1. Introduction
The ABBIDOT T20 Dog Training Collar is designed to assist in correcting various dog behaviors such as barking, biting, chewing, jumping, and digging. It offers three safe and effective training modes: Beep, Vibration, and Static Shock, with a remote control range of up to 3000 feet in open spaces. This manual provides essential information for the proper setup, operation, and maintenance of your training collar.

Figure 1: ABBIDOT T20 Dog Training Collar Remote and Receiver
2. Important Safety Information
- Not for Leash Attachment: Do not attach dog leashes to this training collar. It is not designed for walking or restraining your dog.
- Wearing Duration: Avoid leaving the receiver collar on your dog for more than 12 hours per day. It is recommended to use it for a maximum of 6 hours daily. Prolonged wear can lead to skin irritation.
- Repositioning: Reposition the receiver on your pet's neck every 1 to 2 hours to prevent pressure sores and allow the skin to breathe.
- Skin Check: Check your dog's skin condition daily for any signs of redness, irritation, or sores, especially around the contact points. If irritation occurs, discontinue use and consult a veterinarian.
- Supervision: Always supervise your dog during training sessions.
- Age and Health: This collar is intended for healthy dogs over 6 months old. Do not use on aggressive, sick, or injured dogs.
3. Package Contents
The ABBIDOT T20 Dog Training Collar package typically includes:
- Remote Transmitter
- Receiver Collar
- Adjustable Nylon Strap
- USB Charging Cable
- Test Light Tool
- Contact Points (short and long)
- User Manual (this document)
4. Product Features and Components
4.1 Remote Control Features

Figure 2: Remote Control and Receiver Collar Features
- Selecting Channels: Switch between training Dog 1 or Dog 2.
- Operation Feedback Indicator: Light indicating remote activity.
- Tone Button: Activates the Beep mode.
- Vibration Button: Activates the Vibration mode.
- Shock Button: Activates the Static Shock mode.
- Volume Button: Adjusts settings (e.g., shock levels).
- Security Keypad Lock: Prevents accidental activation of commands.
- USB Battery Charging Port: For charging the remote.
- LCD Screen: Displays current settings, battery level, and dog channel.
- Wrist Strap: For secure handling of the remote.
4.2 Receiver Collar Features
- Indicator Light: Shows operational status and battery level.
- USB Battery Charging Port: For charging the receiver.
- On/Off Button: Powers the receiver on or off.
- Contact Points: Deliver static shock stimulation.
- IPX7 Waterproof: The receiver collar is waterproof, allowing your dog to swim or play in the rain without damage.

Figure 3: IPX7 Waterproof Design
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ABBIDOT |
| Model Number | T20 |
| Item Type | Training Collars |
| Target Pet | Dog |
| Material | Plastic |
| Battery Included | Yes (3 Lithium ion batteries required) |
| Whether Electrical | Yes |
| Is Smart Device | No |
| Application | Suitable for small, medium, and large dogs (5 lbs to 100 lbs) |
| Features | Rechargeable, Waterproof (IPX7), Durable |
| Remote Control Range | Up to 3000ft (in open space) |
| Training Functions | Static Shock (1-16 levels), Beep, Vibration |
| Frequency | 433.92 MHz |
| Collar Strap Length | Adjustable from 7 inches to 27 inches |
| Receiver Dimensions | Approx. 2.35 inches (width) x 1.35 inches (height) |
| Receiver Weight | Approx. 0.12 Lb |
| Battery Life (Receiver) | Up to 30 days work time, 180 days standby |
| Battery Life (Remote) | Up to 60 days work time |
| Charging Time | 1.5 - 2 hours (Quick Charge) |

Figure 4: Collar Dimensions and Weight

Figure 5: Battery Life and Charging
6. Setup Guide
6.1 Charging the Devices
- Connect the USB charging cable to the charging ports on both the remote transmitter and the receiver collar.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a computer USB port.
- Charge both devices for approximately 1.5 to 2 hours until fully charged. The indicator lights will change to show charging status (e.g., solid light when charging, off or green when fully charged).
6.2 Attaching and Fitting the Collar
- Thread the adjustable nylon strap through the receiver collar.
- Select the appropriate contact points (short for short-haired dogs, long for long-haired dogs) and screw them firmly onto the receiver.
- Place the collar around your dog's neck, ensuring the contact points touch the skin.
- Adjust the strap so that it is snug but not too tight. You should be able to fit two fingers comfortably between the strap and your dog's neck. A proper fit is crucial for the static shock function to work effectively and safely.
6.3 Pairing Remote and Receiver
The devices are usually pre-paired from the factory. If re-pairing is needed:
- Turn on the remote transmitter.
- Turn on the receiver collar.
- Press and hold the power button on the receiver collar until the indicator light flashes rapidly.
- Within 10 seconds, press any training button (Beep, Vibrate, or Shock) on the remote.
- If successful, the receiver collar will beep, and the indicator light will stop flashing and remain solid.
7. Operating Instructions
7.1 Training Modes
The ABBIDOT T20 offers three distinct training modes:

Figure 6: Three Training Modes
- Beep Mode: Delivers an audible tone. Often used as a warning or for positive reinforcement.
- Vibration Mode: Delivers a gentle vibration. Effective for dogs sensitive to static shock or as an intermediate correction.
- Static Shock Mode: Delivers a static pulse. Adjustable from level 1 to 16. Use the lowest effective level.
7.2 Adjusting Static Shock Levels
Use the volume button on the remote to adjust the static shock level from 1 (lowest) to 16 (highest). Always start with the lowest level and increase only if necessary, observing your dog's reaction.
7.3 Two-Dog Training
The remote supports training two dogs simultaneously. Use the 'Selecting Channels' switch to toggle between Dog 1 and Dog 2. Ensure each dog has its own paired receiver collar.
7.4 Security Keypad Lock
Activate the security keypad lock to prevent accidental button presses, especially when carrying the remote in your pocket or bag.
7.5 Remote Control Range

Figure 7: Control Range Illustration
The remote control has an extensive range of up to 3000 feet in open spaces. This range may be reduced to approximately 800 feet when obstacles like walls or dense foliage are present. The collar will only function within this range.
7.6 Training Tips
For effective training, consider the following:
- Start with Beep: Begin training with the Beep mode. If your dog does not respond, progress to Vibration, and then to the lowest effective Static Shock level.
- Associate Beep with Correction: When using Vibration or Static Shock, the collar also emits a beep. Over time, your dog will associate the beep with the correction, allowing you to eventually use only the beep mode for training.
- Consistency is Key: Use commands and corrections consistently to help your dog understand desired behaviors.
Video 1: Demonstration of the ABBIDOT T20 E-collar in use for dog training.
8. Maintenance
- Cleaning: Regularly clean the receiver collar and contact points with a damp cloth. Ensure they are dry before use.
- Battery Care: Charge the devices when the low battery indicator appears. Avoid fully depleting the battery frequently to prolong its lifespan.
- Storage: Store the collar and remote in a cool, dry place when not in use.
9. Troubleshooting
- Q: What happens if my dog runs out of the remote's action range?
- A: If your dog moves beyond the remote's effective range (up to 3000ft in open space, less with obstacles), the collar will not receive commands. No stimulation (shock, vibration, or beep) will be delivered outside of this range.
10. User Tips
- Always ensure the collar is properly fitted. A loose collar may not deliver consistent stimulation, while a too-tight collar can cause discomfort or skin issues.
- Begin training in a calm, distraction-free environment before moving to more stimulating locations.
- Use the training collar as a tool to reinforce commands your dog already knows, or to introduce new ones. It's not a substitute for basic obedience training.
- Positive reinforcement (praise, treats) should always accompany corrections to help your dog understand what is expected of them.
- If your dog has sensitive skin, monitor them closely and consider using the vibration or beep modes more frequently than static shock.
11. Warranty and Support
For warranty information or technical support, please contact ABBIDOT customer service. Refer to the product packaging or the official ABBIDOT website for contact details.