Introduction
The Sansui P300 is a versatile Bluetooth speaker designed to enhance your audio experience at home. It functions as a powerful stereo subwoofer, a computer desktop speaker, and includes an integrated alarm clock. With multiple playback options and a sleek design, it offers a comprehensive audio solution.
Package Contents
Please check the package for the following items:
- Sansui P300 Bluetooth Speaker
- Remote Control
- Power Adapter (AC)
- AUX Audio Cable (may vary by package)
Product Overview
The Sansui P300 features a wooden cabinet design with a front-facing LED display and control buttons. It includes multiple input options for versatile use.
Front Panel
- LED Display: Shows time, mode, and other status indicators.
- Control Buttons: MODE, Previous Track, Play/Pause, Next Track, Clock/Alarm Set.
Rear/Side Panel
- USB Port: For U disk playback.
- TF Card Slot: For TF card playback.
- AUX Input: For connecting external audio devices via 3.5mm cable.
- Power Input: For connecting the AC power adapter.
Setup
- Power Connection: Connect the provided AC power adapter to the speaker's power input port and then plug it into a wall outlet. The speaker will power on automatically or can be turned on using the power button.
- Initial Power On: Upon first use, the LED display will light up.
- Setting the Clock: Use the 'Clock/Alarm Set' button on the speaker or remote to adjust the time. Follow the on-screen prompts to set the hour and minute.
Operating Instructions
Mode Selection
Press the 'MODE' button on the speaker or remote control to cycle through available input modes: Bluetooth, AUX, TF Card, and U Disk.
Bluetooth Playback
- Switch the speaker to Bluetooth mode. The LED display will indicate 'BT' or a similar pairing indicator.
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select 'Sansui P300' from the list to pair. Once connected, the speaker will emit a confirmation sound.
- You can now play audio from your device through the speaker.
AUX Playback
- Connect one end of the 3.5mm AUX audio cable to the AUX input port on the speaker.
- Connect the other end to the headphone jack or audio output of your external device.
- Switch the speaker to AUX mode using the 'MODE' button.
- Play audio from your external device.
TF Card / U Disk Playback
- Insert a TF card into the TF card slot or a U disk (USB flash drive) into the USB port.
- Switch the speaker to TF Card or U Disk mode. The speaker will automatically detect and play audio files (MP3, FLAC, APE, WAV formats are supported).
Alarm Clock Function
- Press and hold the 'Clock/Alarm Set' button to enter alarm setting mode.
- Use the 'Previous Track' and 'Next Track' buttons to adjust the hour and minute.
- Press the 'Clock/Alarm Set' button again to confirm each setting.
Remote Control
The included remote control allows for convenient operation of the speaker from a distance. Functions include power on/off, mode selection, volume control, track skipping, and play/pause.
Hands-free Calls
When connected via Bluetooth to a smartphone, the built-in microphone allows you to answer and make calls directly through the speaker.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's surface. Do not use liquid cleaners or abrasive materials.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Water: The speaker is not waterproof. Keep it away from water and high humidity.
Troubleshooting
- No Power: Ensure the power adapter is securely connected to both the speaker and a working power outlet.
- No Sound: Check the volume level on both the speaker and your connected device. Ensure the correct input mode is selected. For Bluetooth, verify the device is paired and connected. For AUX, ensure the cable is fully inserted.
- Bluetooth Disconnection/Failure to Pair: Make sure the speaker is in Bluetooth pairing mode. Keep your device within 10 meters of the speaker. Disconnect and re-pair the device if issues persist. Ensure no other Bluetooth devices are interfering.
- Remote Control Not Working: Check the battery in the remote control and replace if necessary. Ensure there are no obstructions between the remote and the speaker.
Specifications
| Feature | Specification |
|---|---|
| Brand | Sansui (SwYiSm) |
| Model | P300 |
| Output Power | 15W*2 (Total 30W) |
| Bluetooth Version | 5.0 |
| Bluetooth Distance | ≤ 10 meters |
| Distortion Rate | THD1% |
| Horn Size | 2.5 inches (approx. 86mm) |
| Signal-to-Noise Ratio | ≥75dB(A) |
| Input Voltage | DC 15V/2A |
| Frequency Range | 60Hz-20KHz |
| Overall Product Size | 400 x 142 x 90 mm |
| Input/Output | USB, AUX, Bluetooth, Audio Line |
| Sound Mode | 3D Surround Sound Mode |
| Use | Home, Computer Desktop |
| Cabinet Material | Wood |
| Playback Function | MP3, FLAC, APE, WAV |
| Display Screen | Yes |
| Built-in Microphone | Yes |
| Remote Control | Yes |
| Support Memory Card | Yes (TF Card) |
| Power Source | AC |
| PMPO | 60 W |
| Channels | 2 (2.0) |
User Tips
- For optimal sound quality, place the speaker on a stable, flat surface to minimize vibrations.
- Keep the remote control within line of sight of the speaker for best responsiveness.
- When using Bluetooth, ensure your connected device is fully charged to avoid interruptions during playback.
- Experiment with speaker placement to find the best acoustic experience for your room.
Warranty & Support
For warranty information and customer support, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.