Mileseey PF3S PF260

Contents

Mileseey PF3S PF260 Dual Display Golf Rangefinder

Instruction Manual

Model: PF3S PF260

1. Introduction

Thank you for choosing the Mileseey PF3S PF260 Dual Display Golf Rangefinder. This device is designed to provide accurate distance measurements for golf, hunting, and other outdoor activities. It features a clear dual LCD display, slope compensation technology, flagpole lock with pulse vibration, and multiple measurement modes to enhance your experience.

2. Safety Information

Laser Safety

This device uses a Class 1 laser product, which is safe under all conditions of normal use. However, please observe the following precautions:

  • Do not stare directly into the laser beam.
  • Do not aim the device at the sun or other bright light sources.
  • Keep the device out of reach of children.

Battery Safety

  • Use only the specified battery type (CR2).
  • Ensure correct polarity when inserting batteries.
  • Do not mix old and new batteries, or different types of batteries.
  • Remove batteries if the device will not be used for an extended period.

General Precautions

  • Avoid dropping or subjecting the device to strong impacts.
  • Do not disassemble or attempt to repair the device yourself.
  • Keep the device dry and clean.

3. Package Contents

Please check that all items are present in your package:

  • Mileseey PF3S PF260 Golf Rangefinder
  • Protective Case
  • Wrist Strap
  • CR2 Battery
  • Carabiner
  • Instruction Manual
Mileseey PF3S PF260 Golf Rangefinder package contents including the device, case, strap, battery, and manual.
Figure 3.1: Package Contents

4. Product Overview

Familiarize yourself with the different parts of your rangefinder:

Diagram of the Mileseey PF3S PF260 Golf Rangefinder with labeled parts: Eyepiece knob, Eyepiece, Power/Measurement button, Mode/Unit switch button, External display, External display switch button, Angle switch, Strap eyelet, Battery compartment, 1/4 inch-20 Tripod Mount, Objective Lens/Laser Emitter, Laser receiving lens.
Figure 4.1: Product Diagram and Labeled Parts
  1. Eyepiece Knob: Adjusts diopter for clear view.
  2. Eyepiece: Viewing lens.
  3. Power/Measurement Button: Powers on/off and initiates measurement.
  4. Mode/Unit Switch Button: Cycles through measurement modes and switches units (Yards/Meters).
  5. External Display: Shows measurement data externally.
  6. External Display Switch Button: Toggles the external display on/off.
  7. Angle Switch: Physical switch to enable/disable slope compensation.
  8. Strap Eyelet: Attachment point for the wrist strap.
  9. Battery Compartment: Houses the CR2 battery.
  10. 1/4"-20 Tripod Mount: For mounting on a tripod.
  11. Objective Lens/Laser Emitter: Transmits the laser beam.
  12. Laser Receiving Lens: Receives the reflected laser beam.

5. Setup

5.1 Battery Installation

  1. Locate the battery compartment (9) on the device.
  2. Twist the battery compartment cap counter-clockwise to open.
  3. Insert one CR2 battery, ensuring the positive (+) and negative (-) terminals are correctly aligned.
  4. Replace the battery compartment cap and twist clockwise to secure.

5.2 Initial Power On and Diopter Adjustment

  1. Press the Power/Measurement button (3) to turn on the device.
  2. Look through the eyepiece (2). If the display is not clear, rotate the Eyepiece Knob (1) until the display and target appear sharp. This adjusts the diopter to your vision.

6. Operating Instructions

6.1 Power On/Off

  • Press the Power/Measurement button (3) once to turn on the device.
  • The device will automatically power off after a period of inactivity to conserve battery.

6.2 Unit Selection (Yards/Meters)

  • While the device is powered on, press and hold the Mode/Unit Switch Button (4) to toggle between Yards (Yd) and Meters (m).

6.3 External Display On/Off

  • Press the External Display Switch Button (6) to turn the external LCD display on or off.
A person using the Mileseey rangefinder, showing the clear dual display screen with real-time data visible both internally and on the external LCD.
Figure 6.1: Clear Dual Display Screen

6.4 Measurement Modes

The rangefinder offers various measurement modes. Press the Mode/Unit Switch Button (4) repeatedly to cycle through the available modes.

Diagram illustrating the wide application modes of the rangefinder: Speed Measuring Mode, Flagpole Lock Ranging Mode, Golf Slope Adjusted Mode, Point-to-Point Ranging Mode, and Distance Height Angle Measurement.
Figure 6.2: Wide Application Modes

6.4.1 Flag Pin Lock with Pulse Vibration (PF3S White Version Only)

This mode is ideal for golf. When targeting a flagpole, the device will provide a short vibration to confirm it has locked onto the flag, ignoring background objects. The flagpole locking function supports distances up to 300 yards.

Image showing the rangefinder locking onto a flag on a golf course, with a vibration icon indicating successful lock.
Figure 6.3: Flag Pin Lock Feature

6.4.2 Slope On/Off Switch

The physical Angle Switch (7) allows you to manually enable or disable the slope compensation feature. This is crucial for tournament play where slope-adjusted distances are often prohibited. Slide the switch to the desired position.

Diagram showing the rangefinder display with slope enabled (showing compensated distance and angle) and slope disabled (showing only actual distance).
Figure 6.4: Slope On/Off Technology

6.4.3 Distance, Height, and Angle Measurement

This mode allows you to measure the distance to a target, its height, and the angle of inclination/declination.

Diagram illustrating how the rangefinder measures distance, height, and angle to a tree, showing two measured distances and the calculated height and angle.
Figure 6.5: Distance, Height, Angle Measurement

6.4.4 Point-to-Point Ranging Mode

Use this mode to measure the horizontal distance between two points.

Diagram showing the rangefinder measuring the distance between two power line towers, indicating two measured distances and the calculated horizontal distance.
Figure 6.6: Point-to-Point Ranging Mode

6.4.5 Speed Measuring Mode

This mode allows you to measure the speed of a moving object.

6.5 Product Demonstration Video

Video 6.1: Product demonstration, including battery installation, power-on, and various measurement modes.

7. Maintenance

7.1 Cleaning

  • Lenses: Use a soft, clean microfiber cloth specifically designed for optics. Do not use abrasive materials or harsh chemicals.
  • Body: Wipe the device body with a soft, damp cloth. Avoid excessive moisture.

7.2 Storage

  • Store the rangefinder in its protective case when not in use.
  • Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
  • For long-term storage, remove the battery to prevent leakage.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not power onLow or dead battery; Incorrect battery installationReplace the CR2 battery; Ensure correct polarity (+/-)
Inaccurate measurementsObstruction in line of sight; Unstable hand; Target too far or too close; Weather conditions (fog, heavy rain)Ensure clear line of sight; Hold device steady; Check measurement range; Avoid use in extreme weather
Display is blurryDiopter not adjustedRotate the Eyepiece Knob (1) to adjust the diopter until the display is clear.
External display not workingExternal display turned offPress the External Display Switch Button (6) to turn it on.

9. Specifications

FeatureSpecification
Brand NameMiLESEEY
Model NumberPF3S PF260
Measurement Range3.3 to 875 yards (700m)
Measurement Accuracy±0.55 yard (±0.5m)
Telescope Magnification6X
Field Angle7°
Diopter Adjustment±5D (within 500 degrees)
Unit SelectionM/Yard
Power TypeBattery-Powered
Battery IncludedYes (CR2)
CertificationCE
Dimensions122 x 75 x 42 mm
Weight223g
Protective CaseYes

10. User Tips

  • External Display: Utilize the external LCD display to easily share readings with partners or for quick reference without looking through the eyepiece.
  • Tournament Play: Remember to use the physical Angle Switch to disable the slope compensation feature when participating in golf tournaments that prohibit its use.
  • Specific Applications: For niche uses like carpfishing, test the device's ability to accurately detect markers in your specific environment before relying on it for critical measurements.
  • Portability: The compact design and included protective case make it easy to carry and protect your rangefinder during outdoor activities.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Mileseey website. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.