LetonPower S1

Contents

LetonPower S1 Diving Flashlight User Manual

Model: S1

1. Introduction

The LetonPower S1 Diving Flashlight is a high-performance underwater lighting solution designed for diving, scuba, and underwater video applications. Developed by LetonPower, a brand dedicated to strong performance and stable quality diving equipment, the S1 features an original all-in-one design for enhanced reliability and powerful illumination.

LetonPower S1 Diving Flashlight showing multiple light modes and features like IPX8 Waterproof and 120 Degree Beam Angle

Figure 1: LetonPower S1 Diving Flashlight with key features highlighted.

2. Package Contents

Please check the package carefully to ensure all items are present:

  • 1 x S1 Diving Flashlight (Built-in 3*4800mAh 21700 power battery)
  • 1 x Round ball handle bracket
  • 1 x Handle
  • 2 x O-rings
  • 1 x USB Charging Cable
  • 1 x L-type screwdriver
Contents of the LetonPower S1 Diving Flashlight package

Figure 2: Included items in the S1 Diving Flashlight package.

3. Specifications

Feature Specification
Brand NameLetonPower
Model NumberS1
Body MaterialOriginal all-in-one Aluminum alloy
Brightness25000LM
Voltage3.7V
Lighting Distance300-500m
Charging ModeType-C charging (can be directly charged with mobile phone charger)
Reachable Water DepthUnder 100 meters
Waterproof RatingIPX8
Beam Angle120 degrees
Dimensions (L x Tail φ x Head φ)13.5cm x 5.6cm x 6cm (5.3in x 2.2in x 2.36in)
Weight (without handle)597g
Light Source (LEDs)4 * XHP50 LED white light (6000K), 4 * XHP50 LED yellow light (3500K), 2 * Red R5 LED (620nm), 2 * Purple R5 LED (395nm)
Built-in Battery3x 4800mAh 21700 power battery (14400mAh total)
Runtime (5000 Lumens)200 minutes
Runtime (14000 Lumens)120 minutes
Runtime (25000 Lumens)60 minutes
CertificationCCC

Note: Test results may vary; refer to actual usage for precise figures.

Diagram showing dimensions of the flashlight and Type-C charging port with battery indicator

Figure 3: Flashlight dimensions and charging port details.

4. Setup

4.1 Unlocking the Power Switch

The flashlight is shipped from the factory with the power switch locked to prevent accidental activation. To unlock:

  1. Press and hold both the left and right switch buttons simultaneously for 3 seconds.
  2. The switch will be successfully unlocked, and the flashlight will light up normally.

To lock the power switch when not in use for a long period, press and hold both switches simultaneously for 3 seconds.

Diagram showing left and right switches and light sources

Figure 4: Left and Right Switch locations and light sources.

4.2 Attaching the Handle/Bracket

Use the provided L-type screwdriver to securely attach the handle and round ball handle bracket to the flashlight. Ensure all screws are tightened to prevent water ingress during underwater use.

Exploded view of the flashlight showing handle and screw attachment points

Figure 5: Components and assembly points for the handle and bracket.

5. Operation

5.1 Switch Control

The S1 Diving Flashlight features two switch buttons for controlling different light modes:

Button 1 (Left Switch): Controls Red, Purple, and Flashing modes.

  • Mode 1: 2 *Red R5 LED Light (620nm wavelength)
  • Mode 2: 2 *Purple R5 LED Light (395nm wavelength)
  • Mode 3: Red flash
  • Mode 4: Double-click the switch for flashing red and blue.

Button 2 (Right Switch): Controls White and Yellow light modes.

  • Mode 1: 4 *XHP50 LED white light (5000 Lumens)
  • Mode 2: 4 *XHP50 LED white light (14000 Lumens)
  • Mode 3: 8 *XHP50 LED LIGHT (25000 Lumens) - Double-click to enter this highlight mode. Color temperature 5000K.
  • Mode 4: 4 *XHP50 LED yellow light (5000 Lumens)
  • Mode 5: 4 *XHP50 LED yellow light (14000 Lumens)

Note on Mode 3: When all 8 LEDs are on, the color temperature reaches 5000K, which mimics natural daylight and is ideal for underwater photography and videography.

5.2 Turning Off the Flashlight

To turn off the flashlight from any mode, long press either switch button for two seconds.

5.3 Switch Indicator Light

  • When the battery level is greater than 30%, the indicator light will be blue.
  • When the battery level is between 5% and 30%, the indicator light will be red.
  • When the battery is low (below 5%), the indicator light will flash for 10 seconds before the flashlight turns off.

5.4 Temperature Control Protection

The S1 features intelligent temperature control. If the flashlight's temperature exceeds 50°C, it will automatically reduce brightness by 30-50% to prevent overheating. Once the temperature drops to 40°C, full brightness will be restored. For optimal performance and to maintain lower operating temperatures, it is recommended to use the flashlight underwater.

5.5 Color Rendering Index (CRI)

The Color Rendering Index (CRI) describes how accurately a light source renders colors compared to natural light. The S1's white and yellow lights are designed to provide high CRI values (up to 95+ for some models), ensuring vibrant and true-to-life colors in your underwater environment.

CRI lamp source set match diagram showing color rendering comparison

Figure 6: Illustration of Color Rendering Index (CRI) and its effect on color perception.

5.6 Video Demonstration of Light Modes

Video 1: Underwater demonstration of the S1's UV, red, and wide-angle white light modes, showcasing its versatility for night diving and capturing vibrant marine life.

6. Charging

The S1 Diving Flashlight supports convenient Type-C charging:

  1. Unscrew the protective screw covering the charging port.
  2. Connect the flashlight to a standard Type-C 5V mobile phone charger using the provided USB charging cable.
  3. During charging, the switch indicator light will show red.
  4. Once the battery is fully charged, the switch indicator light will turn blue.
  5. Important: Before diving, always ensure the charging hole screw is securely tightened to prevent water ingress.

7. Maintenance

  • After each dive, rinse the flashlight thoroughly with fresh water to remove salt and debris.
  • Inspect the O-rings regularly for any signs of wear, cracks, or damage. Replace them if necessary to maintain the waterproof seal.
  • Keep the charging port clean and dry. Always ensure the protective screw is tightened before any water exposure.
  • Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures.
  • If the flashlight will not be used for an extended period, ensure the power switch is locked to prevent accidental discharge.

8. Troubleshooting

If you encounter issues with your LetonPower S1 Diving Flashlight, consider the following:

  • Flashlight not turning on: Ensure the power switch is unlocked (press and hold both switches for 3 seconds). Check battery level and charge if necessary.
  • Reduced brightness: The flashlight has a temperature control protection feature. If the unit becomes too warm (above 50°C), brightness will automatically reduce. Using it underwater will help maintain optimal operating temperature.
  • Water ingress: Always ensure the charging port screw is securely tightened and O-rings are properly seated and undamaged before diving.

For persistent issues not covered here, please refer to the warranty and support information below.

9. User Tips

  • Before each dive, perform a quick check of all seals and ensure the charging port screw is tightly closed to guarantee waterproof integrity.
  • Familiarize yourself with the different light modes and switch functions on land before your dive to easily adjust settings underwater.
  • The 5000K color temperature mode (Mode 3 on Button 2) is excellent for capturing natural colors in underwater photography and videography.

10. Warranty & Support

LetonPower is committed to providing high-quality products and excellent customer service for the S1 Diving Flashlight:

  • 1-Year Replacement Policy: Within 1 year of purchase, if the flashlight is damaged and cannot function normally, LetonPower will replace the product for you free of charge.
  • Post-Warranty Support: If damage occurs after two years, you may receive a new product by paying 50% of the original cost.
  • Free Accessories for Self-Repair: If you prefer to repair the torch yourself, all necessary accessories can be provided for free.

For further assistance or to claim warranty service, please contact LetonPower customer support via email: letonpower@Foxmail.com.

You can also refer to the detailed user manual in PDF format for additional information: View User Manual (PDF)

© 2023 LetonPower. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.