AIFEN AIFEN-868D

Contents

AIFEN-868D Hot Air Station User Manual

Model: AIFEN-868D

1. Introduction

The AIFEN-868D Hot Air Station is a high-performance, ultra-precise tool designed for professional BGA welding and repair tasks. It features advanced chip program control for rapid and accurate temperature regulation, offering superior performance compared to traditional AC voltage-controlled hot air blowers. The unit is equipped with a powerful fan in the handle, ensuring stable and strong air output. This manual provides essential information for the safe and effective operation of your AIFEN-868D Hot Air Station.

2. Safety Instructions

Always observe the following safety precautions when using the AIFEN-868D Hot Air Station:

  • Ensure the power supply matches the unit's requirements (110V or 220V).
  • Do not touch the hot air nozzle or heated components during operation or immediately after use.
  • Use in a well-ventilated area to avoid inhaling fumes.
  • Keep flammable materials away from the working area.
  • Always place the hot air gun handle in its bracket when not in use to activate the automatic sleep function.
  • Do not operate the unit if the power cord or unit itself is damaged.
  • Keep out of reach of children.

3. Package Contents

Verify that all items are present in your package:

  • AIFEN-868D Hot Air Station (1 unit)
  • Air Gun Nozzles (4 pieces: 2 straight wind, 2 spiral wind)
  • Air Gun Handle (1 piece)
  • Product Manual (1 piece)
AIFEN-868D Hot Air Station with included nozzles
Figure 3.1: AIFEN-868D Hot Air Station with included accessories.

4. Product Features

  • Advanced Temperature Control: Utilizes a chip program for faster and more accurate temperature regulation.
  • High-Power Fan: Enlarged fan in the handle provides a larger and more stable air volume.
  • Versatile Air Nozzles: Integrated air outlet handle allows switching between direct and spiral air by changing nozzles.
  • Temperature Calibration: Includes a function for precise temperature calibration.
  • Temperature Unit Conversion: Supports conversion between Fahrenheit (°F) and Celsius (°C).
  • Automatic Sleep Function: The unit automatically enters sleep mode when the handle is placed on its support, enhancing safety and extending heater life.
  • LCD Digital Display: Clearly shows temperature during normal operation and adjustment, and automatically converts to display air volume when adjusted.
  • Robust Power Supply: Features a high-power pure copper transformer for reliable power delivery.
  • Efficient Design: Incorporates a brushless vortex fan, SMD circuit board, and plug-in terminal block design for neat and beautiful internal routing.

5. Specifications

ParameterValue
Model NumberAIFEN-868D
Power700W
Power SupplyAC 220V 50/60Hz / AC 110V 50/60Hz
Temperature Range100-500°C / 212-932°F
Air Volume Range20-100 levels
Dimensions (L x W x H)155mm x 100mm x 140mm
Net Weight1.65kg
CertificationCE
Dimensions of the AIFEN-868D Hot Air Station
Figure 5.1: AIFEN-868D Hot Air Station dimensions (Length: 155mm, Width: 100mm, Height: 140mm).

6. Component Identification

Familiarize yourself with the main components of your AIFEN-868D Hot Air Station:

  • Main Unit: Houses the control circuitry, power supply, and display.
  • LCD Digital Display: Shows current temperature and air volume settings.
  • Temperature Setting Buttons (TEMP): Used to increase or decrease the target temperature.
  • Air Volume Setting Buttons (AIR): Used to increase or decrease the air flow level.
  • CAL Button: For temperature calibration.
  • Power Switch: Turns the unit ON/OFF.
  • Air Gun Handle: The handheld part that delivers hot air.
  • Handle Bracket: A stand for the air gun handle, which also triggers the automatic sleep function.
  • Air Nozzles: Interchangeable nozzles for different air flow types (direct and spiral) and sizes (7mm, 10mm, 12mm).
AIFEN-868D control panel showing automatic sleep, temperature conversion, calibration, and cooling features
Figure 6.1: Control panel with display and function buttons. Features include Automatic sleep, °C/°F conversion, Temperature calibration, and Automatic cooling.
Close-up of air gun handle and various nozzles
Figure 6.2: Air gun handle with integrated air outlet design and various nozzles: 12mm Cyclone Air Nozzle, 10mm Cyclone Air Nozzle, 10mm Straight Air Nozzle, 7mm Straight Air Nozzle. The handle is equipped with a high-power fan for large and soft air volume.

7. Setup

  1. Unpacking: Carefully remove all components from the packaging.
  2. Placement: Place the main unit on a stable, heat-resistant surface in a well-ventilated area.
  3. Connect Handle: Plug the air gun handle cable into the designated port on the main unit.
  4. Attach Nozzle: Select the appropriate air nozzle for your task and securely attach it to the air gun handle. The unit supports both direct and spiral wind nozzles.
  5. Power Connection: Connect the power cord to the main unit and then to a suitable power outlet (110V or 220V, depending on your unit's configuration).

8. Operating Instructions

  1. Power On: Flip the power switch to the 'ON' position. The LCD digital display will illuminate.
  2. Set Temperature: Use the 'TEMP' up/down buttons to adjust the desired temperature. The display will show the set temperature in real-time.
  3. Set Air Volume: Use the 'AIR' up/down buttons to adjust the air flow level (20-100). The display will temporarily show the air volume setting.
  4. Begin Operation: Lift the air gun handle from its bracket. The unit will begin heating to the set temperature and blowing air at the set volume.
  5. Automatic Sleep: When you place the air gun handle back into its bracket, the unit will automatically enter sleep mode, cooling down the heating element and stopping the air flow.
  6. Temperature Unit Conversion: The unit supports conversion between Fahrenheit and Celsius. Refer to the specific button (often 'CAL' or a combination) for this function.
  7. Temperature Calibration: If precise temperature is critical, use the 'CAL' button to enter calibration mode and adjust as needed.
Hand adjusting air volume on AIFEN-868D
Figure 8.1: Adjusting air volume using the control buttons.
Internal chip control system of AIFEN-868D
Figure 8.2: The AIFEN-868D utilizes a chip program to control temperature, ensuring faster and more accurate heating compared to AC transformer-controlled units.
Video 8.1: A brief overview of the AIFEN-868D Hot Air Station, demonstrating its components and basic operation, including temperature and air volume adjustments, and the automatic sleep function.

9. Maintenance

To ensure the longevity and optimal performance of your hot air station:

  • Cleaning: Regularly clean the air gun nozzle and the main unit with a soft, dry cloth. Ensure the unit is unplugged and cooled down before cleaning.
  • Nozzle Care: Inspect nozzles for blockages or damage. Replace worn-out nozzles to maintain efficient airflow.
  • Storage: Store the unit in a dry, dust-free environment when not in use.

10. Troubleshooting & FAQ

Q: The unit does not power on.
A: Check the power cord connection to both the unit and the wall outlet. Ensure the power switch is in the 'ON' position. Verify that the power outlet is functional.
Q: The temperature is not stable or accurate.
A: Ensure the air gun handle is properly seated in its bracket when not in use. If the issue persists, perform a temperature calibration using the 'CAL' button as described in the operating instructions.
Q: What voltage does the AIFEN-868D support?
A: The AIFEN-868D supports both AC 110V 50/60Hz and AC 220V 50/60Hz power supplies. Please ensure you have the correct version for your region.

11. User Tips

  • For tasks requiring high precision, such as reballing BGA components, the AIFEN-868D's chip-controlled temperature system offers enhanced accuracy and stability.
  • Utilize the different air nozzles (straight and spiral wind) to optimize airflow for various applications. The cyclone nozzles are often preferred for broader heating, while straight nozzles provide more focused heat.
  • Take advantage of the automatic sleep function by always returning the handle to its bracket. This not only saves energy but also prolongs the life of the heating element and ensures safety.
  • Experiment with the air volume settings (20-100 levels) to find the ideal balance between heat and airflow for your specific soldering or desoldering needs.

12. Warranty & Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.