1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Robotime Rokr Cruiser Motorcycle LK504 DIY Wooden Model Kit. Designed for enthusiasts aged 14 and above, this kit offers a rewarding building experience, culminating in a functional mechanical model. Younger builders may require parental supervision.

2. Package Contents
Before beginning assembly, please verify that all components are present in your kit:
- Laser-cut wooden sheets (420 pieces)
- Assembly instruction manual
- Accessory bags (containing screws, springs, rubber bands, sandpaper, wax, etc.)

3. Specifications
| Feature | Detail |
|---|---|
| Model Number | LK504 |
| Material | Wood |
| Quantity of Items in Set | 420 PCS |
| Assembly Time | Approximately 5 hours |
| Assembled Dimensions (L x W x H) | 160mm x 116mm x 270mm |
| Product Weight | 630g |
| Recommended Age | 14+ years |
| Certifications | CE, EN71, FSC, FCC |
| Warning | Small Parts Not For Children Under 3 Years Old |

4. Setup and Assembly
The ROKR Cruiser Motorcycle kit features laser precision cutting and is designed for buckle assembly, meaning no glue is required. Each part is coded to simplify the process. Follow the graphic instructions provided in your manual step-by-step.
4.1 Preparation
- Unpack all components and lay them out on a clean, flat surface.
- Familiarize yourself with the instruction manual and identify the different wooden sheets and accessory bags.
- Ensure you have adequate lighting and a comfortable workspace.

4.2 Assembly Steps
- Carefully pop out each wooden piece from its sheet. Use sandpaper (included) to smooth any rough edges if necessary.
- Follow the numbered steps and diagrams in the instruction manual. Each part has a corresponding code to guide you.
- Assemble the main frame, engine, wheels, and other detailed components using the buckle system.
- Integrate the mechanical gears and spring mechanism as instructed.
- Attach the independent front suspension and ensure it moves freely.
- Assemble the steering mechanism, allowing for 30-degree inclination.
- Construct and attach the side openable storage boxes.
- Once all wooden pieces are assembled, apply wax (if available, see User Tips) to moving parts for smoother operation.


Video: Assembly and Features Demonstration
5. Operating Instructions
Your ROKR Cruiser Motorcycle is a mechanical model operated by a spring drive. To make the motorcycle move:
- Locate the brace start system on the side of the motorcycle.
- Gently twist the spring mechanism to wind it.
- Once wound, release the motorcycle on a flat surface. It can run up to 7-10 feet, and you will observe the engine pistons moving during operation.
6. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe dust from the model. Avoid using water or cleaning solutions, as they may damage the wood.
- Lubrication: For smoother operation of gears and moving parts, periodically apply a small amount of wax (such as candle wax) to the contact points.
- Storage: Store the model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or damage to the wood.
- Handling: Handle the model with care, especially delicate parts, to avoid breakage.
7. Troubleshooting
- Model does not move after winding:
- Ensure the spring mechanism is fully wound.
- Check for any jammed gears or parts that might be preventing movement. Gently rotate wheels or gears to identify obstructions.
- Verify that all connections are secure and no parts are loose.
- Apply wax to moving parts to reduce friction.
- Parts are difficult to fit during assembly:
- Do not force parts. Use the included sandpaper to gently smooth edges if a fit is too tight.
- Refer to the manual to ensure you are using the correct pieces and orientation.
8. User Tips
- Parental Guidance: For builders under 14 years old, parental accompaniment is recommended to assist with assembly and ensure a safe and enjoyable experience.
- Wax Application: Wax is crucial for the smooth operation of the mechanical gears. If the kit did not include wax (common for international shipments due to customs restrictions), a standard candle can be used as a suitable replacement. Apply sparingly to moving wooden parts.
- Patience is Key: This is a detailed model. Take your time with each step, and enjoy the process of bringing your motorcycle to life.
9. Warranty and Support
For any questions regarding assembly, missing parts, or product defects, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.