1. Introduction
This manual provides detailed instructions for the Hobbywing range of programming devices for brushless Electronic Speed Controllers (ESCs). This includes the LED Program Box (General), LED Program Card-A, Multifunction LCD Program Box Pro, and the OTA Programmer. Each device offers a user-friendly interface for easy and quick ESC programming, firmware updates, and data monitoring.

2. Product Overview and Specifications
2.1 LED Program Box (General)
This compact device is designed for programming HOBBYWING brushless ESCs, making field adjustments straightforward.

Specifications:
- Working Voltage: 4.8-8.4V
- Size: 88 x 58 x 14mm
- Weight: 40g
Applications:
Compatible with PLATINUM V1/V2 series & FLYFUN V5 series brushless aircraft ESCs, XERUN series, EZRUN series & QUICRUN series brushless car ESCs, and SEAKING series brushless boat ESCs.
Note:
- This program box may not be compatible with some XERUN ESCs (e.g., XR8 Plus) or SEAKING ESCs (e.g., SEAKING Pro 160A). Always refer to your ESC's user manual for compatibility.
- This program box is exclusively for HOBBYWING brushless ESCs.
2.2 LED Program Card-A
A pocket-sized program card with a friendly user interface for easy ESC setup.

Specifications:
- Size: 92mm (L) x 52mm (W) x 6mm (H)
- Weight: 26g
- Input Voltage: 4.8-6V (An additional battery may be required if the ESC lacks a built-in BEC).
Applications:
Used to program HOBBYWING FlyFun (Fentium), SkyWalker, Guard (discontinued), and Sword (discontinued) series airplane ESCs.
Note:
- This program card is NOT suitable for Platinum series airplane ESCs.
2.3 Multifunction LCD Program Box Pro
A versatile programming device featuring an LCD screen, USB connectivity, and an OTA Bluetooth module for comprehensive ESC management and battery voltage detection.

Specifications:
- Model: Multifunction LCD Program Box Pro
- Exterior Size: 105.6mm (Length) x 59mm (Width) x 24.4mm (including wheel height)
- Weight: 85g
- Input Voltage: DC 5V-12.6V
Applications:
Compatible with XERUN series car model brushless ESC (V2.0 and above), EZRUN series car model brushless ESC (V2.0 and above), PLATINUM series air model brushless ESC, SEAKING Pro series ship model brushless ESC, and some QUICRUN series ESCs. This also includes ESCs supported by the old LCD G2 program box and OTA Bluetooth module.
Note:
- Compatibility depends on the specific ESC model. Refer to the Hobbywing official website for detailed information.
2.4 OTA Programmer
A Bluetooth module for wireless communication between your ESC and a smart device, enabling convenient parameter setting, firmware upgrades, and data reading via a mobile app.

Specifications:
- Working Voltage: 5V-12.6V
- Supported Bluetooth Version: ≥ 4.0
- Effective Range: 0-3m (Open Field)
- Size: 30.0x25.5x8.5mm (LxWxH)
- Weight: 10.2g
Applications:
Compatible with some XERUN series & EZRUN series car ESCs, some PLATINUM series aircraft ESCs, and some SEAKING series boat ESCs. Always refer to your ESC's manual for specific compatibility.
3. Setup and Connections
3.1 LED Program Box (General)
Connect the programming port of the LED Program Box to the programming port of your HOBBYWING ESC. Ensure the polarity is correct. If your ESC does not have a built-in BEC, an external power supply (4.8-8.4V) may be required for the program box.

3.2 LED Program Card-A
Connect the program card to the ESC's programming port. If the ESC does not have a built-in BEC, an additional battery (4.8-6V) is needed to power the program card. Refer to your ESC manual for specific connection details.

3.3 Multifunction LCD Program Box Pro
The LCD Program Box Pro offers multiple connection methods depending on your ESC and desired function.
ESC Programming:
Connect the program box to the ESC's programming interface. Some ESCs have dedicated programming ports, others share with the fan port, or use the throttle signal line. Always consult your ESC manual for the correct programming interface.

Power Supply:
The program box can be powered via the ESC's programming interface (if it provides voltage output) or an independent battery/UBEC connected to the 5-12.6V (+ -) port. WARNING: Do not supply external power to the program box unless your ESC instructions explicitly state to do so.
USB Connection (for Firmware Update & Parameter Setting via PC):
- Connect the program box to your computer using a USB cable.
- Open the Hobbywing USB LINK application (downloadable from the official Hobbywing website).
- Turn on the ESC.
- Establish a connection within the software to update firmware and set parameters.
Battery Voltage Checker:
Connect the balance charging plug of your LiPo battery pack to the 'BATTERY CHECK' port on the program box. Ensure the negative pole of the balance port aligns with the negative pole symbol on the program box. The device supports 2-8S Li-Polymer/Li-Ion/Li-Fe batteries with a measurement accuracy of ±0.1V. Compatible with XH, EH, HP/PQ standard balance plugs. A conversion cable may be needed for some plugs.
Caution: Do not connect the ESC and USB port simultaneously when using the battery voltage detection function. Dual power connections can damage the device or connected components.

3.4 OTA Programmer
The OTA Programmer connects to your ESC to enable Bluetooth communication with the Hobbywing HW Link App on your smart device.
Connecting to ESC:
The connection method varies based on your ESC's hardware design. Refer to your ESC's user manual for the specific programming port. The OTA Programmer typically uses a tri-black cable for connection.
- For ESCs with multiplexed throttle and programming cable: Connect the tri-black cable to connector A and connector B of the Y harness.
- For ESCs without built-in BEC: Connect the tri-black cable to connector A and connector B of the Y harness. Connect the remaining end (connector C) of the Y harness to the ESC's throttle cable.
- For ESCs with a fan port: Connect the tri-black cable to the fan port.
- For ESCs with a separate programming cable: Connect the tri-black cable directly to the programming port.
- For ESCs requiring a separate power supply: If the programming cable has an output voltage of 5-12.6V, connect the tri-black cable to connector A and B of the Y harness. If there is no output voltage, connect to connector A and B of the Y harness, and the remaining end (C) to a UBEC.

Downloading the Hobbywing HW Link App:
- Android: Search for "HOBBYWING" on their website or Google Play Store.
- iOS: Search for "Hobbywing" in the Apple App Store.
4. Operating Instructions
4.1 LED Program Box (General) & LED Program Card-A
These devices use buttons to navigate and set parameters. The LED display shows the item number and its corresponding value.
- ITEM Button: Press to cycle through programmable items.
- VALUE Button: Press to change the value of the selected item.
- OK Button: Confirm the selected value.
- RESET Button: Reset parameters to factory defaults.
4.2 Multifunction LCD Program Box Pro
This device features an LCD screen and a navigation wheel for intuitive operation.

- Navigation Wheel: Rotate to select the target menu item. Press the wheel to enter the item.
- Save Button: Press to save parameter settings.
- Back/Cancel Button: Press to return to the previous menu. Press and hold for approximately 2 seconds to return to the home page.
Using as a LiPo Battery Voltmeter:
After connecting a LiPo battery balance plug to the 'BATTERY CHECK' port, the LCD screen will display the total battery voltage and individual cell voltages (from 1 to 8 cells).
4.3 OTA Programmer with Hobbywing HW Link App
The OTA Programmer facilitates wireless programming and data management via the Hobbywing HW Link App.
- Connect: Ensure the OTA Programmer is correctly connected to your ESC and the ESC is powered on.
- Open App: Launch the Hobbywing HW Link App on your smart device.
- Pair Bluetooth: If it's your first time, navigate to the app's Bluetooth settings and select "Connect to Bluetooth". A list of available Bluetooth devices will appear. Select "HW-BLE*****" (the specific name may vary). The default password is "888888".
- Status Indicator: The LED light on the OTA Programmer will turn solid blue when successfully connected. A solid red LED indicates successful programming, while a flashing LED indicates data transfer.
- Parameter Adjustment: Once connected, you can set parameters, upgrade firmware, and read data through the app's interface.
- Change Bluetooth Name/Password: Within the app, go to "Settings" -> "Bluetooth Name & Password" to modify these details. Click "OK" to save changes.
5. Maintenance
- Keep the devices clean and free from dust and moisture.
- Store in a dry environment away from extreme temperatures.
- Avoid physical impact or dropping the devices.
- Ensure all connections are secure before operation to prevent damage.
- When not in use, disconnect from power sources.
6. Troubleshooting
6.1 General Issues
- Device not powering on: Check power connections and ensure the input voltage is within the specified range for your model. If using an ESC for power, verify it has a built-in BEC or provide external power.
- No connection to ESC: Ensure the programming cable is correctly inserted into the designated programming port on both the device and the ESC. Check for correct polarity. Refer to your ESC manual for its specific programming port.
- Parameters not saving: Ensure you press the 'OK' or 'Save' button after making changes.
6.2 OTA Programmer Specific Issues
- Bluetooth connection failure: Ensure the OTA Programmer is within the effective range (0-3m in open field). Verify Bluetooth is enabled on your smart device. Try restarting the app and the OTA Programmer.
- Incorrect password: The default password for the OTA Programmer is "888888". If you have changed it and forgotten, you may need to perform a factory reset.
- LED Status: If the LED is not lighting up or behaving unexpectedly, check power and connections.
6.3 Factory Reset
To reset the OTA Programmer to factory default values, locate the RESET button (often a small pinhole). Keep the RESET button pressed with a thin, sharp object (like a toothpick) for approximately 5 seconds. Release the button when the LED flashes. This will reset all parameters.

7. User Tips
- Always check ESC compatibility: Before attempting to program, verify that your specific ESC model is compatible with the programming device you are using. Refer to your ESC's user manual or the Hobbywing official website for the most accurate compatibility information.
- Secure connections: Ensure all cables are firmly connected to prevent intermittent issues during programming or data reading.
- Battery voltage monitoring: The LCD Program Box Pro can be a handy tool for quickly checking your LiPo battery's overall and individual cell voltages before use.
8. Warranty and Support
This product comes with a 12-month manufacturer's limited warranty for defective items. For warranty claims, please provide your order number and details of the defect. Items must be reported and returned within the warranty period, preferably in their original packaging.
For further technical support, detailed product information, or to download the latest firmware and software (such as Hobbywing USB LINK), please visit the official Hobbywing website.
FCC Information (for OTA Programmer):
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.