1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Heltec Active Equalizer Balancer. This device is designed to actively balance battery cells in various configurations, ensuring optimal performance and longevity for your battery packs. It supports Ternary Lithium, Lithium Iron Phosphate (LiFePO4), and Lithium Titanate (LTO) battery types across a wide range of series configurations (3S-21S).

2. Key Features
- Wide Voltage Range: Operates efficiently within 1.8V-4.5V.
- Broad Battery Compatibility: Suitable for Ternary Lithium, Lithium Iron Phosphate (LiFePO4), and Lithium Titanate (LTO) battery types.
- Active Balancing: Utilizes capacitor charge transfer for active energy equalization across cells.
- High Balance Current: Achieves an equilibrium current of 0-5.5A, with current decreasing as the battery approaches balance.
- Precision Balancing: Maintains balance voltage accuracy within 5mV.
- Low Quiescent Current: Approximately 12mA.
- Under-Voltage Sleep Protection: Automatically stops operation when voltage drops below 3.0V, with standby power consumption less than 0.1mA.
- No External Power Required: Relies on the internal energy transfer of the battery for balancing.
- Robust Design: Features original new ultra-low internal resistance MOS and 2OZ copper thickness PCB.
3. Technical Specifications
| Technical Index | Product Model (SKU by default) | |||||
|---|---|---|---|---|---|---|
| Product Model | 0855A | 1004A | 0877A | 1400 | 0999A16 | 1323 |
| Battery Strings | 3S-4S | 4S-6S | 6S-8S | 9S-14S | 12S-16S | 17S-21S |
| Battery Type | NCM/LFP/LTO | |||||
| Working Voltage Range | NCM/LFP: 2.8V-4.2V | LTO: 1.8V-3.0V | |||||
| Voltage Balancing Accuracy | 5mV (typical) | |||||
| Balance Mode | The whole group of battery participates in the active equalization of energy transfer at the same time. | |||||
| Balancing Current | 0.08V differential voltage generates 1A balance current. The differential voltage is larger, the balance current is larger. The maximum allowable balance current is 5.5A. | |||||
| Under Voltage Protection Sleep Voltage | NCM/LFP: 2.8V | LTO: 1.8V | |||||
| Static Working Current | 13mA | 8mA | 8mA | 15mA | 17mA | 16mA |
| Working Temperature | -10°C ~ 60°C | |||||
| External Power | No need for external power supply, relying on the internal energy transfer of the battery to achieve the whole group balance. | |||||
| Product Size (mm) | 66*46*16 | 69*69*16 | 91*70*16 | 125*80*16 | 125*91*16 | 145*130*18 |

Package Dimensions:
- Length: 16 cm
- Width: 13 cm
- Height: 4 cm
- Weight: 0.32 kg
4. Safety Precautions
- Always ensure correct polarity when connecting the balancer to the battery pack. Incorrect connections can damage the device and battery.
- Work in a well-ventilated area.
- Avoid short-circuiting the battery terminals or balancer connections.
- Do not expose the balancer to moisture or extreme temperatures outside its operating range.
- Keep out of reach of children.
- If the balancer shows signs of damage or malfunction, discontinue use immediately.
5. Installation and Setup
The balancer connects directly to your battery pack's cell taps. Ensure all connections are secure and correctly wired according to the diagrams below.
5.1. LTO Battery Configuration
For Ternary Lithium (NCM) and Lithium Iron Phosphate (LFP) batteries, the default welding state is generally suitable. However, for Lithium Titanate (LTO) batteries, specific modifications are required:
- Disconnect points 2 and 3.
- Connect points 1 and 2 by welding.

5.2. Wiring Diagrams
Connect the balancer to your battery pack using the provided wiring harness. Follow the specific diagram for your battery series configuration:






6. Operation
Once correctly connected, the active balancer will automatically begin the equalization process. The capacitor-based charge transfer mechanism works to balance the voltage across all cells in the battery pack. The balancing current is proportional to the voltage difference between cells, with a 0.08V differential generating 1A of balance current, up to a maximum of 5.5A. As the cell voltages become more equal, the balancing current will naturally decrease.
An indicator light on the balancer board will illuminate when the battery is actively balancing. The balancing process continues until all cells are within the specified voltage accuracy (typically 5mV difference).
7. Maintenance
- Keep the balancer clean and free from dust and debris.
- Periodically check all wiring connections for tightness and corrosion.
- Ensure the operating environment temperature remains within -10°C to 60°C.
- Avoid physical impact or excessive vibration to the balancer board.
8. Troubleshooting
- Balancer not activating: Check all wiring connections for correct polarity and secure contact. Ensure the battery pack voltage is within the specified working range.
- Slow balancing: For large capacity battery packs (e.g., 60-300AH recommended), the balancing process may take a longer time. This is normal.
- LED indicator not lighting up: Verify that the balancer is correctly connected and the battery cells are within the operational voltage range. If the voltage difference is minimal, the balancer might not be actively transferring charge, or the LED might indicate a fault.
- Overheating: If the balancer feels excessively hot, immediately disconnect it and check for short circuits or incorrect wiring.
9. User Tips
- Wiring Gauge: When connecting the balancer, use appropriate wire gauge for the current. A 1mm² cable has been noted as suitable by users.
- Battery Compatibility: This balancer is compatible with 18650 cells, as long as they are Ternary Lithium, LiFePO4, or LTO types and configured within the supported series (3S-21S).
- Unused Wires: If your battery pack has fewer cells than the balancer supports (e.g., an 11S pack with a 14S balancer), ensure any unused balance wires are properly insulated to prevent short circuits. Do not leave them unconnected and exposed.
10. Warranty and Support
For detailed warranty information and further technical support, please refer to the official user manual PDF available at Heltec Active Balancer User Manual (PDF).
You may also contact HeltecBMS directly for support:
- Email: Jacqueline@heltec-bms.com
- WhatsApp/Tel: +86 18583756538