Introduction
This manual provides detailed instructions for the proper installation, use, and maintenance of the EDM 07183/07182 Replacement Leg. Please read this manual thoroughly before installation to ensure correct and safe usage.

Image: The EDM 07183/07182 Replacement Leg, featuring a silver finish and a top mounting plate with six pre-drilled holes for secure attachment.
Setup and Installation
Follow these steps to correctly install the replacement leg:
- Preparation: Ensure the appliance or furniture item is stable and safely supported before removing any existing legs or preparing for new installation. Gather necessary tools, which may include a screwdriver or drill, and appropriate fasteners (screws, bolts - not included).
- Identify Mounting Points: Locate the designated mounting area on the underside of your appliance or furniture. The replacement leg features a rectangular mounting plate with six pre-drilled holes.
- Alignment: Carefully align the mounting plate of the replacement leg with the corresponding holes or marks on the appliance/furniture. Ensure the leg is oriented correctly for stability and aesthetics.
- Secure Fasteners: Insert appropriate fasteners (screws or bolts) through the holes in the mounting plate and into the appliance/furniture. Tighten all fasteners securely. Do not overtighten, as this may damage the mounting surface or the leg.
- Stability Check: Once installed, gently place the appliance/furniture back into its upright position. Test the stability by applying light pressure to ensure the leg is firmly attached and provides adequate support. Adjust if necessary.
Operating Instructions
The EDM 07183/07182 Replacement Leg is designed to provide stable and reliable support for compatible appliances or furniture. No specific operational steps are required beyond proper installation.
- Ensure the leg is always placed on a flat, stable surface to prevent wobbling or tipping.
- Avoid placing excessive weight on the appliance/furniture that exceeds its design limits, as this could compromise the leg's integrity.
Maintenance
Regular maintenance helps ensure the longevity and continued stability of your replacement leg:
- Cleaning: Wipe the leg periodically with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or harsh chemicals, which may damage the finish.
- Fastener Check: Every few months, inspect the fasteners securing the leg to the appliance/furniture. Retighten any loose screws or bolts to maintain stability.
- Damage Inspection: Regularly check the leg for any signs of damage, such as cracks, bends, or corrosion. If significant damage is observed, the leg should be replaced to prevent instability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Leg is wobbly or unstable. | Loose fasteners; uneven installation; damaged leg. | Check and tighten all mounting fasteners. Ensure the leg is installed on a flat surface. Inspect for damage and replace if necessary. |
| Leg does not fit the appliance/furniture. | Incorrect model purchased; incompatible mounting pattern. | Verify the model numbers (07183/07182) and compare the mounting plate dimensions and hole pattern with your appliance/furniture. Contact the seller if there is a discrepancy. |
Specifications
| Feature | Detail |
|---|---|
| Model Compatibility | 07182, 07183 |
| Approximate Dimensions (L x W x H) | 20 cm x 20 cm x 10 cm |
| Approximate Weight | 0.06 kg |
| Material | Not specified, appears to be metal alloy with a silver finish. |
| Mounting | Rectangular plate with 6 screw holes. |
User Tips
Based on available information, no specific user tips from reviews or Q&A are provided for this product. General advice for replacement parts includes:
- Always double-check the model number of your appliance/furniture against the replacement part's compatibility before purchase.
- When installing, use fasteners of appropriate length and gauge to ensure a secure fit without causing damage.
Warranty and Support
No specific warranty information is provided with this product. For details regarding warranty coverage, please refer to the original seller or the manufacturer of the appliance/furniture for which this leg is a replacement part.
For further assistance with installation or product inquiries, please contact the seller directly.