Introduction
Thank you for choosing the DEKO 1200ml HVLP Spray Gun. This high-power electric paint sprayer is designed for efficient and easy painting tasks, featuring a unique LED light system, multiple nozzle options, and a large capacity container. Please read this manual carefully before operation to ensure safe and effective use of the product.
Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. Keep the work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool. Wear appropriate personal protective equipment, including eye protection, respiratory protection, and gloves. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged. The package typically includes:
AC Set (DKSG60K1)
- 1 x DKSG60K1 Spray Gun
- 1 x Cleaning Needle
- 3 x Spray Nozzles & Jets (1.0mm, 1.8mm, 2.5mm)
- 1 x Mask
- 1 x Viscosity Cup
- 2 x Rubber Gloves
- 1 x Shoulder Strap
- 1 x Spanner
- 5 x Paint Strainers
DC Set (DKSG20K3Y)
- 1 x DKSG20K3Y Spray Gun
- 1 x BT20XL01 1.5 Battery
- 1 x Charger
- 1 x Belt Clip
- 1 x Cleaning Needle
- 3 x Spray Nozzles & Jets (1.0mm, 1.8mm, 2.5mm)
- 1 x Mask
- 1 x Viscosity Cup
- 2 x Rubber Gloves
- 1 x Shoulder Strap
- 1 x Spanner
- 5 x Paint Strainers

Figure 1: DEKO HVLP Spray Gun and included accessories.
Features
- Innovative FRONT Air Inlet and Ventilation System
- Unique LED Light System for better visibility in enclosed spaces
- Accessory Box: Conveniently stores nozzles/jets and a spanner
- Trigger Design with Enclosed Hole: Offers improved control
- A handle & a Strap for Portability
- Detachable gun for easy cleaning
- 3 Nozzle sizes (1.0mm, 1.8mm, 2.5mm) for various paint types
- 3 Spray Patterns: Horizontal, Vertical, Circular
- 1200ml Large Capacity Container

Figure 2: Overview of key features.
Setup
- Assembly:
The spray gun features a detachable design for easy cleaning. To detach, locate the release button and separate the gun from the motor unit. Ensure it is securely reattached before use.

Figure 3: Detachable gun components and controls.
- Nozzle Selection:
Select the appropriate nozzle size for your paint and application:
- 1.0mm - 1.8mm: Ideal for thin paints like sealers and varnish.
- 2.5mm: Suitable for latex paint and chalk-type paint.
To change nozzles, unscrew the union nut, replace the nozzle and air cap, then re-tighten the union nut.
- Paint Preparation:
Before filling the container, ensure your paint is properly thinned according to the paint manufacturer's instructions. Use the provided viscosity cup to test the paint's consistency. Pour the paint through a paint strainer (5 included) to remove any impurities that could clog the nozzle.
Video 1: Demonstration of paint preparation using the viscosity cup and filling the container.
- Filling the Container:
Unscrew the paint container from the gun. Carefully pour the prepared paint into the 1200ml container. Reattach the container securely to the gun.
- Attaching the Portable Strap (Optional):
For extended use or portability, attach the shoulder strap to the designated points on the spray gun handle.

Figure 4: Attaching the portable strap.
Operating Instructions
- Power Connection:
For AC models (DKSG60K1), plug the power cord into a suitable electrical outlet. For DC models (DKSG20K3Y), ensure the battery is fully charged and securely inserted into the tool.
- Adjusting Flow Control:
The flow control knob (jog wheel) allows you to adjust the paint output. Turn it clockwise for more paint and counter-clockwise for less. Test on a scrap piece of material to find the optimal setting.
- Adjusting Spray Patterns:
The spray gun offers three patterns: Horizontal, Vertical, and Circular. Rotate the air cap to switch between patterns. The diagram on the air cap indicates the current pattern.
- Horizontal: For vertical surfaces.
- Vertical: For horizontal surfaces.
- Circular: For small areas or corners.

Figure 5: Adjusting and demonstrating spray patterns.
- Using the LED Light System:
The unique LED light system provides better visibility, especially in dimly lit or enclosed spaces. Locate the LED light switch on the top of the gun to turn it on/off. The light angle can be adjusted.

Figure 6: The unique LED light system in operation.
- Spraying Technique:
Hold the spray gun approximately 6-12 inches (15-30 cm) from the surface. Move the gun in smooth, even strokes, overlapping each pass by about 50%. Avoid tilting the gun excessively to prevent uneven coverage or drips. Release the trigger at the end of each stroke.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your spray gun.
- Cleaning After Each Use:
Immediately after use, empty any remaining paint from the container. Fill the container with an appropriate cleaning solution (water for water-based paints, solvent for oil-based paints). Spray the cleaning solution through the gun until it runs clear. This helps prevent paint from drying inside the nozzle and gun components.
- Thorough Cleaning:
Disassemble the gun by pressing the release button. Clean all detachable parts, including the nozzle, air cap, and container, using the cleaning needle and appropriate cleaning solution. Ensure all paint residue is removed. Allow all parts to dry completely before reassembly.
- Nozzle Storage:
The spray gun features an accessory box for convenient storage of nozzles and the spanner. Always store nozzles in this designated area to prevent loss or damage.
Troubleshooting
- Uneven Spray/Splattering:
- Check paint consistency; it might be too thick. Thin the paint as per manufacturer's instructions.
- Ensure the nozzle is clean and free from clogs.
- Verify the air cap is correctly positioned and tightened.
- No Paint Flow:
- Check if the paint container is empty.
- Ensure the suction tube is properly submerged in paint.
- Clean the nozzle and air cap for any blockages.
- Verify the flow control knob is not set to minimum.
- Motor Not Starting (DC Model):
- Check if the battery is fully charged.
- Ensure the battery is securely inserted.
- Motor Not Starting (AC Model):
- Check if the power cord is securely plugged into a working outlet.
- Check for tripped circuit breakers.
Specifications
| Specification | DKSG60K1 (AC Model) | DKSG20K3Y (DC Model) |
|---|---|---|
| Model | DKSG60K1 | DKSG20K3Y |
| Chuck Type | HVLP | HVLP |
| Voltage | 220-240V~50Hz / 110-120V~60Hz | 20V |
| Container Volume | 1200ml | 1200ml |
| Rated Speed (No-Load Speed) | 32000 RPM | 32000 RPM |
| Nozzle Size | 1.0mm / 1.8mm / 2.5mm | 1.0mm / 1.8mm / 2.5mm |
| LED Voltage | DC16-20V | N/A (Integrated with 20V system) |
| LED Color Temperature | 7200-8000K | 7000-7500K |
| LED Power Consumption | 4W | 4W |
| LED Electric Current | 200mA | 200mA |
| LED Lumen | 230-250LM | 180-220LM |
| Battery (DC Model Only) | N/A | 1.5A (BT20XL01) |
| Power Type | Electric | Electric (Cordless) |
| Usage | Home DIY | Home DIY |
| Certification | CE | CE |
| Origin | Mainland China | Mainland China |
User Tips
- Paint Compatibility: The spray gun is suitable for water-based polyurethane and can be used with solvent-based paints. Always check paint manufacturer recommendations for thinning and compatibility with HVLP sprayers.
- Battery Compatibility: The DC model (DKSG20K3Y) uses a 20V battery. Some users have noted that Makita-type 18V batteries might be compatible with an adapter. However, always use DEKO official batteries and chargers for optimal performance and safety.
- First-Time Use: If it's your first time using a paint sprayer, practice on scrap material to get a feel for the flow control and spray patterns. This helps avoid drips and ensures even coverage.
- Voltage Selection: For AC models, ensure you select the correct voltage (110V or 220V) for your region when purchasing.
Warranty and Support
The DEKO HVLP Spray Gun comes with a 2-year limited warranty. For any issues or support, please contact DEKO customer service or refer to the official DEKO website for further assistance.