1. Product Overview
The VICTGOAL VG103 is a high-quality cycling helmet designed for adults, suitable for both men and women. It features a lightweight integrated design, excellent ventilation, detachable magnetic goggles, and an ultra-bright LED rear light for enhanced safety and comfort during various cycling activities.
2. Safety Information
This helmet complies with stringent safety standards to ensure maximum protection. Always wear your helmet correctly adjusted for optimal safety.
- Certifications: CE, CPSC 16 CFR 1203 (U.S. standard for bicycle helmets).
- Ensure the helmet fits snugly and the chin strap is securely fastened.
- Replace the helmet after any significant impact, even if visible damage is not apparent.
3. Setup and Adjustment
3.1 Head Circumference Measurement
To ensure a proper fit, measure your head circumference before adjusting the helmet.
- Wrap a measuring tape around your head, keeping the tape level from front to back, about 2.5 cm (1 inch) above your eyebrows.
- Note the measurement and reference the size guide. The VG103 helmet is suitable for head circumferences between 57-61 cm (22-24 inches).
3.2 Helmet Fit Adjustment
The helmet features a stable and convenient size adjuster at the rear. Rotate it to achieve the desired tightness and a secure fit.
- Place the helmet on your head.
- Turn the size adjuster dial clockwise to tighten, or counter-clockwise to loosen, until the helmet feels snug but comfortable.
- Ensure the helmet sits level on your head and does not tilt forward or backward.
3.3 Chin Strap and Quick Release Buckle
Adjust the chin strap for a secure fit. The thickened chin pad provides comfort and absorbs sweat.
- Fasten the quick-release buckle under your chin.
- Adjust the straps so that they form a 'V' shape under your ears.
- Tighten the chin strap so that it is snug against your throat, allowing only one or two fingers to fit between the strap and your chin.
- To release, press the buckle with one hand.
3.4 Attaching/Detaching Magnetic Goggles
The helmet comes with detachable magnetic goggles that easily attach to the helmet's front.
- To attach: Align the magnets on the goggles with the corresponding magnets on the helmet and let them snap into place.
- To detach: Gently pull the goggles away from the helmet.
- The goggles can be worn in three ways: without goggles, goggles up (for casual cycling), or goggles down (to protect eyes from sand, wind, and sunlight).
4. Operating Instructions
4.1 LED Rear Light Operation
The integrated LED rear light enhances visibility, especially during low-light conditions. It has three flashing modes.
- To turn on/change mode: Press the button located on the rear light.
- Available modes: Steady On, Slow Flashing, Quick Flashing.
- To turn off: Cycle through the modes until the light turns off.
4.2 Using Magnetic Goggles
The magnetic goggles provide effective UV protection and can be interchanged with different lenses for various conditions.
- Black Goggles: Reduce sunlight interference, block sand and wind, and are friendly to myopic glasses wearers.
- Yellow Lens: Ideal for night cycling, increases contrast and improves clarity.
- Crystal Lens: Suitable for all-day use, blocks foreign objects and provides a clear view.
- Colorful Lens: Best for sunny days, improves contrast and restores true colors.
5. Maintenance
5.1 Cleaning the Helmet
- Outer Shell: Wipe with a soft, damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
- Inner Padding: The inner padding is 360° coverage, soft, breathable, and easy to wash. Detach the padding and hand wash with mild soap and water. Allow to air dry completely before reattaching.
- Goggles: Clean lenses with a soft, lint-free cloth and lens cleaner. Do not use abrasive materials that could scratch the lenses.
5.2 LED Rear Light Battery Replacement
The LED rear light is powered by a CR1632 battery. An extra battery is typically included with the helmet.
- To replace the battery, carefully open the battery compartment on the rear light.
- Remove the old CR1632 battery and insert a new one, ensuring correct polarity.
- Close the battery compartment securely.
6. Troubleshooting
- Helmet feels loose/tight: Adjust the size adjuster dial at the back of the helmet. Ensure the chin strap is also properly adjusted.
- LED Rear Light not working: Check if the battery (CR1632) needs replacement. Ensure the battery is inserted with correct polarity.
- Magnetic Goggles not staying in place: Ensure the magnets on both the goggles and the helmet are clean and free from debris. Check for any physical damage to the magnets.
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Magnetic Goggles Helmet |
| Brand Name | Victgoal |
| Model Number | VG103 |
| Type | Light Helmet |
| Material | PC Shell + EPS Foam |
| Weight (g) | About 280G |
| Air Vents | 28 Air ventilation Openings |
| Head Circumference | 22-24 inch (57-61 cm) |
| Audience | Unisex Adults Men and Women |
| Occasion | Mountain & Road Cycling, Scooter, E-bike |
| Accessory | Detachable Magnetic Goggles, Safety Led Rear Light |
| Led Light Flashing Modes | Steady on, Slow Flashing, Quick Flashing |
| Safety Certificate | CPSC 16 CFR 1203, CE |
| Style | Fashion & Modern Stylish |
8. User Tips
Based on common questions and user feedback, here are some helpful tips:
- Versatile Use: This helmet is designed for a wide range of activities including mountain biking, road cycling, scooter riding, and e-bike use.
- Goggle Compatibility: The magnetic goggles are designed to be friendly to myopic glasses wearers, allowing you to wear your prescription glasses comfortably underneath.
- Ventilation: The 28 air vents are highly effective at quickly removing internal heat, keeping you cool during rides.
- Unisex Design: The helmet is suitable for both adult men and women, offering a comfortable and secure fit for a broad audience.
9. Warranty and Support
For any issues or support inquiries, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
The product is certified with CE and CPSC 16 CFR 1203 standards, ensuring it meets recognized safety requirements.