EPSON A411E

Contents

EPSON A411E 24V 1.3A Power Adapter User Manual

Model: A411E

1. Introduction

This manual provides essential information for the safe and proper use of your EPSON A411E 24V 1.3A Power Adapter. Please read this manual thoroughly before using the product and keep it for future reference. This power adapter is designed to provide reliable power to compatible EPSON devices.

EPSON A411E Power Adapter
Figure 1: Front view of the A411E power adapter.

2. Safety Information

Always observe the following safety precautions to prevent electric shock, fire, or damage to the product or connected devices.

  • CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.
  • DRY LOCATION USE ONLY.
  • Ensure the power adapter is used in a well-ventilated area.
  • Do not expose the adapter to water, moisture, or high humidity.
  • Do not attempt to disassemble or repair the adapter. Refer servicing to qualified personnel.
  • Keep out of reach of children.
A411E Power Adapter safety warnings and certifications
Figure 2: Adapter label showing safety warnings and international certifications.

3. Setup Instructions

Follow these steps to properly set up your EPSON A411E Power Adapter:

  1. Identify the Correct Plug Type: The adapter may come with different AC cable plug types (US, EU, UK, AU) or without an AC cable. Ensure you have the correct AC cable for your region, if applicable.
  2. Connect to Device: Insert the DC output connector of the A411E adapter firmly into the power input port of your compatible EPSON device (e.g., EPSON 2480, 2580, 3590, V500, V600, V700, V750, GT-1500, GT-2500).
  3. Connect to Power Outlet: Plug the AC input cable (if included) into the adapter, then plug the AC power cord into a standard wall outlet. If your adapter was purchased 'Without AC Cable', ensure you use a compatible AC cable.
  4. Verify Connection: Ensure all connections are secure before powering on your device.
A411E Power Adapter with cable
Figure 3: Side view of the A411E power adapter with its attached DC output cable.

4. Operating Instructions

Once the adapter is correctly connected to your EPSON device and a power outlet, the device should receive power. The adapter operates automatically to provide the necessary voltage and current.

  • Ensure the power adapter is easily accessible for disconnection if needed.
  • Do not overload the power outlet.
  • If the adapter feels excessively hot, disconnect it immediately and check for issues.

5. Maintenance

To ensure the longevity and proper functioning of your power adapter:

  • Keep the adapter clean and free from dust. Use a dry, soft cloth for cleaning.
  • Avoid bending or crimping the cables excessively.
  • Store the adapter in a cool, dry place when not in use.
  • Regularly inspect the adapter and cables for any signs of damage, such as frayed wires or cracks in the casing. Discontinue use if damage is found.

6. Troubleshooting

If you encounter issues with your power adapter, try the following:

  • Device not powering on:
    • Check if the adapter is securely plugged into both the device and the wall outlet.
    • Ensure the wall outlet is functional by testing it with another device.
    • Verify that the adapter's specifications match your device's power requirements.
  • Adapter is hot:
    • It is normal for power adapters to get warm during operation. However, if it is excessively hot to the touch, disconnect it immediately. Ensure it is not covered or in an enclosed space.
  • Visible damage:
    • If the adapter or cables show any signs of physical damage, discontinue use and replace the adapter.

7. Specifications

EPSON A411E Power Adapter Specifications
FeatureDetail
ModelA411E
Input220-240V~, 50-60Hz, 0.5A, 40W
Output24V, 1.3A
CertificationCE, Dot, EAC (also VCCI, N86, CCC, V, PSE)
OriginMainland China
Compatible EPSON Models2480, 2580, 3590, V500, V600, V700, V750, GT-1500, GT-2500
Package Dimensions (approx.)Length: 30 cm, Width: 20 cm, Height: 10 cm
Package Weight (approx.)0.4 kg
A411E Power Adapter label with input/output specifications
Figure 4: Close-up of the adapter's label detailing electrical specifications.

8. User Tips

  • Always use the correct plug type for your region to avoid compatibility issues.
  • If your device requires a specific power rating, double-check that the A411E adapter's output (24V 1.3A) matches or exceeds the requirement.
  • Consider purchasing an adapter with an AC cable if you do not already have a compatible one.

9. Warranty and Support

For any issues or questions regarding your EPSON A411E Power Adapter, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.