1. Introduction
Thank you for purchasing the Godox MF12 Macro Flash. The MF12 is a versatile mini macro flash designed for close-up photography, offering both TTL automatic flash and M (manual) flash modes. It features a built-in 2.4G wireless X system for seamless integration with Godox triggers and compatibility with various camera brands.
Its compact size, professional optical lens design, and built-in rechargeable lithium battery make it ideal for macro photography of animals, plants, food, jewelry, and oral images.

Figure 1: Godox MF12 Macro Flash setup with camera and various accessories.
Main Features:
- Equipped with TTL automatic flash mode and M manual flash mode.
- Having S1 / S2 secondary optic triggering modes.
- Using a constant light LED modeling light.
- Adopted professional optical lens which offers more even lights.
- Built-in 2.4G wireless X system.
- Selecting the clear OLED display.
- With built-in lithium battery which can be charged through Type-C port.
- Max. 1.7s recycle and 500 full power pops.
2. Safety Warnings
- Always keep this product dry.
- Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
- Keep out of reach of children.
- Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it.
- Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise visual impairment may occur.
- Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.
- Do not leave or store the flash unit if the ambient temperature reads over 50°C. Otherwise the electronic parts may be damaged.
- As this product does not have waterproof function, please take measures of waterproof in rainy or damp environment.
- Turn off the flash unit immediately in the event of malfunction.
3. Product Overview
3.1. Names of Parts

Figure 2: MF12 Flash Unit (Body and Control Panel)
Body Components:
- Light Body
- Wireless Sensor
- Type-C USB Port (only for charging)
- Reset Hole
- Angle Adjusting Bracket
- Push Button of Bracket
- Lens
- Modeling Lamp
Control Panel:
- Display
- Menu Button
- Power Switch
- Modeling Lamp Button
- Test Button
- Set Button
- Select Dial
3.2. Included Items (MF12-K2 Two-light Kit)

Figure 3: MF12-K2 Kit Contents
- MF12 Flash x2
- Flash Stand x2
- Cold Shoe Adapter x2
- Carry Case CB31 x1
- Color Filter Holder x2
- Color Effects Set MF-11C x2
- Extreme Close-Up Positioning Adapter x2
- Mounting Ring MF-AR x1
- Color Temperature Adjustment Set MF-11T x2
- Type-C USB Cable x2
- Adapter Rings Kit AR-R Kit x1
3.3. Optional Accessories
The product can be used in combination with the following optional accessories to achieve best photography effects:
- XPro, X1, and X2 TTL flash triggers
- MF-AR adapter ring
- Camera lens adapter rings kit (49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm)

Figure 4: Optional accessories for MF12.
4. Setup Instructions
4.1. Installing the Cold Shoe Adapter
- Press and hold down the push button of the MF12's fixing bracket.
- Aim one end of the cold shoe adapter into the end of the bracket and slide it in until a "click" is heard.
- Attach the cold shoe adapter onto the hotshoe of your camera.
- Turn the locking ring on the cold shoe adapter to secure it.
4.2. Using the Adapter Ring (Optional)
- Choose an adapter ring (from the AR-R Kit) that matches the filter thread size of your camera lens (available sizes: 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm).
- Screw the chosen adapter ring onto your camera lens.
- Aim the socket of the MF12 (with the arrow pointing towards the mounting ring) into the sliding block of the MF-AR mounting ring and push it until a "click" is heard.
- The MF12 can be rotated leftwards or rightwards by pressing the push button of the bracket.
- Multiple MF12 units can be installed on one MF-AR mounting ring (up to 6 lights).
Video 1: MF12 Macro Flash Multi-flash Setup and Off-camera Setup Tutorial.
4.3. Accessory Installation
Color Filter Installation:
- Put the desired color filter (from MF-11C or MF-11T sets) into the color filter holder.
- Mount the color filter holder onto the front of the MF12 flash head.
Extreme Close-Up Positioning Adapter:
Mount the extreme close-up positioning adapter onto the front of the MF12 flash head. This adapter features a specially designed slope structure that helps to illuminate inwards and light up narrow spaces right before the lens, especially suitable for shooting extreme close-up subjects.

Figure 5: MF12 with Extreme Close-Up Positioning Adapter.
5. Operating Instructions
5.1. Power Management
- To turn on/off the MF12, press the Power Button.
- If not used for a long time, please turn off the power.
Auto Power Off Mode Setting:
- Press the Menu Button.
- Rotate the Select Dial to choose "STBY".
- Press the Set Button.
- Rotate the Select Dial to choose between "30min", "60min", "90min", or "OFF".
- Press the Set Button to confirm.
Note: When using off-camera, it is recommended to turn off the "auto power off" mode through C.Fn-STBY.
5.2. Modeling Lamp
Turning On/Off:
- Short press the Modeling Lamp Button to control the on/off of the LED modeling lamp.
- Long press the Modeling Lamp Button to enter the modeling lamp interface, then short press the Set Button to on/off the modeling lamp.
Brightness Setting:
- Long press the Modeling Lamp Button to enter the modeling lamp interface.
- Rotate the Select Dial to adjust the brightness value from 1 to 10 levels.
5.3. Flash Mode Selection
The MF12 has TTL autoflash and M manual flash modes. Short press the Menu Button, rotate the Select Dial to choose "MODE", then short press the Set Button and rotate the Select Dial to choose "TTL" or "M" mode. Press the Set Button to exit.
TTL Autoflash Mode:
In TTL mode, the camera's metering system and the flash work together to calculate the correct exposure for the subject and the background. Choose TTL mode and press the Menu Button to return to the main interface.
M Manual Flash Mode:
In M mode, you manually set the flash output. The flash output is adjustable from 1/128 to 1/1 full power in 0.1 and 1 step increments. Choose M mode and press the Menu Button to return to the main interface. Rotate the Select Dial to set the flash output value.
5.4. Light Control Flash (PHOTOC) Setting
In M manual mode, press the Menu Button to enter C.Fn and turn the Select Dial to choose "PHOTOC". Then, press the Set Button and turn the Select Dial to choose S1 or S2 function.
S1 Secondary Optic Triggering:
Choose S1. The MF12 can be used as an auxiliary light for manual flash environments. It will trigger synchronously with the first flash of the main flash.
S2 Secondary Optic Triggering with Anti-preflash:
Choose S2. The MF12 can be used as an auxiliary light for TTL automatic flash environments. It has an anti-preflash function, triggering synchronously with the second flash of the main flash (after the camera's pre-flash).
Note: MF12 flash only supports S1/S2 light control flash in M manual flash mode.
5.5. Wireless Radio Transmission (2.4G)
The MF12 uses Godox 2.4G wireless X system and can be used with X1, XPro, and X2 triggers. It automatically switches compatibility for Canon, Nikon, Sony, Panasonic, Olympus/Fuji systems.
Wireless (WL) Setting:
- Press the Menu Button to enter C.Fn custom setting.
- Turn the Select Dial to choose "WL".
- Press the Set Button.
- Turn the Select Dial to choose "ON" (wireless function turned on) or "OFF" (wireless function turned off).
- Press the Set Button to confirm.
Channel (CH) Setting:
To prevent signal interference, ensure the transmitter and receiver units are set to the same channel (CH).
- Press the Menu Button to enter C.Fn menu.
- Turn the Select Dial to choose "CH".
- Press the Set Button.
- Turn the Select Dial to choose a channel from 01-32.
- Press the Set Button to exit.
Group (GR) Setting:
- Enter C.Fn menu.
- Turn the Select Dial to choose "GR".
- Press the Set Button.
- Turn the Select Dial to choose a group from A/B/C/D/E.
- Press the Set Button to exit.
ID Setting:
- Enter C.Fn menu.
- Turn the Select Dial to choose "ID".
- Press the Set Button.
- Turn the Select Dial to choose an ID from OFF or 01-99.
- Press the Set Button to exit.
Note: ID setting is only available when the main unit (trigger) has this function.

Figure 6: MF12 with XPro trigger for 2.4G Wireless Control.
6. Technical Specifications
| Feature | Specification |
|---|---|
| Model | MF12 |
| Built-in Lithium Battery | 3.7V/1700mAh |
| Guide No. (1/1 output) | GN=16.1 (±0.1) |
| Flash Power | 12W |
| Output Level | 8 levels: 1/128~1/1 |
| Brightness of LED Modeling Lamp | 1~10 Levels |
| Display | OLED Display |
| Optical Flash | S1 Secondary Optic Triggering / S2 Secondary Optic Triggering with Anti-preflash |
| Flash Mode | TTL Autoflash, M manual flash |
| Flash Duration | 1/1200s~1/34000s |
| 2.4G Wireless Transmission | ON/OFF |
| Channel | 32 channel: 1~32 |
| Group | 5 group: A/B/C/D/E |
| ID | OFF/01~99 |
| Transmission Distance | 30m |
| Type-C Power Charging | 5V 2A |
| Full Power Flashes | Approx. 500 |
| Recycle Time | Approx. 0.01~1.7s |
| Battery Level Indication | Indicator shows on the upper right corner of the display |
| Power Saving | Auto power off after 30/60/90min of inactivity. OFF mode disables energy-saving. |
| 2.4G Wireless Frequency Range | 2413.0MHz-2464.5MHz |
| Size | 81*76.5*64.3mm |
| Net Weight | ≈144g |

Figure 7: Technical Specifications.
7. Maintenance
- Shut down the device immediately should abnormal operation be detected.
- Avoid sudden impacts and the product should be dedusted regularly.
- It is normal for the light beads to be warm when in use. Avoid continuous flashes if unnecessary.
- Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories.
- If the product had failures or was wetted, do not use it until it is repaired by professionals.
- Changes made to the specifications or designs may not be reflected in this manual.
8. Troubleshooting
8.1. Reasons & Solutions for Not Triggering in Godox 2.4G Wireless System:
- External 2.4G signal interference: If there is interference from wireless base stations, Wi-Fi routers, Bluetooth, etc., adjust the channel (CH) setting on the trigger (suggest +10) to find a non-interfered channel, or turn off other 2.4G equipment.
- Flash recycle or overheat protection: Ensure the flash has finished recycling (ready indicator is lit) and is not in overheat protection. If in TTL mode, try changing to M mode (TTL mode requires a pre-flash).
- Distance between trigger and flash is too close: If the distance is less than 0.5m, turn on "close distance wireless mode" on the flash trigger.
- X1 series: Press and hold the flash button, then turn on the machine until the indicator light flashes twice.
- X2, XPro series: Set C.Fn-DIST to 0-30m.
- Low battery: Replace the battery (disposable alkaline 1.5V batteries are recommended for the flash trigger).
8.2. Forced Shutdown Function:
If the unit crashes or cannot be operated, insert a needle into the reset hole to force shutdown the device.
8.3. Over-Temperature Protection:
When the flash fires up to 50 times continuously at 1/1 full power, an Over-Temperature Protection symbol will appear. It is recommended to temporarily stop using the macro flash to allow it to cool down.
8.4. Reset Function:
Long press the Menu Button and Modeling Lamp Button simultaneously to reset the flash unit to factory settings.
9. Warranty & Support
This product is covered by a warranty. Please refer to the warranty card included in your package for specific terms and conditions. Keep your warranty card safe as it is an important certificate for maintenance service.
9.1. How to Get Maintenance Service:
You can contact your product distributor or an authorized service institution directly. Alternatively, you can contact Godox after-sale service by calling +86-755-29609320-8062. When applying for maintenance service, you should provide a valid warranty card. If a valid warranty card cannot be provided, maintenance service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
9.2. Inapplicable Cases:
The warranty and service offered by this document are not applicable in the following cases:
- The product or accessory has exceeded its warranty period.
- Breakage or damage caused by inappropriate usage, maintenance, or preservation (e.g., improper packing, non-intended use, improper plugging, dropping, external force, exposure to improper temperature, solvents, acids, alkalis, water immersion, or damp environments).
- Breakage or damage caused by non-authorized institutions or staff during installation, maintenance, alteration, or detachment.
- Original identifying information of the product or accessory is modified, altered, or removed.
- No valid warranty card.
- Breakage or damage caused by using illegally authorized, nonstandard, or non-public released software.
- Breakage or damage caused by force majeure or accident.
- Breakage or damage that could not be attributed to the product itself.
- Normal discoloration, abrasion, and consumption are not considered breakage within the maintenance scope.
For detailed warranty information, please refer to the "Product Maintenance Information" section in the included manual or contact Godox customer service.
PDF User Manual: A comprehensive user manual in PDF format is available for download. View User Manual (PDF)
10. User Tips
- When purchasing a kit, verify the contents immediately upon delivery. Some kits, like the MF12-K2, include multiple flash units and specific accessories. Ensure all items are present according to the kit description.
- For optimal wireless performance, especially in environments with potential interference, experiment with different channels (CH) and IDs to find the most stable connection.
- Utilize the modeling light feature to preview lighting effects before taking a shot, which can save time and improve results in macro photography.
- When using multiple flashes, adjust their positions and angles on the mounting ring to achieve desired lighting effects and minimize shadows.