Product Overview
The EONKO WS-267BT is a portable Bluetooth speaker designed in a unique crystal car shape bus, featuring vibrant LED lights, multiple playback options, and hands-free calling. This manual provides detailed instructions for its safe and efficient use, ensuring you get the most out of your device.
Image: The EONKO WS-267BT speaker available in multiple colors, showcasing its unique bus design.
Video: A demonstration of the EONKO WS-267BT speaker, highlighting its LED lights and sound capabilities.
Safety Information
- Do not expose the speaker to water or moisture as it is not waterproof.
- Keep the device away from extreme temperatures, direct sunlight, and open flames.
- Do not attempt to disassemble, modify, or repair the speaker yourself. Contact qualified service personnel if issues arise.
- Use only a 5-volt USB power source for charging to prevent damage.
- Keep out of reach of children and pets.
Package Contents
- EONKO WS-267BT Bluetooth Speaker
- Integrated Audio Connection Wire and USB Power Wire
- User Manual (this document)
Setup
1. Charging the Speaker
Before initial use, fully charge the speaker. Connect the integrated Audio Connection Wire and USB Power Wire to a standard 5-volt USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will illuminate to show the charging status. Once fully charged, disconnect the cable. A full charge provides approximately 90-120 minutes of playback time.
2. Power On/Off
Press and hold the power button (typically located on the back or side of the speaker) for a few seconds to turn the speaker ON or OFF. You will hear an audible prompt indicating the power status.
3. Bluetooth Pairing
- Ensure the speaker is ON and in Bluetooth pairing mode (indicated by a flashing LED or an audible prompt like 'Bluetooth mode').
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "WS-267BT" from the list of discovered devices.
- Once successfully paired, the speaker will confirm with an audible sound, and the LED indicator will change to a steady light.
4. TF Card / U Disk Playback
Insert a TF (MicroSD) card or a USB flash drive (U disk) containing MP3 audio files into the respective slot on the speaker. The speaker will automatically detect the storage device, switch to the appropriate mode, and begin playing music from it.
5. FM Radio
Switch the speaker to FM radio mode. Extend the antenna (if present) for optimal reception. Use the control buttons to automatically scan for available stations (typically a long press on the Play/Pause button) and then short press the 'Next' or 'Previous' buttons to navigate between saved stations.
6. AUX Input
Connect an external audio device (e.g., MP3 player, laptop, non-Bluetooth phone) to the speaker's AUX port using the provided audio connection wire. The speaker will automatically switch to AUX mode, allowing playback from the connected device.
Operating Instructions
1. Volume Control
The volume can be controlled directly using the dedicated volume keys on the speaker. A short press on the '+' button typically increases the volume, and a short press on the '-' button decreases the volume.
2. Music Playback
- Play/Pause: Press the Play/Pause button once to start or pause music playback.
- Next Track: Short press the 'Next' button (often the '+' button, or a dedicated forward arrow).
- Previous Track: Short press the 'Previous' button (often the '-' button, or a dedicated backward arrow).
3. Hands-Free Calling
When the speaker is connected via Bluetooth to your mobile phone, you can use it for hands-free communication:
- Answer Call: Press the Play/Pause button once to answer an incoming call.
- End Call: Press the Play/Pause button once during a call to end it.
- Reject Call: Press and hold the Play/Pause button for a few seconds to reject an incoming call.
4. Self-Timer Function
The speaker supports a self-timer function when connected via Bluetooth. This feature allows you to remotely trigger your phone's camera shutter. Consult your phone's camera settings or a compatible camera application for specific instructions on how to activate and use this function with a Bluetooth device.
5. LED Lights
The speaker features integrated LED lights that illuminate during operation, enhancing the visual appeal of the car shape bus design. The lights typically operate automatically when the speaker is on, providing a dynamic visual experience.
Maintenance
- Cleaning: Use a soft, dry, lint-free cloth to clean the exterior surfaces of the speaker. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.
- Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Care: To prolong the lifespan of the built-in battery, avoid fully discharging it frequently. It is recommended to charge the speaker regularly, even if it's not in active use, to maintain battery health.
- Water Exposure: This speaker is NOT waterproof. It is crucial to avoid exposing it to rain, splashes, high humidity, or submerging it in water. Any liquid contact can cause irreversible damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Low or depleted battery. | Connect the speaker to a 5-volt USB power source and charge it fully. |
| No sound from the speaker. | Volume too low; incorrect playback mode selected; device not properly connected/paired. | Increase the speaker's volume; ensure your source device's volume is also up. Verify the correct mode (Bluetooth, TF, USB, AUX) is selected. Re-pair Bluetooth or re-connect AUX/storage device. |
| Bluetooth connection fails or is unstable. | Speaker not in pairing mode; source device too far; interference from other devices. | Ensure the speaker is in Bluetooth pairing mode. Move your source device closer to the speaker (within 10 meters). Turn off other Bluetooth devices nearby. Try restarting both the speaker and your source device. |
| FM radio has static or poor reception. | Weak signal strength. | Extend the antenna fully. Move the speaker to an open area, away from obstacles or electronic interference. Rescan for stations. |
| TF card or U disk not playing. | Incorrect file format; card/disk not inserted correctly; corrupted files. | Ensure audio files are in MP3 format. Reinsert the TF card/U disk firmly. Try with a different card/disk or different MP3 files. |
Specifications
| Feature | Specification |
|---|---|
| Brand Name | EONKO |
| Model | WS-267BT |
| Item Condition | New |
| Category | Speakers, Portable Speakers |
| Use | Home |
| Speaker Type | Portable |
| Channels | 2 (2.0) |
| Sound Mode | Stereo Sound Mode |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 2 |
| Horn | 2*52MM 4Ω 5W External Magnetism |
| Output Power | 2*5 W (Total 10W) |
| PMPO | 10 W |
| Input Power(W) | <25 W |
| Frequency Response (Speaker) | 100-18KHz |
| Frequency Range (General) | 2KHz-20KHz |
| Sensitivity | 80 |
| Bluetooth Version | 5.0 |
| Communication | Bluetooth, USB |
| Power Source | Battery, USB |
| Battery Capacity | Built-in 18650 battery, 1200mAh |
| Playtime | 90-120 minutes (approx.) |
| Input/Output | USB |
| Support Memory Card | Yes (TF card, U disk) |
| Playback Function | MP3 |
| FM Radio | 88-108 MHz |
| Display Screen | Yes |
| Built-in Microphone | Yes |
| Voice Control | No |
| Remote Control | No |
| Waterproof | No |
| Support APP | No |
| Material (Cabinet) | Plastic |
| Material (Subwoofer cabinet) | Plastic |
| Material (Woofer/Widerange) | Metal |
| Material (Tweeter) | Polymer |
| Tweeter Type | HORN |
| Acoustic Enclosure | Sealed |
| Product Size | 218mm * 106mm * 96mm |
| Product Weight | 750g |
| Certifications | CE, FCC, RoHS |
User Tips
- Optimal Sound: For the best audio experience, place the speaker on a flat, stable surface, ideally at ear level.
- Battery Longevity: Avoid leaving the speaker completely discharged for extended periods. If storing the speaker, ensure it has at least a 50% charge.
- FM Reception: If FM reception is poor, try moving the speaker to a different location or adjusting its orientation. Buildings and other electronics can interfere with signals.
- Bluetooth Range: Keep your paired device within approximately 10 meters (33 feet) of the speaker for a stable and uninterrupted Bluetooth connection. Obstacles like walls can reduce this range.
- File Compatibility: Ensure all audio files on your TF card or U disk are in MP3 format for guaranteed playback.
Warranty and Support
The EONKO WS-267BT speaker comes with a one-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase (e.g., order number, receipt) for any warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer's customer service. Refer to your purchase documentation for specific contact details.
This product is certified with CE, FCC, and RoHS standards, ensuring compliance with relevant safety and environmental regulations.
