) button. Take a measurement, then press the Add(+) / Subtract(-) button. The addition/subtraction symbol will appear on the display. Press MEAS to take the second measurement. The second value will be automatically added to/subtracted from the first one. This process can be repeated as required. - Historical Memory:
Long press the Historical Memory button to view historical memory. The last 20 measured values will be displayed in reversed order. Press the ON/OFF/Return/Clear button to quit historical value viewing.
6. Maintenance
- Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a dry, dust-free environment, away from extreme temperatures. Remove batteries if the device will not be used for an extended period.
- Calibration: The device is factory calibrated. If you suspect accuracy issues, refer to the troubleshooting section or contact support.
7. Troubleshooting
All errors or failures will be shown as codes on the display. The following table explains the meaning of codes and solutions:
| Code | Cause | Corrective Measure |
|---|---|---|
| 204 | Calculation error | Refer to user manual, repeat the procedures. |
| 208 | Excessive current | Please contact your distributor. |
| 220 | Battery low | Replace new batteries. |
| 252 | Temperature too high | Working temperature of this device is 0°C ~ +40°C (32°F ~ +104°F). |
| 253 | Temperature too low | Working temperature of this device is 0°C ~ +40°C (32°F ~ +104°F). |
| 255 | Received signal too weak or measurement time too long | Use a target plate or change to a good reflective surface. |
| 256 | Received signal too strong | Target too reflective, use a target plate or do not aim at strong light objective. |
| 261 | Outside of the range of measurement | Select the measurement distance within the range of measurement. |
| 500 | Hardware error | Switch on/off the device several times. If the symbol still appears, please contact your dealer for assistance. |
8. Specifications
| Attribute | Value |
|---|---|
| Maximum Measuring Range | 0.2~70m (available in 40m, 60m, 80m, 100m variants) |
| Measurement Accuracy | ±(2.0mm+5x10-5D) |
| Measuring Units | m/ft/in/ft+in |
| Laser Class | Class 2 |
| Laser Type | 630-670nm, < 1mW |
| Area, Volume Measurement | Yes |
| Indirect Pythagorean Theorem | Yes |
| Addition and Subtraction | Yes |
| Continuous Measurement | Yes |
| Min. / Max. Value | Yes |
| Beep | Yes |
| 4-line Display with Backlight | Yes |
| Historical Memory | 20 sets |
| Button Type | Soft rubber buttons |
| Operating Temperature | 0°C~40°C |
| Storage Temperature | -10°C~60°C |
| Battery Life | 5,000 measurement times |
| Battery Type | AAA 2 x 1.5V |
| Auto Laser Off | 30 seconds |
| Auto Instrument Off | 180 seconds |
| Dimensions (mm) | 115x50x30 |
| Battery Included | Yes |
| High-concerned chemical | None |
| Certification | CE |
| Origin | Mainland China |
| Power Type | Battery-Powered |
| Angle Measure | Yes |
9. User Tips
- Fast Measurements: Utilize the quick measurement modes for efficient work.
- One-Button Mute: Use the mute function in quiet environments or when the beep is not desired.
- Backlight for Dark Areas: The large backlit LCD screen is designed for easy reading in low-light conditions.
- Power Saving: The device features a power-saving design with automatic shutdown after 3 minutes of inactivity to conserve battery life.
- PDF Manual: For more detailed instructions and diagrams, refer to the official user manual PDF available at Mileseey S2 User Manual (PDF).
10. Warranty and Support
MILESEEY has been researching and developing laser measurement tools since 2008, focusing on providing high-quality products and customer service. We strive to make your life easier and smarter.
Contact Us
For any concerns or questions, please feel free to reach us via email at info@mileseey.net or visit our website at www.mileseey.net. We strive to reply within 24 hours.
Warranty
- 30-Day Return and Refund Guarantee
- 12-Month Warranty
- Lifetime Technical Support by MILESEEY