Wuzhi Audio ZK-1602T

Contents

ZK-1602T Bluetooth Audio Power Amplifier Module User Manual

Model: ZK-1602T

1. Introduction

This manual provides detailed instructions for the Wuzhi Audio ZK-1602T Bluetooth Audio Power Amplifier Module. This dual-channel stereo amplifier board features independent treble and bass adjustment, supporting AUX, Bluetooth, and USB audio inputs. It is designed for various audio applications, offering robust performance with built-in protection mechanisms.

Front view of the ZK-1602T amplifier board showing treble, bass, and volume controls, along with input ports.

Front view of the ZK-1602T amplifier board.

Angled view of the ZK-1602T amplifier board, highlighting the heat sink and various components.

Angled view of the ZK-1602T amplifier board.

2. Safety & Warnings

  • Read all instructions before use to ensure safety and prevent damage.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Ensure proper power supply voltage and current to avoid damage to the module and connected speakers.
  • Avoid short circuits during wiring and operation.

3. Product Overview

The ZK-1602T is a high-power stereo Bluetooth audio amplifier module featuring 160W x 2 output. It supports multiple audio input methods and offers independent control over treble and bass frequencies.

Diagram showing the ZK-1602T amplifier module with features like 160W+160W output, independent treble and bass adjustment, stereo BT power amplifier module, and AUX+BT+USB inputs. It also notes that the shell needs to be assembled by yourself.

Key features of the ZK-1602T amplifier module.

Component Identification

Diagram labeling the components of the ZK-1602T amplifier board: Power input (5.5x2.1DC plug), Left channel, Right channel, USB_IN, Audio input (BT | AUX), Treble control, Bass control, Volume / switch, and Dial wheel button.

Labeled components of the ZK-1602T amplifier board.

  • Power Input: DC 15-36V via 5.5x2.1DC plug.
  • Left/Right Channel Output: Speaker connections.
  • USB_IN: For USB audio input.
  • Audio Input (BT | AUX): For Bluetooth and AUX connections.
  • Treble Control: Adjusts high frequencies.
  • Bass Control: Adjusts low frequencies.
  • Volume / Switch: Controls overall volume and acts as a power switch.
  • Dial Wheel Button: Multi-functional button for mode switching, track control, and volume adjustment.

4. Setup Instructions

4.1. Package Contents

The amplifier module typically includes the main board, shell components, control knobs, a screwdriver, and various screws for assembly.

Diagram showing the packing list for the ZK-1602T amplifier, including the main board, unassembled shell parts, control knobs, a screwdriver, and various screws. A note indicates the shell needs self-assembly.

Typical packing list. Note: The shell needs to be assembled by yourself.

4.2. Assembly (if applicable)

If the product comes with an unassembled shell, carefully follow the provided instructions to assemble the protective casing around the amplifier board. Ensure all screws are tightened securely.

4.3. Power Supply Connection

Connect a DC 15-36V power supply to the 5.5x2.1DC power input jack. Ensure the power supply can provide sufficient current for the desired output power. The module supports undervoltage protection below 9V, and a 12V power supply can also be supported, though higher voltage (up to 36V) is recommended for maximum output.

4.4. Speaker Connection

Connect your 4-8Ω speakers (30-200W) to the Left and Right channel output terminals. Ensure correct polarity (+ and -) for each speaker.

4.5. Antenna Welding (Optional)

For improved Bluetooth range, an external 2.4G antenna can be welded to the designated antenna base on the board. The antenna and pedestal should be purchased separately.

Diagram showing two examples of antenna welding: one with an antenna base and a 2.4G antenna, and another with direct antenna wire welding. A note states that the antenna and pedestal should be purchased separately.

Antenna welding examples for enhanced Bluetooth reception.

5. Operating Instructions

5.1. Power On/Off

  • Power On: Press and hold the Volume / Switch knob for 3 seconds.
  • Power Off: Press and hold the Volume / Switch knob for 3 seconds.

5.2. Audio Input Selection

The amplifier module has three audio input modes: Bluetooth (BT), AUX, and USB. Short press the dial wheel button to cycle through these modes.

5.3. Volume, Treble, and Bass Adjustment

  • Volume: Rotate the Volume / Switch knob to adjust the overall output volume.
  • Treble: Rotate the Treble control knob to adjust high frequencies.
  • Bass: Rotate the Bass control knob to adjust low frequencies.

5.4. Dial Wheel Button Functions

The dial wheel button provides multiple controls depending on the press duration and rotation:

Diagram illustrating the functions of the dial wheel button: Short press for pause/play, long press to switch mode (USB/BT/AUX). Turning left: short press for previous song, long press for volume -. Turning right: short press for next song, long press for volume +.

Dial wheel button operation guide.

  • Press the dial button in the middle:
    • Short press: Pause/Play
    • Long press: Switch mode (USB/BT/AUX)
  • Turn the dial button to the left:
    • Short press: Previous song
    • Long press: Volume -
  • Turn the dial button to the right:
    • Short press: Next song
    • Long press: Volume +

6. Specifications

Product parameters table for ZK-1602T, listing Product Name, Model, BT Version, Audio Input, Channel, Chip Solution, Adaptive power supply, Adapter Speaker, Output Power, Protection Mechanism, Product Size, Product weight, and a tip about output power.

Detailed product parameters.

FeatureDetail
Product Name2.0 channel audio amplifier module with Tone
Model NumberZK-1602T
Bluetooth Version5.0 (no shielding, 10 meters range)
Audio InputAUX + BT + USB (Dial wheel button toggles song and mode)
Channel2.0 (Left channel + Right channel)
Chip SolutionTDA7498E
Adaptive Power SupplyDC 15-36V (Under voltage protection below 9V, 12V also supported)
Dissipation Power30-200W
Adapter Speaker30-200W, 4-8Ω
Output PowerMax 160W @ R&L channel
Protection MechanismAnti reverse connection, undervoltage, overheating, overcurrent, short circuit protection
Product Size134mm * 80mm * 28mm
Net Product Weight209g
Package Weight257g
ApplicationComputer Audio
TypeVoltage Regulator (as per product properties)
OriginMainland China
ConditionNew
Diagram showing the dimensions of the ZK-1602T amplifier board: 134mm length, 80mm width, and 28mm height. Also lists product and package weights.

Product dimensions and weight.

7. Maintenance & Storage

  • Cleaning: Turn off the equipment before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquid cleaners.
  • Normal Storage: Store the device in a cool, dry place. Avoid prolonged exposure to direct sunlight or extreme temperatures.
  • Long Term Storage: If the device will not be used for an extended period, charge the device to approximately 50% every 3 months to maintain battery health (if applicable, though this module is DC powered).

8. Troubleshooting (Q&A)

This section addresses common questions and issues users may encounter.

Q&A section with common troubleshooting questions and answers regarding power supply, speaker selection, audio input, volume, treble/bass adjustment, sound turbidity, sound lag, and sound quality factors.

Common questions and answers for troubleshooting.

8.1. How to select the power supply?

The power supply matched with this board is very important. The ripple of the selected power supply must be small. The power supply with large ripple will cause the noise at the bottom of the power amplifier board to become larger and there is current sound. The higher the voltage, the greater the current and the more sufficient the output power. If you only have 12V 1A, you can bring a 3-4 inch speaker. If you are above 19V 5A, there is no problem with 8-10 inches. You must pay great attention to the power supply. If the voltage is too low, it is easy to cause sound distortion after sound amplification. If the current is too small to bring up, the horn will pull down the voltage, work abnormally or sound quality will become poor. It is recommended to use 18V19V24V power supply with current above 5A or 32V7A power supply. If you only have 12V 15V 2A power supply, you can also use it, but the power is small. When you use it, the volume is close to the maximum, which may distort and affect the sound quality. If you want to get the maximum output power, it is recommended to use an adapter above 36V7A, a 160W - 200W 4Ω speaker, and adjust the volume to the maximum.

8.2. How to select speaker?

About speaker type: commonly used speakers are generally 4-8 ohms, which can be used. The left and right channel speakers need to be connected with full frequency speakers or medium and high frequency speakers, and the power is between 30W-200W. If your speaker power is small, such as between 20W-50W, it can also be used. You need to reduce the power supply voltage to prevent burning the speaker after loud. For example, choose a power supply below 15V. The higher the selected voltage, the greater the sound or power that can be output. The speaker power should not exceed 200W, otherwise the sound quality will be affected.

8.3. Introduction to audio input mode.

The audio power amplifier module has three audio input modes: BT input, AUX audio input and USB flash disk input. In BT mode, if an audio cable or USB flash disk is inserted, it will automatically switch to audio input mode or USB flash disk input mode, and BT mode is the lowest priority. When the audio cable or USB flash disk has been inserted, you can also use the dial key to switch the mode.

8.4. How to adjust the volume?

The VOL knob adjusts the volume. The right-hand volume increases and the left-hand volume decreases.

8.5. How to adjust the left and right channel treble and bass?

BASS knob controls bass, right-hand bass enhancement and left-hand bass attenuation. When the knob is in the middle position, the bass is neither enhanced nor attenuated. TREBLE knob controls the treble. The right-hand treble is enhanced and the left-hand treble is attenuated. When the knob is in the middle position, the treble is neither enhanced nor attenuated. Note: If the treble and total volume are adjusted to the maximum at the same time, it is easy to cause power amplifier protection and sound jamming. Lower the treble or turn the volume knob on the right to the left to reduce the total volume.

8.6. It's ok to have a small voice, but after the voice becomes louder, there will be the phenomenon of sound turbidity.

The sound is distorted, please turn down the total volume or change the adapter to a higher voltage level.

8.7. It's ok to have a small voice, but when the voice gets louder, there will be the phenomenon of sound lag.

If the input power is insufficient and the power is protected by its own intermittent power failure, please replace the power with a more powerful one. Or the power is too big, the power amplifier heating seriously, appeared the heat protection situation, reduce the power use or strengthen the heat dissipation.

8.8. What factors are associated with sound quality?

The quality of sound is not only related to the power amplifier module, but also to the power supply, sound source and the whole sound system. Basically every link of the sound system will affect the sound quality, among which the main link is the audio transmission line, audio power supply, tone control, amplifier circuits, speakers and the surrounding environment. The sound quality is best when the sound source, power supply, amplifier module and the speaker are matched.

9. User Tips

  • The ZK-1602T is noted for its powerful performance relative to its size and cost-effectiveness, providing reliable audio amplification.
  • For optimal sound quality, ensure your power supply and speakers are well-matched to the amplifier's specifications.
  • Experiment with the treble and bass controls to find your preferred sound profile.

10. Disposal & Recycling

According to the WEEE Directive (2012/19/EU), electronic waste must be recycled at appropriate collection points to prevent potential negative impacts on the environment and human health. Do not dispose of this product with household waste.

11. Warranty & Support

For any issues or support inquiries, please contact your retailer or the manufacturer. Keep your purchase receipt for warranty purposes. This product is designed for general computer audio applications.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.