MiLESEEY PF210

Contents

Mileseey PF210 Golf Laser Rangefinder User Manual

Model: PF210

Introduction

The Mileseey PF210 Golf Laser Rangefinder is a compact and lightweight device designed for accurate distance, speed, and angle measurements in golf, hunting, and other outdoor activities. It features advanced TOF (Time of Flight) technology and an angle slope compensation system for precise readings.

Mileseey PF210 Golf Laser Rangefinder with icons for compact, lightweight, accuracy, golf slope, and speed measuring

Figure 1: Mileseey PF210 Golf Laser Rangefinder highlighting key features.

Package Contents

Ensure all items are present upon unboxing:

  • Mileseey PF210 Golf Laser Rangefinder
  • Premium Carrying Pouch with Hook
  • CR2 Battery
  • User Manual (this document)
Mileseey PF210 carrying pouch with hook

Figure 2: Included premium carrying pouch.

Device Overview

Diagram of Mileseey PF210 with labeled parts: Measure Key/ON/OFF, Measure mode/unit change, Eyepiece/Eyepiece Knob, Battery compartment, Laser receiving lens, Objective lens

Figure 3: Key components of the PF210 Rangefinder.

  • Measure Key/ON/OFF: Short press to switch on the device and initiate measurement. Press and hold for continuous measurement.
  • Measure Mode/Unit Change (M button): Short press to change measurement mode. Press and hold to change units (meters/yards).
  • Eyepiece/Eyepiece Knob: Rotate to adjust diopter for clear viewing.
  • Battery Compartment: Houses the CR2-3V battery.
  • Objective Lens: The front lens through which light enters.
  • Laser Receiving Lens: Receives the reflected laser beam.

Setup

  1. Battery Installation:

    Open the battery compartment. Insert the provided CR2-3V battery, ensuring correct polarity. Close the compartment securely.

    Video 1: Demonstration of battery installation and diopter adjustment.

  2. Diopter Adjustment:

    Rotate the eyepiece knob to adjust the diopter until the view through the eyepiece is clear and sharp for your vision.

Operating Instructions

The PF210 offers multiple measurement modes. Use the 'M' button to cycle through modes and the 'Measure' button to activate measurements.

1. Power On and Basic Measurement

  1. Short press the Measure Key/ON/OFF button to turn on the device.
  2. Aim the crosshairs at your target.
  3. Short press the Measure Key again to get a single distance measurement.
  4. For continuous measurement, press and hold the Measure Key. Release to stop.

2. Changing Measurement Modes

Short press the 'M' button to cycle through the available measurement modes:

  • Distance Measurement: Standard mode for measuring linear distance.
  • Continuous Scan: Allows for scanning multiple targets or a moving target.
  • Flagpole Lock Mode (Close-range priority):

    Short press 'M' to switch to flagpole lock mode. Aim at the target (e.g., flagpole) and scan around it. The flag icon will flash and then stop after approximately 1.5 seconds, indicating the nearest target has been locked. The measured distance will be displayed. This mode prioritizes close-range objects, useful for distinguishing a flag from background objects.

    Diagram showing flagpole lock mode operation, with the rangefinder identifying a flagpole and displaying its distance

    Figure 4: Flagpole Lock Mode for accurate flag targeting.

  • Golf Slope Adjust Mode:

    Short press 'M' to switch to golf slope adjusted mode. Aim at the target (B) and short press the Measure Key. The measured distance between A and B, the slope adjusted distance, and the angle will be displayed on the screen accordingly. This compensates for uphill and downhill shots.

    Diagram illustrating golf slope adjusted mode, showing actual distance, adjusted distance, and angle for a golf shot

    Figure 5: Golf Slope Adjust Mode for compensated distances.

  • Speed Measurement:

    Short press 'M' to switch to speed measurement mode. Aim at a moving object and press the Measure Key. The speed will be displayed in Km/h. Speed Measuring Range: 18 ~ 300km/h.

3. Changing Units (Meters/Yards)

From any measurement mode, press and hold the 'M' button to switch between meters (m) and yards (Yd).

Specifications

Table of product specifications for Mileseey PF210, including Model, Range, Battery type, Units, Accuracy, Laser type, Eye safety, View of field, Magnification, Objective lens diameter, Eyepiece diameter, Exit pupil diameter, Diopter, Diopter adjustment method, Operating temperature, Golf slope adjusted mode, Flagpole lock, Distance measurement, Continuous measurement, Display, Size, Weight without battery

Figure 6: Detailed product specifications.

Mileseey PF210 Product Specifications
FeatureDetail
ModelPF210
Range600m / 660 yards
Battery TypeCR2-3V *1 (included)
UnitsM/Yd (Meters/Yards)
Accuracy±0.5m / ±0.55 yard
Laser Type905 nm
Eye SafetyFDA (CFR 21) Class 1 Laser
View of Field7°
Magnification6X
Objective Lens Diameter22mm
Eyepiece Diameter16mm
Exit Pupil Diameter3.7mm
Diopter±5D
Diopter Adjustment MethodEyepiece adjustment
Operating Temperature0°C ~ +40°C
Golf Slope Adjusted ModeYes
Flagpole LockYes (up to 200 yards)
Distance MeasurementYes
Continuous MeasurementYes
DisplayLCD
Size110*65*38mm
Weight (without battery)164g

Maintenance

  • Cleaning Lenses: Use a soft, clean cloth specifically designed for optics to gently wipe the lenses. Do not use abrasive materials or harsh chemicals.
  • Cleaning Body: Wipe the body of the rangefinder with a soft, damp cloth. Avoid excessive moisture.
  • Storage: Store the device in its protective pouch in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.
  • Avoid Impact: Protect the device from drops and strong impacts, which can damage internal components.
Mileseey PF210 Golf Laser Rangefinder showing ergonomic and anti-slip design, held in a hand

Figure 7: Ergonomic and anti-slip design for comfortable handling.

Troubleshooting

  • Device not powering on: Check if the CR2 battery is correctly installed and has sufficient charge. Replace if necessary.
  • Inaccurate readings: Ensure the lenses are clean and free from obstructions. Make sure you are in the correct measurement mode for your target.
  • Display unclear: Adjust the diopter by rotating the eyepiece knob until the display is sharp.
  • Flagpole not locking: Ensure the target is within the 200-yard flagpole lock range. Scan around the flagpole to help the device identify it.

User Tips

  • For best results, hold the rangefinder steady during measurement. Using a stable surface or bracing your arm can improve accuracy.
  • When using flagpole lock, try to aim slightly above the flag and then slowly move down onto the flag to help the device identify it.
  • The slope compensation feature is particularly useful for golf, providing a "plays like" distance that accounts for elevation changes.

Warranty and Support

The Mileseey PF210 Laser Rangefinder is a Class 1 laser product and is eye-safety certified with FDA (CFR21). For any product-related inquiries or support, please refer to the seller's contact information or the official Mileseey website.

The product typically includes a CR2 battery and a user manual. For detailed warranty information, please consult the documentation provided with your purchase or contact the seller directly.

© 2023 MiLESEEY. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.