XIAOMI Redmi Stylus Pen

Contents

Xiaomi Redmi Stylus Pen User Manual

Model: Redmi Stylus Pen

Compatible exclusively with Redmi Pad Pro / Redmi Pad Pro 5G

1. Product Overview

The Redmi Stylus Smart Pen is an active stylus designed to provide a smooth and responsive writing experience on compatible Redmi tablets. It features ultra-low latency, sensitive ink output, and a comfortable pressure sensation.

Redmi Stylus Smart Pen, main product image, compatible only with Redmi Pad Pro 12.1.
Redmi Stylus Smart Pen (Only for Redmi Pad Pro 12.1)

Package Contents:

  • Redmi Stylus Pen × 1
  • Pen Tip × 1
  • Quick Start Guide × 1

2. Setup and Initial Use

2.1 Compatibility

Important: The Redmi Stylus Pen is exclusively compatible with Redmi Pad Pro / Redmi Pad Pro 5G.

Using the stylus with non-compatible devices may result in no functionality or damage.

2.2 Charging the Stylus

The stylus features an 80mAh battery and charges via a Type-C interface. It requires an external charger (not included in the package).

  • Connect the stylus to a Type-C charger.
  • If the stylus has been stored for a long time and its power has depleted, it may enter a battery-protected state. In this case, charge the stylus for 5-15 minutes before attempting to use it.

2.3 Pairing with Your Tablet

The Redmi Stylus Pen pairs with your Redmi Pad Pro via Bluetooth.

  • Ensure your Redmi Pad Pro's Bluetooth is enabled.
  • Place the stylus near your tablet. The pairing process should initiate automatically.
  • A non-Xiaomi official case or keyboard may interfere with the stylus pairing or cause abnormal charging. If you experience issues, remove any non-original protective cases from your tablet.

3. Operating the Stylus

3.1 Basic Drawing and Writing

The Redmi Stylus Pen offers a smooth writing experience comparable to a real pen. It features 4096 levels of pressure sensitivity, allowing for comfortable and natural strokes, whether light or heavy. The lines appear clear and thick, mimicking writing on paper.

Close-up of the stylus in use, illustrating comfortable 4096-level pressure sensation, akin to writing on paper.
Experience 4096-level pressure sensitivity for natural writing.

3.2 Ultra-Low Latency

The stylus boasts a 5ms ultra-low delay and sensitive ink output with 10g pressure. This ensures a precise response to force changes, accurate starting, stable lifting, and a fluid writing experience.

Image showing the stylus writing on a tablet screen, emphasizing ultra-low latency.
Write with ultra-low latency for a seamless experience.

3.3 Multifunctional Shortcut Buttons

The stylus is equipped with primary and secondary keys for quick access to various functions:

Diagram detailing the multifunctional shortcut buttons: Key shorthand, Secondary key screenshot, and Quick key flipping, with examples of their use.
Multifunctional shortcut buttons for enhanced productivity.
  • Key Shorthand (Main Button): Long press the main button and lightly touch the screen to start Xiaomi Creation. Within the canvas, a single press of the main button can switch brushes.
  • Secondary Key Screenshot: Long press the secondary key and lightly touch the screen to quickly take a screenshot. Within the canvas, a single press of the secondary key can switch colors.
  • Quick Key Flipping: When reading WPS documents, literature, or browsing videos, a single press of either the primary or secondary key can be used to achieve page up and down functionality.

4. Maintenance

4.1 Cleaning the Stylus Tip

To ensure optimal performance and prevent damage to your tablet screen, keep the stylus tip clean. Dust and other particles can cause premature wear of the tip or scratch the screen.

4.2 Replacing the Pen Tip

The tip of the Redmi Stylus Pen will gradually wear out with use. It needs to be replaced to maintain writing quality and prevent damage to the tablet screen.

Replacement Procedure:

  1. Hold the tip of the pen with your finger.
  2. Gently swirl the tip out of the pen tube in the direction shown in the diagram (refer to the full user manual PDF for visual guidance).
  3. Hold the head of the new pen tip and insert the end of the tip vertically into the pen tube.
  4. Gently swirl the tip in the opposite direction until it is securely seated.
  5. Ensure the installed tip is secure and does not fall loose.

5. Troubleshooting

  • Stylus not responding after long storage: If the stylus has been unused for an extended period, its battery might be fully depleted. Charge it for 5-15 minutes using a Type-C charger before attempting to use it.
  • Pairing or charging issues: Non-original Xiaomi protective cases or keyboards can interfere with the stylus's pairing and charging functions. If you encounter problems, remove any third-party accessories from your Redmi Pad Pro.
  • Inaccurate or inconsistent writing: Ensure the pen tip is clean and free from dust or debris. If the tip is worn, replace it with a new one.
  • Stylus not compatible with my device: The Redmi Stylus Pen is designed exclusively for Redmi Pad Pro / Redmi Pad Pro 5G. It is not compatible with other tablets, including Mi Pad 5, Mi Pad 6, Redmi Pad SE, or iPad models.

6. Specifications

FeatureSpecification
BrandXIAOMI
Model NumberRedmi Stylus Pen
Model NameRedmi Smart Pen
CompatibilityRedmi Pad Pro / Redmi Pad Pro 5G only
Pen Length157mm
Weight12.7g
Pressure Sensitivity4096-level
Battery Capacity80mAh
Charging InterfaceType-C
Continuous Writing TimeUp to 12 hours
Ultra-Low Latency5ms
Ink Output Sensitivity10g pressure
Touch Pen Reporting Rate240Hz
Screen Main Frame Rate (during writing)120Hz
Wireless CommunicationYes (Non-Remote Function)
State of AssemblyReady-to-Go
Control Channels2 CHANNELS
OriginMainland China

7. User Tips

  • Ensure Compatibility: Always confirm your tablet is a Redmi Pad Pro / Redmi Pad Pro 5G to ensure proper functionality. This stylus is not universal.
  • Remove Non-Original Cases: If you experience issues with pairing or charging, remove any third-party protective cases from your tablet. These can interfere with the stylus's magnetic attachment and wireless functions.
  • Keep Tip Clean: Regularly clean the stylus tip to prevent dust and debris from accumulating, which can affect writing precision and potentially scratch your tablet screen.
  • Charge Before First Use: If the stylus is new or has been stored for a long time, charge it for 5-15 minutes to activate it from a battery-protected state.

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official Xiaomi website or contact their customer service. You can also find a comprehensive user manual in PDF format for further reference:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.