Product Overview
The Benro FH150M2N1 Square GND Filter Holder is a high-quality accessory designed for professional photographers using ultra-wide-angle lenses, particularly the Nikon 14-24mm. This system allows for the convenient use of 150mm square filters, including Graduated Neutral Density (GND) filters, to enhance landscape and architectural photography. Its robust aluminum construction and thoughtful design features ensure secure filter placement and ease of use in various shooting conditions.
Unboxing the Benro FH150M2N1 Filter Holder
Video: A detailed unboxing of the Benro FH150M2N1 filter holder kit, showcasing all included components and packaging.
Included Components

- 1x 150mm Filter Holder
- 1x fr1515 Filter Frame
- 1x fr1517 Filter Frame
- 1x 95-77 Adapter Ring
- 1x FH15LR95 Adapter Ring
Setup and Installation
Attaching the Filter Holder to Your Lens
- Identify the correct adapter ring for your lens. The FH150M2N1 is specifically designed for the Nikon 14-24mm lens, but other adapter rings (e.g., 95-77, FH15LR95) are included for broader compatibility.
- Screw the appropriate adapter ring onto the front thread of your camera lens.
- Align the filter holder with the adapter ring. The filter holder features a lens locking knob (often blue) to secure it to the adapter ring.
- Rotate the filter holder until it clicks into place or is securely fastened by tightening the lens locking knob. Ensure it is firmly attached to prevent accidental detachment.

Inserting Square Filters
The Benro FH150M2N1 filter holder is designed to accommodate 150mm square filters with a thickness of 2mm. It can hold up to three pieces of filters simultaneously.
- Gently slide your desired square filter into one of the available filter slots on the holder.
- The holder features an anti-dropping design with a precise stop to prevent filters from accidentally falling out.
- For CPL filters, mounting is more convenient within the square frame of this system.

Operating Instructions
Adjusting Filter Position
The filter holder features an accurate gear rotation adjustment mechanism for precise control over your filters.

- Safety Button: Press the red safety button to pull and adjust the knob.
- Adjustment Knob: Use the red adjustment knob to precisely move the graduated filter up and down to find the most suitable position for your shot.
- Movable Block: The movable block helps in securing the filter's position.
- Locking Knob: Once the desired position is achieved, push the knob to the stop of 'N' to lock the filter in place.
Preventing Light Leakage
The filter holder is designed with a tight structure to ensure the filter fits closely, preventing unwanted light leakage that could affect your images.

Care and Maintenance
- Cleaning: Use a soft, lint-free cloth to clean the filter holder and adapter rings. Avoid abrasive materials or harsh chemicals.
- Storage: Store the filter holder and its components in a clean, dry place, preferably in its original packaging or a protective case, to prevent dust accumulation and scratches.
- Handling: Always handle the filter holder and filters with care to avoid dropping or impact, which could cause damage. The filter frames are designed to be anti-fingerprint and anti-dropping for added protection.

Troubleshooting
- Filters Falling Out: Ensure the safety button is engaged and the locking knob is pushed to the 'N' position after inserting the filter. The precise stop mechanism is designed to prevent filters from falling.
- Light Leakage: Verify that the filter is fully seated within the holder and that the holder is securely attached to the lens. The tight structure of the holder minimizes light leakage.
- Difficulty Attaching/Detaching: Check for any debris or misalignment between the adapter ring and the lens, or between the filter holder and the adapter ring. Ensure all components are clean and properly aligned.
Specifications
| Feature | Detail |
|---|---|
| Model Number | FH150M2N1 |
| Type | Filter Holder |
| Brand Name | Benro |
| Origin | Mainland China |
| Material | Aluminum Frame, ABC Clamp |
| Filter Holder System | 150mm |
| Compatible Lens (General) | Suitable for ultra-wide lenses below 14mm |
| Square Filter Dimensions | 150mm (width), 2mm (thickness) |
| Mount Diameter | 95mm or exclusive mount |
| Package Dimensions | 25cm (L) x 25cm (W) x 10cm (H) |
| Package Weight | 0.2 kg |
Compatible Lenses (Specific Examples)

| Model | Compatible Lens |
|---|---|
| FH150M2C1 | CANON EF 14f/2.8 II USM |
| FH150M2C2 | CANON TS-E17mm f/4L |
| FH150M2E1 | SONY FE-12-24mm f/4G (SEL1224G) |
| FH150M2N1 | NIKON AF-S Nikkor 14-24mm f/2.8G ED |
| FH150M2T1 | TAMRON SP 15-30mm f/2.8 Di VC USD |
| FH150M2S1 | SIGMA 12-24mm f/4.5-5.6 EX DG HSM II |
| FH150M2S2 | SIGMA 20mm f/1.4 DG HSM Art |
| FH150M2S3 | SIGMA 14mm f/1.8 DG HSM Art |
| FH150M2S4 | SIGMA 12-24mm f/4 DG HSM Art |
| FH150M2S5 | SIGMA 14-24mm f/2.8 DG HSM Art |
Note: FH150M2B only applies to FH150M2S4/FH150M2S5.
User Tips
- When using multiple filters, place the most critical filter (e.g., ND filter) closest to the lens to minimize potential reflections or image degradation.
- Always double-check the security of the filter holder and filters before shooting, especially in windy conditions or when moving the camera.
- For optimal results, keep both your filters and the filter holder clean from dust and fingerprints. The anti-fingerprint design of the filter frames helps, but regular cleaning is still recommended.
Warranty and Support
For any questions regarding product functionality, troubleshooting, or warranty claims, please contact the seller or Benro customer support directly. Keep your purchase receipt as proof of purchase.