1. Introduction and Overview
The Tuya CO2 Carbon Dioxide Sensor (Model DCR-CO2) is an intelligent device designed for real-time remote monitoring of carbon dioxide (CO2) concentration in your indoor environment. This sensor utilizes NDIR (Non-Dispersive Infrared) technology for high-precision measurements within a range of 400-5000 PPM, with an accuracy of ±50 PPM.
It integrates seamlessly with the Tuya Smart Life APP, allowing users to view CO2 levels in real-time, receive over-standard alarms, and set up smart home automation. When environmental parameters exceed predefined thresholds, the sensor can automatically control other Tuya-compatible smart devices such as air conditioners, fresh air fans, humidifiers, and air purifiers to optimize your home's air quality.
Important Compatibility Note: This product exclusively supports the Tuya APP and Tuya Zigbee gateway hubs (for the Zigbee version). It does not support MQTT, DIY integrations, or direct docking with other brands of Zigbee gateway hubs or platforms like Yandex. Unauthorized connections or modifications are at your own risk and will not be covered by after-sales service.
Figure 1: Tuya CO2 Sensor highlighting key features.
2. Package Contents
Please check the box for the following items:
- CO2 Box (Sensor Unit) x 1
- Instruction Manual x 1
- Card Pin (for reset) x 1
- USB Power Supply Cord x 1
3. Specifications
| Parameter | Value | Unit |
|---|---|---|
| Working Temperature | -20 to 85 | °C |
| Working Voltage | 5 | V |
| Working Current | 10 to 496 | mA |
| Size (Diameter) | 90 | mm |
| Size (Height) | 35 | mm |
| Power Supply Mode | USB 5V/1A | - |
| Communication Protocol | ZigBee / WiFi (model dependent) | - |
| Color | White | - |
| Shell Material | PVC | - |
| Weight | 95 | g |
| Measuring Range (CO2) | 400-5000 | PPM |
| Accuracy | ±50 | PPM |
CO2 Concentration Levels and Effects:
- 400-1000 PPM: The air is relatively fresh.
- 1000-2000 PPM: The air is cloudy.
- 2000-5000 PPM: It makes people feel dizzy and nauseous.
4. Setup and Installation
4.1. Install the Tuya Smart Life APP
- Scan the QR code below to download the Smart Life APP.
- Install the APP on your mobile device.
- Register a new account or log in with an existing one.
Figure 2: Scan to download Smart Life APP.
4.2. Add Equipment (Zigbee Version)
- Ensure your Tuya Zigbee gateway is connected to your WiFi network and has internet access.
- Use the provided 5V/1A USB power plug and cable to power up the CO2 box.
- After the device powers on, use the included card pin to press and hold the reset key for 5 seconds, then release.
- The indicator light on the CO2 box will flash quickly, indicating it is in pairing mode.
- Open the Smart Life APP, click the "+" icon in the upper right corner to add a device.
- Select the 'Sensor' category and then 'ZigBee sensor'.
- Choose the specific Zigbee gateway you wish to connect the sensor to.
- Confirm that the indicator light of the CO2 box is flashing quickly, then click "Next" to proceed with the network distribution process.
- Once connected, you can assign the device to a room and modify its name. Click "Complete" to enter the device interface.
Figure 3: Steps for adding the Zigbee sensor to the Smart Life APP.
4.3. Add Equipment (WiFi Version)
- Ensure your mobile phone has an active WiFi connection.
- Follow the initial power-up and reset steps as described for the Zigbee version (steps 2-4 in 4.2).
- In the Smart Life APP, select the 'WiFi' option when adding a device and enter your WiFi network password.
- The APP will display a connection progress. Once it reaches 100%, the device will be successfully added.
- Assign the device to a room, modify its name, and click "Complete" to enter the device interface.
5. Operating Instructions
5.1. Real-time Monitoring and Alarms
Once connected, the CO2 sensor will display real-time carbon dioxide concentration levels directly in the Smart Life APP. You will receive notifications if the CO2 concentration exceeds a set value, alerting you to potential hidden dangers.
Figure 4: Real-time CO2 monitoring and alarm notifications in the Smart Life APP.
5.2. Smart Home Linkage Control (Automation Setup)
You can set up automated actions within the Tuya Smart Life APP to control other smart devices based on the CO2 concentration detected by the sensor. This allows for automatic optimization of your indoor air environment.
- In the Smart Life APP, navigate to the 'Smart' section (usually a button at the bottom).
- Click on the 'Automation' tab (or similar, usually at the top).
- Click the "+" icon to create a new smart automation.
- Set Condition: Choose "When device status changes" and select your CO2 Box. Then, select the trigger condition, for example, "CO2 value is greater than [your desired PPM threshold]".
- Set Task: Choose "Run the device" and select the smart device you want to control (e.g., air conditioner, fresh air fan, humidifier, air purifier). Select the specific command (e.g., "Turn On", "Set Mode").
- Review the automation details, give it a name, and choose its effective time.
- Click "Save" and confirm to enable the automation.
An individual CO2 Box can be configured with multiple intelligent automation rules to control various equipment simultaneously.
Figure 5: Smart Life APP automation setup for CO2 sensor.
Video 1: Demonstration of the CO2 sensor's real-time monitoring and alarm functionality with the mobile app.
6. Maintenance
- Placement: Do not place the CO2 Box in areas with heavy lampblack, strong convection air, or high concentrations of organic gases for extended periods, as this may damage the sensor.
- Cleaning: Keep the sensor clean and free from dust accumulation to ensure accurate readings. Use a soft, dry cloth for cleaning.
- Calibration: The sensor typically self-calibrates or stabilizes its readings within two to three days of initial use. Manual calibration is generally not required.
7. Troubleshooting
- Inaccurate Readings (Initial Use): If readings seem high or fluctuate significantly during the first few days, allow the sensor 2-3 days to stabilize. For best initial accuracy, perform the first activation outdoors in fresh air.
- Sensor Not Connecting to APP:
- Ensure the sensor is properly powered via the USB cable.
- Verify your mobile phone has a stable internet connection (for WiFi version) or that your Zigbee gateway is online and connected to the internet (for Zigbee version).
- Confirm the sensor is in pairing mode (indicator light flashing quickly) before attempting to add it in the APP. If not, perform a reset using the card pin.
- Double-check that you are using the official Tuya Smart Life APP.
- Sensor Not Connecting to SmartThings/Home Assistant:
- The Zigbee version requires a Tuya Zigbee gateway. Direct connection to other Zigbee hubs or platforms like Home Assistant (via ZHA/Zigbee2mqtt) or SmartThings may require specific Edge Drivers or custom integrations, which are not officially supported and may not receive after-sales support.
- The WiFi version is designed for the Tuya ecosystem and may not be compatible with other smart home platforms.
- CO2 Reading Not Decreasing: If the CO2 reading remains high (e.g., 1500 PPM) and does not decrease, try performing a reset of the device using the card pin. Ensure proper ventilation in the area.
8. User Tips
- First Activation: For optimal accuracy, perform the initial power-up and stabilization of the sensor outdoors in fresh air. You can use a power bank for portability during this step.
- Power Bank Use: The sensor can be powered by a power bank. A 8000 mAh power bank can provide power for approximately one week.
- Cable Length: The included USB cable is short (20-30 cm). Consider using a longer USB cable if your desired placement requires it.
- SmartThings Integration: If planning to integrate with SmartThings, some users have reported success using Edge Drivers for the Zigbee version. Research community-developed solutions if official support is not available for your specific setup.
- Ventilation Reminder: Use the sensor's readings as a reliable indicator for when to ventilate your space, especially when CO2 levels rise above 1000 PPM.
9. Important Notes and Precautions
- The data provided by this sensor is for general life reference only and should not be considered a substitute for professional detection instruments.
- Avoid placing the CO2 Box in environments with excessive lampblack, strong air currents, or high concentrations of organic gases, as this can lead to sensor damage.
- The Zigbee version requires a Tuya Zigbee gateway. The WiFi version connects directly to your WiFi network. Ensure you have the correct version for your setup.
- Any attempts to connect the device to unsupported platforms (e.g., MQTT, non-Tuya Zigbee hubs, Yandex) or perform unauthorized DIY modifications are at the user's own risk. After-sales service will not be provided for issues arising from such actions.
- A user manual in PDF format is available for download: View User Manual (PDF).
10. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the product listing on the platform where it was purchased. Please note that issues arising from unauthorized modifications or use with unsupported platforms may void your warranty and eligibility for after-sales service.