MatSee Plus ATMS1602Z

Contents

MatSee Plus ATMS1602Z Tuya Smart ZigBee Electric Meter and Circuit Breaker User Manual

Model: ATMS1602Z | Brand: MatSee Plus

1. Introduction

Thank you for choosing the MatSee Plus ATMS1602Z Tuya Smart ZigBee Electric Meter and Circuit Breaker. This device allows you to monitor energy consumption, remotely control power, and set various timing functions for your electrical appliances via the Tuya Smart Life app. It integrates seamlessly with ZigBee networks and supports voice control through Google Home and Amazon Alexa.

2. Important Safety Information

  • Professional Installation Recommended: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes.
  • ZigBee Gateway Required: This device requires a Tuya ZigBee gateway hub to function. Ensure you have a compatible hub before installation.
  • Voltage and Current Limits: The device is designed for 100-240VAC 50/60Hz. Do not exceed the rated current of 20A. Inrush current exceeding 20A will cause the device to automatically shut off.
  • Correct Wiring: Carefully follow the connection diagrams. The terminals A1 and A2 are for a contact switch only; never input 220V to these terminals, as it will damage the device.
  • Indoor Use Only: This device is intended for indoor use in dry environments.
  • Power Disconnection: Always disconnect power at the main circuit breaker before installing or performing any maintenance on the device.

3. Package Contents

Please check the package for the following items:

  • MatSee Plus ATMS1602Z Smart ZigBee Electric Meter and Circuit Breaker
  • User Manual (this document, also available as a PDF: User manual (PDF))

4. Specifications

FeatureSpecification
Brand NameMatSee Plus
Model NumberATMS1602Z
Rated Voltage100-240VAC 50/60Hz
Rated Current20A
MountingDIN Rail 35 mm
Ambient Temperature Range-10℃ - +60℃
APP CompatibilityTuya, Smart Life
Voice Assistant CompatibilityGoogle Home, Amazon Alexa
Wireless ProtocolZigBee (Note: Not ZigBee 3.0 as per product properties, despite some images showing 'Zigbee 3.0')
WiFi Router FrequencyAccepts 2.4Ghz only
Size86.5*17.5*70.5mm
State of AssemblyReady-to-Go
CertificationCE, RoHS
Contact Configuration1NO (SPST-NO)

Product Dimensions:

Product dimensions showing length, width, and height in millimeters.

Image: Product dimensions (86.5*17.5*70.5mm).

5. Installation

WARNING: Ensure all power is disconnected at the main circuit breaker before beginning installation to prevent electric shock.

5.1. DIN-Rail Mounting

The device is designed for convenient installation on a standard 35mm DIN rail.

Diagram showing the smart meter mounted on a DIN rail inside an electrical panel.

Image: Illustration of the smart meter being mounted on a DIN rail.

5.2. Connection Diagrams

Follow the wiring diagram carefully. Incorrect wiring can cause damage to the device or pose a safety hazard.

Wiring diagram for the smart meter showing Live (L) and Neutral (N) inputs and outputs, and terminals A1 and A2 for a tact switch. Dimensions are also included.

Image: Connection diagram for Live (L) and Neutral (N) input/output, and A1/A2 terminals. Also includes detailed dimensions.

  • Connect the Live (L) and Neutral (N) input wires to the 'IN' terminals.
  • Connect the Live (L) and Neutral (N) output wires to the 'OUT' terminals.
  • The A1 and A2 terminals are for an external tact switch. Do NOT connect 220V to these terminals.

6. Device Setup

6.1. Download and Install the App

The MatSee Plus ATMS1602Z works with the Tuya Smart or Smart Life app. Download the app from your mobile phone's app store (iOS or Android) or by scanning the QR code below:

QR code for downloading the Tuya Smart or Smart Life app.

Image: QR code to download the Tuya Smart or Smart Life app.

6.2. Register an Account

Open the app and follow the on-screen instructions to register a new account or log in if you already have one.

6.3. Add New Device (Pairing)

Ensure your ZigBee gateway hub is powered on and connected to your home Wi-Fi network (2.4GHz only).

  1. Power on the ATMS1602Z device.
  2. Press and hold the button on the device for approximately 5 seconds until the Red LED blinks rapidly. This indicates pairing mode.
  3. Open the Tuya Smart or Smart Life app.
  4. Navigate to your ZigBee gateway in the app.
  5. Select "Add subdevice" or click the "+" icon to search for nearby devices.
  6. Confirm that the device's LED is blinking and proceed with the pairing process in the app.
  7. Once the device is successfully added, you can rename it and click "Done".

Watch this video for a demonstration of the pairing process and app control:

Video: Demonstration of device pairing with a ZigBee gateway and basic app control.

7. Operation

7.1. Remote Control

Once paired, you can control the ON/OFF state of the connected circuit breaker from anywhere using the Tuya Smart or Smart Life app on your smartphone.

Screenshot of the Tuya Smart app interface showing a power button to control the Zigbee Smart Timer.

Image: App interface for remote control (Power On/Off).

7.2. Timing Functions

The device supports various timing functions to automate your appliances:

Screenshots of the Tuya Smart app showing options for Countdown, Schedule, Circulate, and Random timing functions.

Image: App screenshots demonstrating Countdown, Schedule, Circulate, and Random timing functions.

  • Schedule: Set up to 30 ON/OFF programs per day or per week. You can specify exact times and days for the device to turn on or off.
  • Countdown: Set a countdown timer from 1 minute to 23 hours and 59 minutes, after which the device will change its state (ON to OFF, or OFF to ON).
  • Circulate: Create repeating ON/OFF cycles within a specified time frame and on selected days.
  • Random: Introduce randomness to your schedules, useful for simulating occupancy when you are away.
  • Astronomical: Set schedules based on local sunrise and sunset times, with options to adjust for 'before' or 'after' these events.

7.3. Energy Monitoring

Monitor your electricity consumption in real-time through the app:

Screenshots of the Tuya Smart app showing real-time electricity statistics including Today (KWh), Current (mA), Power (W), Voltage (V), and Total (KWh).

Image: App interface displaying electricity statistics (KWh, mA, W, V).

  • View Today's Electricity (KWh)
  • Monitor Current Electricity (mA)
  • Check Current Power (W)
  • See Current Voltage (V)
  • Track Total Electricity (KWh)
  • Review Monthly Electricity (KWh) statistics.

7.4. Over Current Protection

The device features automatic overcurrent protection. If the load current exceeds 20A, the circuit breaker will automatically cut off the circuit to prevent damage and ensure safety.

Diagram illustrating the overcurrent protection mechanism, showing the circuit breaking if the load exceeds 20A.

Image: Diagram showing overcurrent protection at 20A.

7.5. Relay Status and Indicator Modes

You can configure the device's behavior after a power failure and customize the LED indicator behavior:

Screenshots of the app settings for Relay Status (Off, On, Keep as last status) and Indicator Mode (LED off, Indicate switch on/off, Indicate switch location, Indicate LED on).

Image: App settings for Relay Status and Indicator Mode.

  • Relay Status: Configure whether the device should be OFF, ON, or 'Keep as last status' after a power outage and subsequent restoration.
  • Indicator Mode: Choose how the LED indicator behaves: LED off, Indicate switch on/off, Indicate switch location (when light is off, indicates switch position at night), or Indicate LED on.

7.6. Group Control and Device Sharing

  • Create Groups: Group multiple smart devices together for simultaneous control.
  • Share Device: Share control of your device with up to 20 other users via the mobile app.

7.7. Bluetooth Control

If the Wi-Fi signal is disconnected for more than 5 minutes, you can still control the device (ON/OFF) via Bluetooth using the mobile app, provided you are within Bluetooth range.

8. User Tips

  • App Compatibility: This device is designed to work with the Tuya Smart or Smart Life app. It is not compatible with MiHome or other smart home platforms unless explicitly stated.
  • ZigBee Hub is Essential: A dedicated ZigBee gateway hub is required for this device to function, even if you have an Amazon Echo with ZigBee capabilities. The device does not connect directly to voice assistants without a hub.
  • AC Power Only: This device is designed for AC (Alternating Current) power monitoring and control. It is not suitable for monitoring solar photovoltaic production, which typically uses DC (Direct Current).
  • Low Power Readings: If the measured power is less than 3W, the app may display Current Power (W) and Current Electricity (mA) as "0". However, the device continues to accumulate electricity consumption in the background.

9. Troubleshooting

  • Device Not Pairing:
    • Ensure the device's Red LED is blinking rapidly. If not, press and hold the button for 5 seconds to enter pairing mode.
    • Confirm your ZigBee gateway is powered on and connected to a 2.4GHz Wi-Fi network.
    • Make sure your mobile phone is connected to the same 2.4GHz Wi-Fi network during pairing.
    • If the LED is not blinking, try resetting the device by turning it ON-OFF-ON-OFF-ON.
  • Device Disconnects from Network:
    • Check the stability of your Wi-Fi network and the ZigBee gateway.
    • Ensure the device is within range of the ZigBee gateway.
    • If Wi-Fi is unavailable, you can still control the device via Bluetooth through the app for up to 5 minutes after Wi-Fi disconnection.
  • Overcurrent Tripping:
    • If the device automatically cuts off power, the connected load likely exceeds 20A. Reduce the load connected to the device.
  • App Shows 0W/0mA for Low Power:
    • This is normal behavior for loads under 3W. The device is still accumulating energy data, but the real-time display for very low power might show zero.

10. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
  • Avoid Moisture: Keep the device away from water and high humidity environments.
  • Regular Checks: Periodically check the wiring connections to ensure they are secure.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.