ICTL70 Multinational Currency Bill Acceptor User Manual

1. Introduction

The ICTL70 is a high-speed, multinational currency bill acceptor designed for integration into various vending machines and automated systems. It features advanced bill validation technology to ensure accurate and secure transaction processing. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your ICTL70 Bill Acceptor.

2. Setup and Installation

The ICTL70 Bill Acceptor is designed for easy integration. Ensure the host machine is powered off before beginning installation.

1. Mounting: Securely mount the bill acceptor into the designated slot within your vending machine or system.
2. Power Connection: Connect the bill acceptor to a stable DC12V power supply. Refer to the wiring diagram of your host machine for correct polarity and connection points.
3. Signal Connection: Connect the multi-colored wiring harness from the bill acceptor to the control board of your host machine. The ICTL70 uses a PULSE output for communication. Ensure correct pin assignments according to your system's requirements.
4. Testing: After installation, power on the host machine and perform a test run by inserting various denominations of bills to verify proper acceptance and signal transmission.

For a visual guide on handling and accessing internal components, please refer to the demonstration video below:

3. Operating Instructions

The ICTL70 Bill Acceptor is designed for straightforward operation:

1. Ensure the host machine is powered on and the bill acceptor is ready to receive currency.
2. Insert bills one at a time into the bill insertion slot.
3. The device is designed to accept bills in ANY DIRECTION.
4. It is crucial to NOT FOLD BILLS before insertion to prevent jams and ensure proper validation.
5. The bill acceptor will process the bill and, if valid, send a pulse signal to the host machine, which will then credit the user or enable the desired function.

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your ICTL70 Bill Acceptor:

• Cleaning: Periodically clean the bill path and sensors using a soft, lint-free cloth. Avoid using abrasive cleaners or solvents.
• Inspection: Regularly inspect the bill acceptor for any signs of wear, damage, or foreign objects.
• Internal Access: If necessary, the unit can be opened for deeper cleaning or inspection of internal components. Refer to Video 1 for a demonstration of how to access the internal mechanism.
• Firmware Updates: Check with the manufacturer or your supplier for any available firmware updates that may improve performance or add new currency support.

5. Troubleshooting

If you encounter issues with your ICTL70 Bill Acceptor, consider the following common problems and solutions:

• Bills Not Accepted:
  • Ensure bills are not folded or excessively wrinkled.
  • Clean the bill path and sensors.
  • Check power and signal connections.
  • Verify the bill acceptor is configured for the specific currency being used.
• Bill Jams:
  • Power off the host machine.
  • Carefully open the bill acceptor (refer to Video 1) and remove the jammed bill.
  • Inspect for any obstructions or damaged components.
• No Power:
  • Check the DC12V power supply and all power connections.
  • Ensure the host machine is providing power to the bill acceptor.
• Incorrect Credit:
  • Verify the signal connection to the host machine's control board.
  • Ensure the host machine's software is correctly configured to interpret the pulse signals from the bill acceptor.

6. Specifications

7. User Tips

• Currency Compatibility: The ICTL70 is advertised as a 'Multinational Currency' acceptor. However, specific currency recognition may depend on the model's configuration or firmware. If you intend to use it with a particular currency, especially for regions like Malaysia, confirm compatibility with your supplier or the manufacturer.
• Clean Bills: Always try to insert clean, unfolded bills. This significantly reduces the chance of jams and ensures accurate validation.
• Regular Checks: For commercial applications, schedule regular checks and cleaning to prevent operational disruptions.

8. Warranty and Support

For warranty information, technical support, or service inquiries regarding your YingLucky ICTL70 Bill Acceptor, please contact your original point of purchase or the manufacturer directly. Ensure you have your product model number (ICTL70) and any serial numbers available when seeking support.