1. Introduction
This product is a DIY kit consisting of a plastic shell and a PCB (Printed Circuit Board) for assembling a Dayi 88F lithium-ion battery pack. It is designed for individuals with professional knowledge and practical experience in battery assembly. This manual provides instructions for the safe and correct assembly of 18650/21700 Li-ion battery cells into the provided housing with the protection board.
Note: This product does NOT include battery cells.
2. Important Safety Warnings & Disclaimers
- Professional Knowledge Required: To use this product, you need to have professional knowledge and experience in battery assembly. We do not guarantee that you can use it well without the necessary expertise.
- Required Tools: You must have 18650/21700 POWER Li-ion batteries and tools such as spot welding machines, soldering irons, multimeters, and suitable chargers.
- No After-Sales Service: This product has no after-sales service. After placing an order, it will not be returned or refunded. Please purchase with caution.
- Product Variations: The size and color shown in pictures are for reference only. The actual received goods may vary. If you have objections based on "color and size differences," please do not purchase.
- PCB & LED Variations: PCB color (blue, white, green, red, etc.) and version number may differ based on current inventory. LED color (red, green, blue) may also vary. PCB design may change due to supply chain and processing technology, but function and performance are guaranteed. Different labels may be used. By ordering, you agree to these terms and cannot dispute based on these variations.
- Critical Pre-Assembly Step: Ensure that the voltage of each 18650/21700 cell is the same before welding the PCB. Failure to do so can result in damage or malfunction.
3. Package Contents
This product is available in different package options. Please verify your order against the contents listed below:
3.1. "PCB" Package
This package includes the essential components for the protection board and connections, but no battery housing.
3.2. "BOX PCB" Package
This comprehensive package includes all components for assembling a complete battery pack housing with the protection board.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | dawupine |
| Model Number | DAYI-ETA88F |
| Type | Battery Storage Box |
| Battery Compatibility | 18650 / 21700 Li-ion Power Batteries (up to 10 pieces) |
| High-concerned chemical | none |
| Origin | Mainland China |
| Package (with battery) | No |
4.1. Package Dimensions
- Length: 15 cm
- Width: 9 cm
- Height: 9 cm
- Weight: 0.25 kg
5. Setup & Assembly
5.1. Pre-Assembly Preparation
- Battery Cell Selection: Use only 18650 or 21700 power lithium battery cells.
- Voltage Equalization (New Cells): If using new battery cells, ensure that a group of 5 or 10 cores is equipped with resistance and capacitance to make their voltage identical.
- Voltage Equalization (Old/Repaired Cells): If repairing an old battery, test the voltage at both ends of each cell. If the voltages differ, charge each cell to the same voltage value before proceeding.
- Required Tools: Gather all necessary tools, including a spot welding machine, soldering iron, multimeter, and suitable battery charger.
5.2. Assembly Steps
Follow these steps carefully to assemble your battery pack:
- Insert Battery Cells: Place the prepared 18650/21700 Li-ion cells into the battery cell holders. Ensure correct polarity. The housing is designed to hold 10 cells.
- Connect Cells with Metal Strips: Use the provided metal connection strips to link the battery cells according to the wiring diagram. Spot welding is typically used for this step to ensure secure and low-resistance connections.
- Attach PCB: Carefully attach the PCB to the assembled battery pack. Solder the main positive (B+) and negative (B-) terminals, as well as the balance leads (B1, B2, B3, B4) from the battery cells to the corresponding points on the PCB. Refer to the wiring diagram for precise connections.
- Wiring Diagram: The following diagram illustrates the correct wiring for a 5S battery configuration. Ensure all connections are secure and correctly polarized.
- Enclose in Shell: Once all internal connections are made and verified, carefully place the assembled battery pack into the plastic shell. Secure the shell using the provided screws.
5.3. Assembly Overview Video
For a visual guide on the assembled product, please refer to the video below:
Video 1: A 360-degree rotation view of the assembled battery box.
6. Operating Instructions
Once assembled, the battery pack functions as a power source for compatible Dayi 21V tools (e.g., 128VF, 328VF).
- Charging: Use a charger compatible with 21V Li-ion battery packs. The PCB provides charging protection.
- Discharging: Connect the battery pack to your tool. The PCB also offers discharge protection to prevent over-discharging.
- Monitoring: Some PCBs may include LED indicators for battery status. Refer to your specific PCB for details.
7. Maintenance
- Storage: Store the battery pack in a cool, dry place away from direct sunlight and extreme temperatures.
- Regular Charging: For optimal battery life, avoid fully discharging the battery pack frequently. Charge it regularly, even during periods of non-use.
- Inspection: Periodically inspect the battery pack for any signs of damage, swelling, or corrosion. Discontinue use if any issues are detected.
- Cleaning: Keep the exterior of the battery box clean and free from dust and debris.
8. Troubleshooting
- Battery Pack Not Charging:
- Check if the charger is correctly connected and functioning.
- Verify all internal wiring connections on the PCB and cells.
- Ensure the battery cells are healthy and balanced.
- Battery Pack Not Powering Tool:
- Confirm the battery pack is fully charged.
- Check connections between the battery pack and the tool.
- Inspect the PCB for any visible damage or loose connections.
- Overheating:
- Immediately disconnect the battery pack if it becomes excessively hot.
- This could indicate a short circuit, damaged cells, or an issue with the PCB. Seek professional assistance.
9. User Tips
- Voltage Matching is Key: Always ensure all individual battery cells have the same voltage before assembly and welding to prevent cell imbalance and potential damage to the pack or PCB.
- Use Quality Cells: Invest in high-quality 18650/21700 power cells for better performance and longevity of your DIY battery pack.
- Double-Check Polarity: Before making any connections, especially welding, double-check the positive and negative polarities of each cell and the PCB to avoid short circuits.
10. Frequently Asked Questions (FAQ)
- Q: Why might the PCB or LED color be different from the product images?
- A: PCB color (e.g., blue, white, green, red) and LED color (e.g., red, green, blue) may vary based on the manufacturer's current inventory and supply chain changes. The functionality and performance of the product remain the same.
- Q: Can I return the product if I find color or design differences?
- A: No, as stated in the safety warnings, the product has no after-sales service, and returns/refunds are not accepted for reasons related to color, size, PCB design changes, or different labels, as long as the function and performance are guaranteed.
- Q: Are batteries included with this product?
- A: No, this product is a shell case and PCB kit only. Battery cells are not included and must be purchased separately.
11. Warranty & Support
As this product is a DIY (semi-manufactured) component requiring specialized knowledge and tools for assembly, it is sold without any after-sales service, warranty, or return/refund policy. Users are responsible for ensuring they have the necessary expertise and equipment before purchase and assembly.
For further assistance with general battery assembly practices, please consult reputable online resources or professional electricians.