M5Stack Core2 for AWS

Contents

M5Stack Core2 ESP32 IoT Development Kit for AWS IoT EduKit User Manual

Model: K010-AWS

1. Introduction

The M5Stack Core2 ESP32 IoT Development Kit for AWS IoT EduKit is a powerful and versatile development platform designed for learning and building Internet of Things (IoT) projects, especially those integrating with Amazon Web Services (AWS). Based on the ESP32 microcontroller, it features a 2-inch touch screen, various sensors, and connectivity options, making it ideal for a wide range of applications from STEM education to DIY projects and IoT controllers.

M5Stack Core2 for AWS IoT EduKit device
The M5Stack Core2 for AWS is a dedicated kit for AWS IoT learning projects.

2. What's in the Box

The package includes the following components:

  • M5Stack Core2 x 1
  • M5GO Bottom2 for AWS x 1
  • USB Type-C cable (50cm) x 1
  • Hex wrench x 1
Contents of the M5Stack Core2 for AWS package
Package contents: M5Stack Core2, M5GO Bottom2, USB-C cable, and hex wrench.

3. Product Overview

The M5Stack Core2 for AWS is a compact and feature-rich device. Key components and interfaces are detailed below:

Detailed diagram of M5Stack Core2 for AWS components
Annotated diagram of the M5Stack Core2 for AWS, highlighting its features.

Key Features:

  • Touch Screen: 2-inch LCD with 320x240 resolution.
  • Microcontroller: ESP32-D0WDQ6-V3 (240MHz dual core, 520KB SRAM, Wi-Fi).
  • Memory: 16MB Flash, 8MB PSRAM.
  • Sensors: MPU6886 (IMU), SPM1423 (PDM Microphone), BM8563 (RTC).
  • Security: ATECC608A Secure Element.
  • Power Management: AXP192.
  • Connectivity: USB-C, POGO PIN (I2C), PORT.A, PORT.B, PORT.C.
  • User Interface: Power button, RST button, 3 virtual screen buttons, SK6812 RGB LEDs.
  • Storage: TF Card slot.
  • Audio: 1W Speaker (NS4168).
  • Dimensions: 54x54x24mm.
  • Supported Platforms: UIFlow, Arduino, FreeRTOS, MicroPython.

Applications:

M5Stack Core2 for AWS application examples
The M5Stack Core2 for AWS can be used for STEM education, DIY projects, and as an IoT controller.

4. Specifications

Detailed technical specifications for the M5Stack Core2 for AWS:

M5Stack Core2 for AWS specification table
Table of M5Stack Core2 for AWS specifications.
Specification Parameter
SoC ESP32-D0WDQ6-V3, 240MHz dual core, 600 DMIPS, 520KB SRAM, Wi-Fi
Flash 16MB
PSRAM 8MB
Hardware Encryption Chip ATECC608B-TNGTLSU-G (addr 0x35)
Input Voltage 5V @ 500mA
Host Interface Type-C x1, POGO PIN x1, I2C x1, GPIO x1, UART x1
Programmable LED SK6812*10
Buttons Power button, RST button, 3 virtual screen buttons

5. Setup

To get started with your M5Stack Core2 for AWS, follow these general steps:

  1. Initial Power-Up: Connect the M5Stack Core2 to a power source using the provided USB Type-C cable. The device should power on automatically or by pressing the power button.
  2. Accessing Documentation and Tutorials: M5Stack provides extensive online resources. To find tutorials and detailed guides:
    • Visit the official M5Stack website: m5stack.com
    • Navigate to the "DOCUMENT" section.
    • Search for "Core2 for AWS" or browse the product categories.
    • Look for the "Tutorial" section specific to your device.
  3. Software Environment Setup: Depending on your chosen development platform (UIFlow, Arduino, FreeRTOS, MicroPython), you will need to set up the appropriate development environment on your computer. Refer to the M5Stack documentation for specific instructions on installing drivers, IDEs, and libraries.
Steps to access M5Stack tutorials online
Guide to finding online tutorials for your M5Stack device.

6. Operating Instructions

The M5Stack Core2 for AWS features a touch screen and various integrated components. Here's how to interact with it:

6.1 Basic Operation

  • Power On/Off: Press the power button briefly to turn on. To turn off, hold the power button for approximately 6 seconds.
  • Screen Interaction: The 2-inch capacitive touch screen allows for intuitive interaction. Swipe to navigate through menus and tap to select options.
  • Virtual Buttons: The device includes three virtual screen buttons for additional input.
  • Reset: Use the RST button for a soft reset of the device.

6.2 Feature Demonstration (Video)

Watch this video for a demonstration of the M5Stack Core2's various hardware features, including the Real-time Clock, IMU Sensor, Microphone, LED Bars, Power Management, Capacitive Touch, Crypto-Auth, and Wi-Fi Scan functionality.

Video demonstrating the M5Stack Core2 for AWS hardware features.

6.3 Specific Component Interactions (as seen in video)

  • BM8563 Real-time Clock: An accurate, low-powered real-time clock.
  • MPU6886 IMU Sensor: Senses the motion of the device (Rot_X, Rot_Y, Rot_Z).
  • SPM1423 Microphone: An enhanced far-field MEMS microphone.
  • SK6812 LED Bars: Ten RGB LEDs that allow individual control of brightness and color. Tap or hold to change colors (Red, Green, Blue).
  • AXP192 Power Management: Provides power management for the battery and on-board peripherals. Tap to toggle LED, Motor, and Screen power.
  • FT6336U Capacitive Touch: A capacitive touch panel controller that provides X and Y coordinates for touch input.
  • ATECC608 Crypto-Auth: Comes with pre-provisioned static certificates, along with Elliptic Curve Digital Signature Algorithm (ECDSA) sign/verify capability.
  • Wi-Fi Scan (2.4GHz): Built-in 2.4GHz Wi-Fi and Bluetooth shared radio for scanning available networks.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device using the provided USB Type-C cable and a compatible 5V power adapter.
  • Handling: Handle the device with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.

8. Troubleshooting

Problem Possible Cause / Solution
Device does not power on. Ensure the battery is charged. Connect the USB-C cable to a power source. Press and hold the power button for a few seconds.
Screen is unresponsive. Perform a soft reset by pressing the RST button. Ensure the screen is clean and dry.
Wi-Fi/Bluetooth connectivity issues. Check your network settings. Ensure the device is within range of the Wi-Fi/Bluetooth signal. Try restarting the device and your router/Bluetooth host.
Programming or code upload failures. Verify that the correct drivers are installed and the development environment is properly configured. Check the USB-C connection. Consult M5Stack's online documentation and community forums for specific programming guides.

9. User Tips

  • Explore Documentation: The M5Stack website (m5stack.com) is an invaluable resource for detailed tutorials, examples, and API references for various programming environments.
  • Community Support: Engage with the M5Stack community forums or online groups. Many users share projects, solutions, and tips that can be very helpful.
  • Start Simple: If you're new to IoT development, begin with basic examples to understand the Core2's functionalities before moving on to complex projects.
  • Power Management: Be mindful of power consumption in your projects, especially when running on battery. Utilize the AXP192 power management features to optimize battery life.

10. Warranty & Support

For detailed warranty information, technical support, and further assistance with your M5Stack Core2 ESP32 IoT Development Kit, please refer to the official M5Stack website or contact the M5Stack Official Store directly.

Official Website: m5stack.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.