TOPPING DX3 Pro+

Contents

Topping DX3 Pro+ Hi-Res DAC & Headphone Amplifier User Manual

Model: DX3 Pro+

Introduction

The Topping DX3 Pro+ is a high-performance Digital-to-Analog Converter (DAC) and Headphone Amplifier designed to deliver pristine audio quality. Featuring an ES9038Q2M DAC chip, XMOS XU208 USB interface, and an optimized NFCA circuit, it supports high-resolution audio formats including DSD512 and PCM768kHz. With multiple input options and versatile output modes, the DX3 Pro+ is suitable for various audio setups, from desktop listening to integration with media players and mobile devices.

Package Contents

Please check the package carefully for the following items:

Contents list for Topping DX3 Pro+ showing the device, power adapter, remote, USB cable, Bluetooth antenna, user manual, and warranty card.
Figure 1: Package Contents
  1. DX3 Pro+ Unit
  2. DC 15V/1A Power Adapter
  3. Remote Control
  4. USB Cable
  5. Bluetooth Antenna
  6. User Manual (this document)
  7. Warranty Card

Product Overview

Front and Rear Panels

Front and rear panel view of the black Topping DX3 Pro+ showing inputs and outputs.
Figure 2: Front and Rear Panel Layout

The front panel features the headphone output, display screen, and a multi-function knob for volume control and menu navigation. The rear panel provides a comprehensive set of input and output options:

  • RCA Outputs (Rout, Lout): For connecting to external amplifiers or active speakers.
  • Coaxial Inputs (COAX 1, COAX 2): Digital audio inputs.
  • Optical Input (OPTICAL): Digital audio input.
  • USB Input (USB): For connecting to a computer or compatible mobile device.
  • Bluetooth Antenna Port (ANT): For connecting the included Bluetooth antenna.
  • DC 15V Power Input: For connecting the power adapter.

System Framework

Block diagram of the DX3 Pro+ system framework, showing signal paths from inputs (BT, COAX, OPT, USB) through digital processing, ES9038Q2M DAC, I/V conversion, to RCA and NFCA headphone outputs.
Figure 3: System Framework Diagram

The DX3 Pro+ integrates various components for optimal audio processing. Digital inputs (Bluetooth, Coaxial, Optical, USB) are routed through digital processing, then to the ES9038Q2M DAC. The signal then undergoes I/V conversion and is split to the balanced-to-single-ended conversion for RCA outputs, and to the NFCA circuit for the single-ended headphone output.

Setup

1. Power Connection

  1. Connect the DC 15V/1A power adapter to the DC 15V input port on the rear panel of the DX3 Pro+.
  2. Plug the power adapter into a suitable power outlet.

2. Audio Input Connections

Choose one of the following input methods:

  • USB Input: Connect the provided USB cable from your computer (Windows, Mac, Linux) or compatible mobile device (iOS, Android with OTG support) to the USB input port on the DX3 Pro+.
    Diagram showing a mobile phone connected to the DX3 Pro+ via USB for high performance DAC application.
    Figure 4: USB Connection for Mobile Devices
  • Optical/Coaxial Input: Connect your digital audio source (e.g., CD player, TV) to the OPTICAL, COAX 1, or COAX 2 input ports using appropriate cables.
  • Bluetooth Input:
    1. Screw the Bluetooth antenna onto the ANT port on the rear panel.
    2. On the DX3 Pro+, select Bluetooth as the input source.
    3. Enable Bluetooth on your phone, tablet, or notebook and search for "Topping DX3 Pro+".
    4. Pair with the device. The DX3 Pro+ supports LDAC, AAC, SBC, aptX, aptX LL, and aptX HD protocols for high-quality wireless audio.
      Image showing a smartphone connected via Bluetooth to the DX3 Pro+.
      Figure 5: Bluetooth Connection

3. Audio Output Connections

  • Headphones: Plug your headphones into the 3.5mm headphone jack on the front panel.
  • RCA Output: Connect the RCA outputs (Rout, Lout) to your power amplifier or active speakers.

4. Driver Installation (for Windows PC)

For Windows operating systems, it is recommended to install the customized Thesycon ASIO driver for optimal performance. For Mac and Linux, the device is typically plug-and-play and does not require additional drivers.

Screenshot of Windows sound settings and Mac audio MIDI setup, demonstrating PC as a HIFI source with DX3 Pro+.
Figure 6: PC as a Hi-Fi Source Setup

Operating Modes

The DX3 Pro+ offers four distinct output modes to suit various audio needs. You can switch between these modes using the multi-function knob or remote control.

Image showing the DX3 Pro+ in DAC application mode, displaying 'DAC' and a sampling rate.
Figure 7: DAC Application Mode
Image showing the DX3 Pro+ in DAC+Headphone amp application mode, displaying a volume level.
Figure 8: DAC+Headphone Amp Application Mode
Output ChannelIndicator3.5mm Headphone OutputRCA OutputAdjustable Volume
Headphone ampHeadphone indicator is on✓✗✓
Headphone amp + Line outHeadphone indicator is on, DAC indicator is on✓✓✓
DACDAC indicator is on, sampling rate is displaying on screen✗✓✗
Pre-amplifierDAC indicator is on, volume is displaying on screen✗✓✓

Gain Settings

The DX3 Pro+ provides two gain settings for the headphone amplifier, allowing adaptation to various headphone sensitivities:

Image showing two gain settings: +6dB Lo Gain and +19dB Hi Gain.
Figure 9: Headphone Gain Settings
  • Lo Gain: +6dB
  • Hi Gain: +19dB

Adjust the gain setting via the device menu to match your headphones and listening preferences.

NFCA Circuit

The DX3 Pro+ incorporates an optimized NFCA (Nested Feedback Composite Amplifier) circuit. This design contributes to ultra-low noise and distortion, ensuring a clean and powerful output for headphones. It is capable of driving a wide range of headphones, from sensitive In-Ear Monitors (IEMs) to power-hungry high-impedance headphones.

  • 32Ω Load: 1800mW x 2
  • 300Ω Load: 250mW x 2

Specifications

The Topping DX3 Pro+ boasts impressive technical specifications:

Table of specifications for DX3 Pro+ including decoding parameters and headphone amplifier specifications.
Figure 10: Detailed Specifications

General

  • Dimensions (W x H x D): 16.5cm x 4cm x 12cm
  • Material: Metal
  • Origin: Mainland China
  • Certification: CE

Decoding Parameters (USB In@96kHz)

  • THD+N@1kHz (A-wt): 0.00015%
  • THD@20-20kHz (90kBw): <0.00020%
  • SNR@1kHz (A-wt): 122dB
  • Dynamic Range@1kHz (A-wt): 122dB
  • Frequency Response: 20Hz-20kHz (±0.3dB), 20Hz-40kHz (±0.7dB)
  • Output Level: 2.1Vrms@0dBFS
  • Noise (A-wt): <1.8uVrms
  • Channel Crosstalk@1kHz: -137dB
  • Channel Balance: 0.3dB
  • Output Impedance: 20Ω

Headphone Amplifier Specifications

  • THD+N@1kHz (A-wt): <0.00015% @Output=1500mW (32Ω), <0.00013% @Output=1600mW (300Ω)
  • THD@20-20kHz (90kBw): <0.0005% @Output=1600mW (300Ω)
  • SNR@MAX OUT 1kHz (A-wt): 120dB
  • Dynamic Range@1kHz (A-wt): 120dB
  • Frequency Response: 20Hz-20kHz (±0.3dB), 20Hz-40kHz (±0.7dB)
  • Output Level: 5.5Vpp@G=L, 21.5Vpp@G=H
  • Noise (A-wt): <2.1uVrms@G=L, <7.0uVrms@G=H
  • Channel Crosstalk@1kHz: -90dB
  • Gain: 6.0dB (Vrms/FS) @G=L, 19dB (Vrms/FS) @G=H
  • Output Impedance: <0.1Ω
  • Output Power: 1800mW x 2 @32Ω THD+N<0.1%, 900mW x 2 @64Ω THD+N<0.1%, 250mW x 2 @300Ω THD+N<0.1%
  • Adapter Impedance: >8Ω

Supported Formats

InputPCMDSD (Native)DSD (DoP)
USB IN44.1kHz-768kHz / 16-bit-32bitDSD64-DSD512DSD64-DSD256
COAX / OPT IN44.1kHz-192kHz / 16-bit-24bitNot supportedDSD64
BT INAAC/SBC/APTX/APTX LL/APTX HD/LDACNot supportedNot supported

Maintenance

  • Keep the device clean by wiping it with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the unit yourself, as this will void the warranty and may cause damage.

Troubleshooting

  • No Sound:
    • Check all cable connections (power, input, output).
    • Ensure the correct input source is selected on the DX3 Pro+.
    • Verify that the volume is not muted or set too low.
    • If using USB, ensure drivers are correctly installed (for Windows) and the DX3 Pro+ is selected as the output device in your computer's sound settings.
  • Distorted Sound:
    • Check for loose connections.
    • Ensure the audio source is not overdriving the input.
    • Try a different audio cable or source.
    • If using Bluetooth, ensure you are within range and there is no interference.
  • Bluetooth Connection Issues:
    • Ensure the Bluetooth antenna is securely attached.
    • Restart both the DX3 Pro+ and your Bluetooth device.
    • Delete the DX3 Pro+ from your device's Bluetooth list and re-pair.

User Tips

  • Filter Selection: Experiment with different digital filters (e.g., F-7 mentioned in reviews) to find the sound signature that best suits your preferences. Some users find certain filters provide a more natural sound.
  • Operating System Compatibility: For Linux and Ubuntu users, the DX3 Pro+ is often recognized immediately without additional driver installation, offering a seamless plug-and-play experience.
  • Audio Quality Enhancement: The Topping DX3 Pro+ features a high-resolution DAC and headphone amp, which improves the audio quality of your headphones by reducing noise and distortion.

Warranty and Support

For detailed warranty information, technical support, and service inquiries, please refer to the official user manual PDF provided by Topping or contact your retailer. Do not attempt to open or modify the device, as this will void the warranty.

A comprehensive user manual in PDF format is available for download:

Topping DX3 Pro+ User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.