Introduction
The Rapoo MT710L is an ergonomic multi-mode wireless mouse designed for enhanced productivity across multiple devices. It offers Bluetooth 5.0, 2.4GHz wireless, and wired connectivity options, supporting up to 6 devices. Key features include M+ Cross-Computer functionality, 10 programmable buttons with on-board memory, adjustable DPI up to 4000, and convenient USB-C charging.
Package Contents
- 1 x Rapoo MT710L Wireless Mouse
- 2 x USB-A Receivers (one stored on the bottom of the mouse, one extra in accessory box)
- 1 x USB-C to USB-A Charging Cable
- 1 x User Manual
Specifications
| Feature | Specification |
|---|---|
| Model | MT710L (also known as MT750PLUS) |
| Sensor | PAW 3220 Optical |
| DPI | 800/1000/1200/1600/2400/3200/4000 (adjustable in 50 intervals) |
| IPS (Movement Speed) | 30 |
| Acceleration | 10G |
| Polling Rate | 125/250/500/1000Hz (2.4G & Wired); 125Hz (Bluetooth) |
| Number of Buttons | 7 (10 programmable) |
| Connectivity | Bluetooth 5.0, 2.4GHz USB, Wired |
| Wireless Operating Distance | 10m / 33ft |
| Hand Orientation | Right |
| Power Source | 800mAh Lithium-Polymer Battery |
| Battery Life | Up to 90 days (usage dependent) |
| Charging Port | USB-C |
| Charging Time | Approx. 3 hours |
| Operating System Compatibility | Windows, Mac OS, Linux, Chrome OS, Android |
| Dimensions (L x W x H) | 12.2cm x 8.5cm x 4.9cm (4.8in x 3.35in x 1.93in) |
| Weight | 124g (4.37oz) |
Setup Instructions
The Rapoo MT710L mouse offers three connection modes: 2.4GHz wireless, Bluetooth, and wired.
1. 2.4GHz Wireless Connection
- Locate one of the USB-A receivers. One is stored in the compartment on the bottom of the mouse.
- Plug the USB-A receiver into an available USB port on your computer.
- Turn on the mouse using the switch on the bottom.
- The mouse should automatically connect. If not, ensure the mode switch on the bottom is set to '2.4G Mode' (Up position).
2. Bluetooth Connection
The mouse supports up to 3 Bluetooth devices.
- Turn on the mouse.
- Switch the mode selector on the bottom of the mouse to 'Bluetooth Mode' (Down position).
- Press the Bluetooth Channel indicator button (1, 2, or 3) on the side of the mouse to select a channel. The corresponding LED will light up.
- Press and hold the selected Bluetooth Channel button for 3 seconds until the LED flashes rapidly, indicating pairing mode.
- On your device (PC, laptop, tablet, smartphone), go to Bluetooth settings and search for new devices.
- Select "Rapoo MT710L" (or similar name) from the list to pair.
- Repeat for up to two more Bluetooth devices using channels 2 and 3.
3. Wired Connection
- Connect the USB-C end of the charging cable to the mouse.
- Connect the USB-A end of the charging cable to an available USB port on your computer.
- The mouse will function as a wired mouse and charge simultaneously.
Operating Instructions
Switching Between Devices
The MT710L can connect to up to 6 devices (3 via Bluetooth, 2 via 2.4GHz USB receiver, 1 via wired connection). Use the device switching button on the side of the mouse to cycle through connected devices. The connection indicator LEDs (1, 2, 3) will show the currently active Bluetooth channel, while a separate indicator shows 2.4G mode.
DPI Adjustment
The mouse features 7 adjustable DPI levels: 800, 1000, 1200, 1600, 2400, 3200, and 4000. Use the DPI switching button on the top of the mouse to cycle through these settings. You can also fine-tune DPI values in 50-interval steps via the mouse driver software.
Programmable Buttons and On-Board Memory
The MT710L has 10 programmable buttons. To customize these buttons and save multiple profiles, you need to install the Rapoo mouse driver software. The on-board memory ensures your settings are retained even when switching devices or after rebooting.
- Step 1: Download Driver: Visit www.rapoo.com and search for "MT750PLUS" to download the driver. (Note: MT710L and MT750PLUS use the same driver).
- Step 2: Rename Config Profile: Open the driver software. Rename your configuration profile or add multiple profiles according to your needs.
- Step 3: Adjust DPIs: Within the software, adjust DPIs according to monitor specifications and tasks, or disable unused DPIs.
- Step 4: Assign Shortcuts: Select a button in the software, then assign a shortcut or function key. To cancel, click [Restore default].
M+ Cross-Computer Feature
The M+ feature allows you to seamlessly move your cursor, copy, and paste files between different computers. This requires the mouse driver to be installed on all participating computers, and all computers must be connected to the same Wi-Fi or Ethernet network.
- Step 5: Pair Mouse for Cross-Screen: Pair the mouse to another computer via USB dongle.
- Open the driver software and turn on LAN mode to enable Cross-Screen & Clipboard functionality.
Charging and Battery
The MT710L is equipped with a built-in 800mAh lithium-polymer battery, rechargeable via a USB-C cable.
- Charging: Connect the mouse to a power source using the provided USB-C cable. The red light indicator will be ON during charging.
- Full Charge: The red light indicator will turn OFF when charging is complete (approximately 3 hours for a full charge).
- Low Battery: The red light indicator will flash quickly for 5 seconds when the battery is low.
- Battery Life: A full charge provides up to 90 days of battery life, depending on usage frequency. A 5-minute charge can provide a whole day of use.
- Sleep Mode: The mouse enters sleep mode after 10 minutes of inactivity.
- Wake Up: The mouse wakes up within 2 seconds when moved or a button is pressed.
Maintenance
- Keep the mouse clean by wiping it with a soft, dry cloth.
- Avoid exposing the mouse to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble the mouse, as this may void the warranty.
- Store the USB receivers in the designated compartment on the bottom of the mouse when not in use to prevent loss.
Troubleshooting
- Mouse not responding: Ensure the mouse is charged and turned on. Check the connection mode (2.4GHz, Bluetooth, or wired) and ensure it matches your device's connection. For 2.4GHz, try plugging the receiver into a different USB port. For Bluetooth, re-pair the device.
- Lag or intermittent connection: Ensure the mouse is within the 10m operating distance. Reduce interference from other wireless devices.
- DPI not changing: Ensure the mouse driver is installed if you are trying to adjust DPI in 50-interval steps or if the physical DPI button is not responding.
- M+ Cross-Computer not working: Verify that the mouse driver is installed on all computers and that all computers are connected to the same Wi-Fi or Ethernet network.
- Mouse not working on certain surfaces: The optical sensor works on most surfaces but is not suitable for glass or mirror surfaces.
User Tips
- The side scroll wheel is functional in applications like Excel and photo editing software, enhancing navigation.
- For users who prefer a quieter clicking experience, consider Rapoo's MT760 series, as the MT710L features tactile mechanical switches with a crisp, audible click.
- The ergonomic design with a higher hump and larger thumb rest is suitable for medium to large hands (≥18cm or 5.4in), providing natural palm rest and reducing strain.
Warranty and Support
Rapoo is committed to providing premium products and customer support. For driver downloads and further assistance, please visit the official Rapoo website: www.rapoo.com. Search for "MT750PLUS" to find the relevant driver and support information for your MT710L mouse.