1. Introduction
The DOOYA DM25LEU-1.1/20 is a compact and efficient tubular motor designed for automating various window coverings such as rolling blinds, Roman curtains, and sun blinds. It features a built-in rechargeable lithium battery and operates via RF433 wireless remote control, offering convenience and ease of use. This motor is specifically designed for use with 38mm diameter tubes.

Figure 1: DOOYA DM25LEU Tubular Motor with built-in battery and USB charging cable.
2. Safety Information
- Read all instructions carefully before installation and operation.
- Ensure the motor is installed by a qualified professional if you are unsure about any steps.
- Keep children and pets away from the motorized blinds during operation.
- Do not expose the motor to water or extreme temperatures.
- Use only the provided charging cable and a compatible DC5V/2A power adapter for charging.
- Do not attempt to open or repair the motor or battery pack. Contact support for assistance.
3. Package Contents
Please check the package for the following items:
- 1 x DOOYA DM25LEU Tubular Motor (with built-in Li battery)
- 1 x USB Charging Cable
- Instruction Manual (this document)

Figure 2: Typical package contents.
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | DM25LEU-1.1/20 |
| Rated Torque | 1.1 N.m |
| Rolling Speed | 20 r/min |
| Wattage | 8W |
| Protection Class | IP44 |
| Battery Type | Built-in Lithium Battery |
| Battery Capacity | 2200mAh |
| Charge Voltage | DC5V/2A |
| Control Method | RF433 Wireless Remote Control |
| Max Load | 3 kg |
| Min Blind Width | 0.5 m |
| Max Blind Width | 2.5 m |
| Max Blind Area | 8 m² |
| Certification | CE |

Figure 3: Detailed product specifications and features.
5. Installation and Setup
5.1 Tube Compatibility
The DM25LEU motor is designed to fit into a 38mm diameter tube. Ensure your existing or new blind tube matches this specification for proper installation.

Figure 4: The DM25 motor is compatible with 38mm tubes (right), not 28mm (left).
5.2 Converting Manual Blinds to Motorized
To convert a manual rolling blind to a motorized one, follow these general steps:
- Remove the existing manual rolling mechanism from the blind tube.
- Insert the DOOYA DM25LEU motor into the 38mm blind tube.
- Secure the motor within the tube and attach the end cap.
- Install the motorized blind back into its mounting brackets.

Figure 5: Visual guide for converting a manual blind to motorized.
6. Charging the Motor
The DM25LEU motor comes with a built-in rechargeable lithium battery. Proper charging ensures optimal performance and battery longevity.
- Before first use, fully charge the motor for at least 10 hours.
- Connect the provided USB charging cable to the USB plunge port on the motor's end cap.
- Connect the other end of the USB cable to a DC5V/2A power adapter (not included).
- It is recommended to fully charge the motor once every 3 months to extend battery life, even if not in regular use.

Figure 6: USB charging port location.

Figure 7: USB plunge and Reset Key on the motor end cap.
7. Remote Control Pairing and Operation
The DM25LEU motor operates using an RF433 wireless remote control (sold separately). The following steps outline the pairing process and basic operation.
7.1 Pairing the Remote Control
To pair your DOOYA RF433 remote control with the motor:
- Ensure the motor is powered on and fully charged.
- Locate the "Reset Key" or "Program Button" on the motor's end cap (refer to Figure 7).
- Press and hold the Reset Key on the motor until it jogs slightly (a short movement) or emits a beep.
- Within a few seconds, press the "UP" button on your remote control. The motor should jog again, indicating successful pairing.
- Test the remote control by pressing the UP, DOWN, and STOP buttons.
Video 1: Remote Control Pairing Demonstration.
7.2 Basic Operation
Once paired, use the remote control to operate your motorized blinds:
- UP Button: Moves the blind upwards.
- DOWN Button: Moves the blind downwards.
- STOP/MY Button: Stops the blind at its current position or moves it to a pre-set "My" position (if configured).

Figure 8: Example of a compatible DOOYA DC2700 Single Channel Remote Control.
8. Maintenance
- Battery Maintenance: To prolong battery life, fully charge the motor at least once every three months, even if it has not been used frequently.
- Cleaning: Wipe the motor and exposed parts with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the blind and motor for any signs of wear or damage. Ensure the blind moves freely without obstruction.
9. Troubleshooting
- Motor not responding to remote:
- Check if the motor battery is charged.
- Ensure the remote control battery is functional.
- Re-attempt the pairing process (Section 7.1).
- Verify that the remote control is within the effective range of the motor.
- Blind not moving smoothly:
- Check for any obstructions in the blind's path.
- Ensure the blind fabric is properly aligned in the tube.
- Verify that the motor is securely installed within the tube and brackets.
- Motor makes unusual noise:
- Stop operation immediately.
- Inspect for any loose parts or obstructions.
- If the noise persists, contact customer support.
10. User Tips
- Initial Charge: Always perform a full 10-hour charge before the first use to condition the battery.
- Tube Size: This motor is specifically designed for 38mm tubes. Using it with incorrect tube sizes may lead to malfunction or damage.
- Remote Control: Remember that the remote control is a separate purchase. Ensure you have a compatible RF433 remote for operation.
11. Warranty and Support
The DOOYA DM25LEU Tubular Motor comes with a 5-year warranty, ensuring quality and reliability. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the manufacturer directly.

Figure 9: DOOYA product certifications.