LILYGO T-OI Plus

Contents

LILYGO® TTGO T-OI Plus ESP32-C3 RISC-V MCU Wireless Module Development Circuits Board User Manual

Model: T-OI Plus | Brand: LILYGO®

1. Introduction

The LILYGO® TTGO T-OI Plus is a compact and versatile development board featuring the ESP32-C3 RISC-V microcontroller. Designed for Internet of Things (IoT) projects, it integrates Wi-Fi and Bluetooth 5 (BLE) connectivity, offering a secure, low-power, and cost-effective solution for various applications. This manual provides essential information for setting up, operating, and maintaining your T-OI Plus board.

Front and back view of the LILYGO TTGO T-OI Plus ESP32-C3 development board.
Figure 1: LILYGO® TTGO T-OI Plus ESP32-C3 Development Board (Front and Back)

The T-OI Plus builds upon the design of the T-OI ESP8266 version, offering enhanced performance and features. It is compatible with Grove series interface modules and MINI D1 Expansion Shields, providing flexibility for various project needs. The board is available with or without a built-in 16340 battery holder, allowing for both portable and fixed installations.

LILYGO TTGO T-OI Plus with Grove connector highlighted.
Figure 2: T-OI Plus with Grove Connector

2. Specifications

The following table details the technical specifications of the LILYGO® TTGO T-OI Plus development board:

FeatureDescription
ProductT-OI Plus
MCUESP32-C3 (RISC-V 32-bit Microprocessor)
CPU Details400 KB of SRAM, 384 KB of ROM, 8 KB SRAM in RTC
Clock Speed160MHz
FLASH4 MByte
Battery HolderWith/Without 16340 Battery Holder
Grove Connectors4 Pin, 2.0mm
Analog Interfaces2 × 12-bit SAR ADCs, up to 6 channels
Digital Interfaces3 × SPI, 2 × UART, 1 × I2C, 1 × I2S, LED PWM, TWAI, Timers, RMT, Full-speed USB Serial
Wi-FiIEEE 802.11 b/g/n-compliant, Supports Station, SoftAP, SoftAP + Station mode
BluetoothBluetooth 5, Bluetooth mesh
Dimensions (WxHxD)44*20*25.5mm
Weight28g
PackageYes
Detailed specifications table for the LILYGO TTGO T-OI Plus.
Figure 3: Detailed Product Specifications
Dimensions of the LILYGO TTGO T-OI Plus board and the 16340 battery holder.
Figure 4: Product Dimensions

3. Product Overview and Pin Diagram

Understanding the pinout and components is crucial for effective use of the T-OI Plus board. The following diagram illustrates the pin assignments and key features:

LILYGO T-OI Plus V1.3 Pinmap showing GPIOs, power pins, Grove pins, power switch, reset button, controllable LED, and charging indicator.
Figure 5: LILYGO® T-OI Plus V1.3 Pinmap

Key components and their functions:

  • ESP32-C3 Module: The main microcontroller with Wi-Fi and Bluetooth capabilities.
  • GPIO Pins: General Purpose Input/Output pins for connecting sensors, actuators, and other peripherals.
  • Power Pins: 3V3, 5V, and GND for power supply.
  • Grove Pin: Dedicated 4-pin connector for Grove modules (SCL, SDA, 3V3 Power, Ground).
  • Power Switch: Resets the ESP32-C3 microcontroller.
  • Reset Button: Resets the ESP32-C3 microcontroller.
  • Controllable LED: An onboard LED that can be programmed.
  • Charging Indicator: Indicates the charging status of the 16340 battery (if installed).
  • USB-C Port: For power supply and data communication (programming).

4. Setup

The LILYGO® TTGO T-OI Plus can be set up in two main configurations: with a 16340 battery or powered via USB.

4.1. With 16340 Battery Holder

  1. Insert Battery: If your board includes a 16340 battery holder, carefully insert a 3.7V 16340 Li-ion battery into the holder, ensuring correct polarity (+ and - terminals). The battery dimensions are approximately 34mm length and 16mm diameter.
  2. Power On/Off: Use the onboard power switch to turn the device on or off. Push the switch up to turn on (green LED may illuminate), and down to turn off.
  3. Charging: The board supports charging of the 16340 battery via the USB-C port. A charging indicator LED will show the charging status.
LILYGO TTGO T-OI Plus with 16340 battery holder.
Figure 6: T-OI Plus with 16340 Battery Holder
LILYGO TTGO T-OI Plus with 16340 battery installed, showing battery dimensions.
Figure 7: T-OI Plus with 16340 Battery Installed

4.2. Without Battery Holder

  1. Connect to USB Power: If your board does not include a battery holder, connect it to a USB power supply using a USB-C cable. The board can be used directly with a breadboard for prototyping without soldering.
  2. Breadboard Usage: Insert the board into a breadboard, ensuring proper alignment of the pins. Use jumper wires to connect to other components as needed.
LILYGO TTGO T-OI Plus without battery holder.
Figure 8: T-OI Plus Without Battery Holder
T-OI Plus ESP32-C3 without battery holder, showing female pins for breadboard use.
Figure 9: T-OI Plus Without Battery Holder with Female Pins

5. Operating Instructions

The LILYGO® TTGO T-OI Plus is a development board, meaning its operation largely depends on the code uploaded to it. Here are general guidelines and examples:

5.1. Programming the Board

To program the T-OI Plus, you will typically use the Arduino IDE or ESP-IDF framework. Connect the board to your computer via the USB-C port. Ensure you have the correct board definitions and drivers installed.

5.2. Using Wi-Fi and Bluetooth

The ESP32-C3 supports Wi-Fi (802.11 b/g/n) and Bluetooth 5 (BLE). You can develop applications that utilize these features for network connectivity, data transfer, and communication with other Bluetooth devices.

5.3. Interfacing with Peripherals

The board provides various GPIO pins and dedicated interfaces (SPI, UART, I2C, I2S, etc.) for connecting external sensors, displays, and other modules. Refer to the Pinmap (Figure 5) for specific pin functions.

5.4. Example: Using with RGB Light (WS2812)

The video demonstrates connecting an RGB light (WS2812) to the T-OI Plus. This typically involves connecting the data pin of the RGB light to a suitable GPIO pin on the T-OI Plus, and providing power. The board's power switch can then be used to activate the circuit, and a DIP switch on the RGB module (if present) can control its state.

Video 1: LILYGO® T-OI Plus Product Demonstration, including battery installation and RGB light usage.

6. Maintenance

  • Keep Dry: Avoid exposing the board to moisture or liquids.
  • Handle with Care: Electronic components are sensitive. Avoid dropping or applying excessive force to the board.
  • Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
  • Battery Care (if applicable): If using a 16340 battery, ensure it is charged regularly and stored in a cool, dry place when not in use. Do not overcharge or deep discharge the battery.

7. Troubleshooting

  • Board Not Powering On:
    - If using a battery, ensure it is correctly inserted and charged. Check the power switch position.
    - If using USB, ensure the USB-C cable is securely connected to a working power source.
  • Programming Errors:
    - Verify that the correct board (ESP32-C3) and port are selected in your IDE.
    - Ensure all necessary drivers are installed.
    - Check your code for syntax errors or logical issues.
  • Wi-Fi/Bluetooth Connectivity Issues:
    - Double-check your network credentials (SSID, password).
    - Ensure the device is within range of the Wi-Fi access point or Bluetooth device.
    - Verify that your code correctly initializes and uses the Wi-Fi/Bluetooth modules.
  • Peripheral Not Responding:
    - Check wiring connections to ensure they are secure and correct according to the pinout diagram.
    - Verify that the peripheral itself is functional and correctly configured in your code.

8. User Tips

  • Grove Connector Type: The Grove connector on the T-OI Plus is a 4-pin, 2.0mm type, compatible with standard Grove modules.
  • Accelerometer: The T-OI Plus does not have a built-in accelerometer. If your project requires one, an external Grove-compatible accelerometer module can be connected.
  • Deep Sleep Power Consumption: When operating in deep sleep mode with an attached battery, be aware that additional components like the USB/serial converter may still draw a small amount of current. For ultra-low power applications, consider optimizing your circuit design to minimize quiescent current draw from all components.
  • Community Support: For advanced programming questions or project ideas, refer to the official LILYGO GitHub repository and community forums.

9. Warranty and Support

For technical support, documentation, and warranty information, please refer to the official LILYGO® website or their GitHub repository. The manufacturer provides resources for developers and users to ensure successful project implementation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.