Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your YAMAHA RX-E600 remote control. This remote is an original replacement designed to be compatible with specific YAMAHA audio systems, including CRX-E150/200 and E400/E300 models. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.

2. Setup

2.1 Battery Installation

The remote control requires two AAA batteries (not included).

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery cover.
3. Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery cover securely.

Note: Always replace both batteries at the same time. Do not mix old and new batteries, or different types of batteries. Remove batteries if the remote will not be used for an extended period to prevent leakage.

3. Operating Instructions

The RX-E600 remote control utilizes Infrared (IR) communication to operate your YAMAHA audio system. Ensure there is a clear line of sight between the remote control and the audio system's IR receiver for proper functionality.

3.1 Key Functions Overview

• POWER: Turns the audio system on or off.
• Numeric Buttons (0-9, +10, +100): For direct track selection, radio station input, or other numerical entries.
• PLAY/PAUSE, STOP, FAST FORWARD, REWIND: Control playback of audio sources (e.g., CD, Tape, MD).
• REP (Repeat), RANDOM, PROG (Program): Select various playback modes.
• TUNER: Selects the tuner function for radio playback.
• MD, DVD, TAPE, AUX: Selects various input sources connected to your audio system.
• VOLUME UP/DOWN: Adjusts the audio output level.
• MUTE: Temporarily silences the audio output.
• DISPLAY: Changes the information shown on the audio system's display.
• MODE/DUBBING/START: Specific functions for tape recording or other media operations.
• SLEEP: Activates the sleep timer function.
• PRESET +/-: Navigates through stored radio presets.
• TAPE DIRECTION: Changes the playback direction for tape decks.
• RESET: Resets certain settings or functions.

Note: Specific button functionalities may vary slightly depending on the exact YAMAHA audio system model. Refer to your audio system's original manual for detailed function descriptions.

4. Maintenance

4.1 Cleaning

• Wipe the remote control with a soft, dry cloth.
• For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution, then wipe dry immediately.
• Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface and markings.

4.2 Storage

• Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• If the remote will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device.

5. Troubleshooting

5.1 Remote Control Not Responding

• Check battery polarity. Ensure batteries are inserted correctly.
• Replace old batteries with new ones.
• Ensure there is a clear line of sight between the remote and the audio system's IR receiver.
• Make sure the remote is pointed directly at the audio system's IR receiver.
• Verify that the audio system is powered on.

5.2 Limited Range

• Replace batteries with fresh ones.
• Remove any obstructions between the remote and the audio system.
• Ensure no strong light sources (e.g., direct sunlight, fluorescent lights) are interfering with the IR signal.

5.3 Specific Function Not Working

• Confirm the remote is compatible with your specific YAMAHA audio system model (CRX-E150/200, E400/E300).
• Refer to your audio system's original manual for specific function details, as some features may require specific modes or settings on the audio system itself.

6. Specifications

7. User Tips

• Compatibility Check: This remote is specifically designed for YAMAHA CRX-E150/200 and E400/E300 audio systems. If your model is not listed (e.g., Yamaha CDX-E 100), it may not be fully compatible or function correctly. Always verify your audio system's model number before use.
• Battery Life: For optimal performance, use high-quality alkaline batteries. Remove batteries if the remote will be unused for extended periods to prevent corrosion.

8. Warranty and Support

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the point of purchase. Keep your proof of purchase for warranty validation.