1. Product Overview
The LAUNCH CR3008 PLUS is an advanced ARM platform diagnostic tool designed to meet the comprehensive needs of the DIY car market. It offers full OBD functions, including graphical data stream display, battery voltage testing, diagnostic trouble code (DTC) lookup, and multi-language support.


2. Setup
The LAUNCH CR3008 PLUS is designed for plug-and-play operation, requiring no internal battery as it draws power directly from the vehicle's OBD-II port.
2.1 Connecting to Your Vehicle
- Locate the OBD-II diagnostic port in your vehicle. This is typically found under the dashboard on the driver's side.
- Ensure the vehicle's ignition is OFF before connecting the scanner.
- Plug the scanner's OBD-II connector firmly into the vehicle's diagnostic port.
- Turn the vehicle's ignition to the ON position (engine can be off). The scanner will power on automatically.
3. Operating Instructions
The CR3008 PLUS features an easy-to-use menu system for quick navigation through its diagnostic functions.
3.1 Menu Navigation
Use the directional buttons (up, down, left, right) to navigate through the menu options displayed on the 2.8-inch TFT True Color LCD screen. Press the 'OK' button to confirm a selection and the 'Return' button to go back to the previous screen.
3.2 Full OBDII Test Modes
The scanner supports all 10 modes of OBDII testing, providing comprehensive vehicle diagnostics:
- Read Codes: Displays Diagnostic Trouble Codes (DTCs) stored in the vehicle's computer.
- Erase Codes: Clears DTCs from the vehicle's computer and turns off the Check Engine Light (MIL).
- I/M Readiness: Checks the readiness of the emission monitoring systems. This can be performed with a single click.
- Data Stream: Displays live data parameters from the vehicle's sensors in real-time, often with graphical representation to show transient changes.
- Freeze Frame: Shows a snapshot of operating conditions at the time an emission-related fault occurred.
- O2 Sensor Test: Retrieves O2 sensor monitor test results for the most recently completed tests from the vehicle's on-board computer.
- On-Board Monitoring (Mode $6): Retrieves test results for emission-related powertrain components and systems that are not continuously monitored.
- Evap System Test (Mode $8): Initiates a test of the evaporative emission control system.
- Vehicle Information: Displays the vehicle identification number (VIN), calibration identification (CALID), and calibration verification number (CVN).


3.3 DTC Lookup
The DTC Lookup function allows you to search for code definitions stored in the device's code library, saving time from searching online.

3.4 Live Data on Graph
View live data streams graphically to easily identify transient changes in engine or battery performance that might not be obvious in numerical data.

3.5 Battery Test
The device includes a battery test function to check the voltage status of your vehicle's battery. This is an upgrade from basic OBD2 scanners, providing quick insight into battery health.

3.6 Data Record and Replay
The CR3008 PLUS allows you to record diagnostic data for later review and replay, which is useful for analyzing intermittent issues or tracking changes over time.
3.7 Data Print
You can print diagnostic reports by connecting the device to a computer and using the provided software. This allows for easy documentation and sharing of vehicle data.
4. Maintenance
4.1 Software Update
The LAUNCH CR3008 PLUS offers lifetime free software updates to ensure compatibility with new vehicle models and to provide the latest diagnostic features. The update process is simple:
- Download the CR3008 PLUS application from the official LAUNCH website.
- Connect your CR3008 PLUS device to your computer via a USB cable.
- Copy the downloaded application files to your CR3008 PLUS device.

5. Troubleshooting
- Device not powering on: Ensure the OBD-II connector is securely plugged into the vehicle's diagnostic port and the vehicle's ignition is in the ON position. The device draws power directly from the vehicle.
- No communication with vehicle: Verify that your vehicle is OBD2 compliant (most vehicles after 1996 in the US, 2002 in EU, and 2008 in Asia). Check the connection to the OBD-II port. If issues persist, ensure your vehicle's protocols are supported.
- Inaccurate readings: Ensure the device software is up-to-date. Check for any loose connections.
- If the CR3008 Plus cannot work with your OBD2 protocol car: Please provide your car information to the seller for optimization.
6. Specifications
| Parameter | Specification |
|---|---|
| Screen | 2.8 inch TFT True Color LCD |
| Interface | Standard OBDII interface |
| Diagnostic Device Size | 165mm * 92mm * 35mm |
| Weight | <360g |
| Storage Temperature | -20°C to 70°C |
| Operating Temperature | -10°C to 50°C |
| Voltage | 12 V (from vehicle OBD-II port) |
| Measurement Accuracy | ±0.3% |
| Material | Plastic |
| Electronic | Yes |
| Wireless Support | Other (not specified as Wi-Fi/Bluetooth) |
| Software Version | 2024 (latest) |
| Hardware Version | Latest |
| External Testing Certification | CE |
| Batteries Included | No (powered by vehicle) |
6.1 Vehicle Compatibility
The LAUNCH CR3008 PLUS is compatible with approximately 99% of cars that support OBD-II protocols:
- US Vehicles: Generally compatible with vehicles manufactured after 1996.
- EU Vehicles: Generally compatible with vehicles manufactured after 2002.
- Asian Vehicles: Generally compatible with vehicles manufactured after 2008.
If you are unsure about your car's compatibility, please provide your car's make, model, and year to the seller for verification (e.g., "Toyota Corolla, 2008").

7. Warranty and Support
7.1 Warranty Information
- Hardware Warranty: One (1) year from the date of purchase.
- Repair Parts Warranty: Six (6) months from the date of repair.
7.2 Software Updates
Software upgrades for the LAUNCH CR3008 PLUS are permanently free, ensuring your device remains up-to-date with the latest vehicle data and diagnostic capabilities.
7.3 Additional Resources
For a detailed user manual in PDF format, please refer to the official documentation: User Manual (PDF)
8. User Tips
- The device does not have a built-in battery; it powers on when connected to the vehicle's OBD-II port.
- The battery tester function checks voltage but does not perform a load test.
- Software updates are seamless and easy to perform.
- Users have reported successful operation on vehicles like Opel Insignia 2015 and Renault Master 2018.
- Some users reported incompatibility with certain Mitsubishi models. Always verify compatibility if unsure.
9. Frequently Asked Questions (FAQ)
- Q: Is the Opel Corsa 1.3 CDTI compatible with the Launch Diag tool?
A: Please provide the full year of your Opel Corsa 1.3 CDTI to the seller for a precise compatibility check. Generally, EU vehicles after 2002 are compatible. - Q: Will it work for a Wreat Weall Wringle Five 2.2 gasoline truck?
A: For specific truck models, it's best to confirm with the seller by providing the exact year and model details to ensure compatibility with OBD2 protocols. - Q: Is it compatible with BYD cars?
A: Compatibility with BYD cars depends on the specific model and year, as well as its adherence to OBD2 standards. It is recommended to contact the seller with your BYD model and year for confirmation.