ICANING G20 Series Smart Voice Air Mouse Remote Control User Manual

1. Product Overview

The ICANING G20 Series offers a range of smart voice air mouse remote controls designed for various devices such as Android TV Boxes, Smart TVs, PCs, and more. These remotes combine air mouse functionality with gyroscope, voice control, and in some models, backlight and IR learning capabilities for enhanced user experience.

Model Variations:

• G20BTS Plus: Features Bluetooth 5.0, Backlight, Voice Control, Gyroscope, and IR learning function.
• G20S PRO: Features Backlight, Voice Control, Gyroscope, and IR learning function.
• G20S: Features Voice Control, Gyroscope, and IR learning function.
• G20BTS: Features Bluetooth 5.0 and Gyroscope function. (No voice or backlight, no USB receiver)

Figure 1: Overview of G20 Series Remote Control Models

2. Package Contents

• 1 x G20 Air Mouse Remote Control (battery not included)
• 1 x USB Receiver (for 2.4G models)

3. Compatibility Notes

• The remote control may not be compatible with some Smart TVs if they block third-party USB dongles or do not support external remote controls. Verify your Smart TV's compatibility.
• For Android TV Boxes, it is recommended to install "Google Assistant" for full voice control functionality.
• When using G20BTS Plus or G20S Pro BT with Android 10 ATV systems (e.g., MECOOL KM6, KM3, KM2, KM1), the voice search, gyroscope, and remote control functions can operate via Bluetooth 5.0 without the USB receiver.
• For non-ATV Android set-top boxes, voice search may require the USB receiver even for Bluetooth-enabled models.
• Only the power button and mute button can typically be programmed for IR learning.

Figure 2: G20BTS Plus Compatibility

4. Setup

4.1 Battery Installation

1. Open the battery compartment cover on the back of the remote control.
2. Insert two AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover.

Figure 3: Battery Installation

4.2 USB Receiver Connection (for 2.4G models)

1. Locate the USB receiver (if included with your model).
2. Plug the USB receiver into an available USB port on your computer, Android TV Box, or other compatible device.
3. Wait for your device to automatically detect and install the necessary drivers. The remote should be ready for use once the driver installation is complete.

Figure 4: USB Receiver Connection

4.3 Bluetooth Pairing (for G20BTS Plus / G20BTS models)

For models with Bluetooth 5.0, you can connect via Bluetooth without the USB receiver (though a USB dongle can also enable 2.4G wireless with gyroscope).

1. Ensure your device's Bluetooth is enabled.
2. On the remote, press and hold the [OK] and [Return] buttons simultaneously for a few seconds.
3. The indicator light on the remote will flash, indicating it's in pairing mode.
4. On your device, search for Bluetooth devices and select "G20S Pro" (or similar device name) to pair.
5. The indicator light will stop flashing once successfully paired.

Figure 5: Bluetooth Pairing Instructions

5. Operating Instructions

5.1 Button Functions

Figure 6: Remote Control Button Layout and Functions

• Power: Turns the device on/off. Can be programmed for IR learning.
• Mic: Activates voice control/assistant.
• Indicator: LED light for status.
• Mute: Mutes audio. Can be programmed for IR learning.
• Mouse On/Off: Toggles air mouse function.
• Pg+ / Pg-: Page Up / Page Down.
• Navigation Keys (Up/Down/Left/Right): For menu navigation.
• OK / Enter / Mouse Left: Confirms selection or acts as left mouse click.
• Return / Mouse Right: Goes back or acts as right mouse click.
• Home: Returns to the home screen.
• Voice Assistant Button: Opens Google Voice Assistant.
• Volume - / Volume +: Adjusts volume.
• Play/Pause, Previous, Next: Media playback controls.
• Backspace: Deletes characters.
• Menu: Opens menu options.
• Backlight Button (G20S PRO / G20BTS Plus): Press and hold for 3 seconds to turn the backlight on/off.

5.2 Air Mouse Function (Gyroscope)

The remote is equipped with a gyroscope core compensation algorithm, allowing you to control a cursor on the screen by moving the remote in the air. This provides a natural and intuitive way to interact with your device.

Figure 7: Air Mouse in Operation

5.3 Voice Control

Press the dedicated voice assistant button (or Mic button) and speak your commands. The built-in high-fidelity microphone captures your voice for seamless interaction with Google Assistant or other voice-enabled applications.

Figure 8: Voice Assistant Feature

5.4 Backlight Function (G20S PRO / G20BTS Plus)

The G20S PRO and G20BTS Plus models feature a backlight for easy use in low-light conditions. The laser-engraved characters are clearly illuminated.

• To turn the backlight on or off, press and hold the backlight button (usually located near the '0' key) for 3 seconds.

Figure 9: Backlight Operation

5.5 IR Learning Function

The Power and Mute buttons on the remote can learn infrared codes from your existing TV remote, allowing you to control basic TV functions with your G20 series remote.

1. Enter Learning Mode: Press and hold the [Power] button on the G20 remote until the LED indicator light changes from flashing quickly to flashing slowly. This indicates it's in IR learning mode.
2. Position Remotes: Place your G20 remote and your TV remote head-to-head, about 2-3 cm apart.
3. Transmit Code: Press the [Power] button on your TV remote. The G20 remote's LED indicator will change from flashing slowly to solid, then back to flashing slowly, indicating successful learning.
4. Exit Learning Mode: After successful learning, the product will automatically store the code and exit learning mode. Alternatively, press the [Mute] button to exit.
5. Clear Learned Code: To clear the infrared code value that has been learned, press [OK] + [DEL] simultaneously.

Figure 10: IR Learning Process

5.6 Adjusting Mouse Speed

You can adjust the air mouse cursor speed to your preference:

• Slower Cursor Speed: Press and hold the [OK] button, then click [Volume -]. The LED light will change from blinking to solid, indicating a slower speed.
• Faster Cursor Speed: Press and hold the [OK] button, then click [Volume +]. The LED light will change from blinking to solid, indicating a faster speed.

Figure 11: Mouse Speed Adjustment

6. Maintenance

• Battery Replacement: Replace AAA batteries when the low battery indicator flashes slowly.
• Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using liquid cleaners or abrasive materials.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.

Figure 12: Low Battery Indicator

7. Troubleshooting

• Remote Not Responding:
  • Check battery levels and replace if necessary.
  • Ensure the USB receiver is securely plugged into the device (for 2.4G models).
  • For Bluetooth models, ensure it is properly paired with your device.
  • If the LED indicator is constantly blinking, it might indicate a low battery or a pairing issue.
• Air Mouse Pointer Shakes or is Unstable:
  • Ensure there are no obstructions between the remote and the device.
  • Try adjusting the mouse speed (refer to section 5.6).
• Voice Control Not Working:
  • Ensure the remote is properly connected (via USB receiver or Bluetooth).
  • For Android TV Boxes, ensure "Google Assistant" or a similar voice assistant app is installed and configured.
  • Check microphone permissions on your device.
• IR Learning Fails:
  • Ensure the remotes are placed very close (2-3 cm) and directly facing each other.
  • Only the Power and Mute buttons are programmable for IR learning.
  • Some TV remotes may use different IR frequencies or protocols that are not compatible.
• Not Compatible with Smart TV:
  • Some Smart TVs may not support third-party USB dongles or external remote controls. This is a limitation of the TV, not the remote.

8. Specifications

9. User Tips

• Pointer Stability: Users report that the air mouse pointer works well and is stable, not shaking.
• IR Learning Limitations: Remember that typically only the power and mute buttons can be programmed for IR learning.
• Android TV Box Setup: For optimal voice control on Android TV boxes, ensure you install the "Google Assistant" application.
• Battery Life: The remote is designed for low power consumption, with working current less than 5mA and standby current less than 20uA, contributing to good battery life.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the ICANING Global Store directly. Keep your purchase records for any warranty claims.