HSmartcam IP-E80-36S/M

Contents

HSmartcam 4K 8MP 36X Optical Zoom IP Camera Instruction Manual

Model: IP-E80-36S/M

1. Product Overview

The HSmartcam 4K 8MP 36X Optical Zoom IP Camera is a high-performance surveillance solution designed for clear and detailed monitoring. It features a SONY IMX415 sensor for superior image quality, 36X optical zoom for precise viewing, and compatibility with Hikvision NVRs and ONVIF protocols for seamless integration into existing systems. This camera supports Power over Ethernet (PoE) for simplified installation and H.265 video compression for efficient storage.

Front view of the HSmartcam 4K 8MP IP Camera

Figure 1: Front view of the IP Camera

Rear view of the HSmartcam 4K 8MP IP Camera showing ports

Figure 2: Rear view of the IP Camera with Ethernet and power ports

Key Features:

  • High Resolution: Available in 4K (8MP) with SONY IMX415 sensor or 5MP with SONY335 sensor.
  • Powerful Zoom: 36X optical zoom (4.7-94mm lens) for detailed distant viewing.
  • Advanced Compression: H.265/H.264 video compression for efficient storage and bandwidth usage.
  • PoE Support: Power over Ethernet (IEEE 802.3at) for simplified installation.
  • Hikvision Compatible: Supports Hikvision private protocol and ONVIF for broad compatibility.
  • Smart Features: Motion detection, HDR (High Dynamic Range), 3D DNR (Digital Noise Reduction).
  • Mobile Access: Supports mobile monitoring via AC18Pro (Danale) app for iOS and Android.

Video 1: Product demonstration showcasing zoom capabilities.

2. Setup Guide

2.1 Mobile App Download (AC18Pro)

To access your camera remotely via a mobile device, download the 'AC18Pro' app:

  1. For iOS: Search for "AC18Pro" in the Apple App Store.
  2. For Android: Search for "AC18Pro" in the Google Play Market.
  3. Alternatively, scan the QR code below to directly install the app.
QR code for AC18Pro mobile app download

Figure 3: Scan to download AC18Pro App

Important: For optimal user experience, allow all notification permissions during app installation.

2.2 Connecting Camera to System

The camera can be connected to your surveillance system using either a PoE NVR or a PoE Switch.

2.2.1 Working with PoE NVR

Connect the IP camera directly to the PoE ports on your NVR. This provides both power and data transmission through a single Ethernet cable.

Wiring diagram for IP cameras connected to a PoE NVR, router, PC, and TV

Figure 4: System diagram showing IP cameras connected to a PoE NVR

2.2.2 Working with PoE Switch

If your NVR does not have built-in PoE, or if you are connecting multiple cameras, you can use a separate PoE switch. Connect the camera to the PoE switch, and then connect the PoE switch to your router/NVR.

Wiring diagram for IP camera connected to a PoE switch and NVR

Figure 5: Wiring diagram for IP camera with PoE NVR

Wiring diagram for IP camera connected to a PoE switch

Figure 6: Wiring diagram for IP camera with PoE Switch

Note: If you are not using PoE, the camera requires an OPTIONAL 12V power supply. Ensure your NVR and camera are in the same network segment for proper communication.

3. Operating Instructions

3.1 Initial Access via Browser

For initial setup and configuration, you can access the camera via a web browser on a Windows computer.

  1. Ensure Camera is Online: Verify the camera is connected to your network as described in Section 2.2.
  2. Use IP Search Tool: Download and open an IP search tool (e.g., SADP Tool for Hikvision compatible devices). Click 'Start Search' to find the camera's IP address.
Screenshot of IP search tool showing device list

Figure 7: IP Search Tool (Example: SADP Tool)

Screenshot of SADP Tool showing device list with IP addresses and device types

Figure 8: SADP Tool displaying detected devices

  1. Login via Browser: Open a web browser and enter the camera's IP address. The default username is admin and the default password is 123456.
Screenshot of IP Camera Web Login interface

Figure 9: Web Login Interface

Security Recommendation: It is strongly recommended to change the default password immediately after the first login.

  1. Install Plugin: The first time you view the camera, you may need to install a browser plugin. Follow the on-screen prompts.
  2. View Live Feed: After successful login and plugin installation, you can view the live camera feed.
Screenshot of live camera view in browser at 1x zoom

Figure 10: Live view at 1x zoom

Screenshot of live camera view in browser at 15x zoom

Figure 11: Live view at 15x zoom

Screenshot of live camera view in browser at 30x zoom

Figure 12: Live view at 30x zoom

  1. P2P Settings: Navigate to Configuration > Network > P2P to find the camera's Cloud ID and QR code for mobile app integration.
Screenshot of P2P settings with QR code for mobile app

Figure 13: P2P Settings with QR Code

  1. PTZ Control: Click the PTZ button in the browser interface to access PTZ controls for pan, tilt, and zoom functions.
Screenshot of PTZ configuration interface

Figure 14: PTZ Configuration

3.2 Access via PC Software (iVMS-4200)

The camera is compatible with Hikvision's iVMS-4200 client software.

  1. Install Software: Obtain and install the iVMS-4200 software from your product distributor or Hikvision's official website.
  2. Login: Launch iVMS-4200. The default username is admin and the password is typically empty for the first login.
  3. Device Management: Go to 'Maintenance and Management' > 'Device'.
Screenshot of iVMS-4200 device management interface

Figure 15: iVMS-4200 Device Management

  1. Add Device: Click 'Add' to manually add your camera or use the 'Online Devices' list if it's automatically detected. Enter the camera's IP address, username (admin), and password (123456).
  2. Live View: Once added, select the camera from the device list and click 'Live View' to see the feed.
  3. Remote Configuration: Right-click on the camera in the device list and select 'Remote Config' to access advanced settings like network, video, PTZ, storage, and alarm configurations.
  4. P2P Settings: Within 'Remote Config', navigate to 'Network' > 'P2P' to find the Cloud ID and QR code for mobile app integration.

3.3 PTZ Control Functions

The camera supports various PTZ (Pan-Tilt-Zoom) functions:

  • Speed Setting: Adjust the PTZ movement speed. Typically, preset positions 15 (slowest), 16 (medium), and 17 (fastest) are used.
  • Limit Scan: Automatically rotate between defined left and right boundaries.
  • Automatic Scanning: Automatically rotate across the maximum horizontal angles of the PTZ.
  • Preset Position Function: Set and recall specific camera positions (1-8).
  • Preset Position Cruise: Automatically cycle through a sequence of preset positions.
  • Guard Position Function: If the PTZ is idle for a set period (e.g., 2 minutes), it will automatically return to a predefined guard position.

4. Maintenance

4.1 Factory Reset

To restore the camera to its factory default settings (excluding network configuration and ports):

  1. Access the camera's web interface or iVMS-4200 software.
  2. Navigate to 'System' > 'Factory Reset'.
  3. Select 'Restore to Factory Default settings' and confirm.

Note: This typically restores only pan/tilt rotation functions; video and wireless functions may not be restored. Refer to the specific software interface for details.

4.2 General Care

  • Cleaning: Gently wipe the camera lens and body with a soft, dry cloth. Avoid abrasive cleaners or solvents.
  • Firmware Updates: Periodically check the manufacturer's official website for firmware updates to ensure optimal performance and security.

5. Troubleshooting

  • Cannot Connect to Camera:
    • Verify physical connections (Ethernet cable, power supply).
    • Ensure the camera and viewing device (PC/NVR) are on the same network segment.
    • Use the IP search tool (e.g., SADP Tool) to confirm the camera's IP address.
    • Check firewall settings on your computer or network.
  • Poor Image Quality:
    • Ensure the lens is clean and free from obstructions.
    • Check network bandwidth; insufficient bandwidth can cause choppy video.
    • Verify resolution settings in the camera's configuration.
    • Utilize HDR and 3D DNR features for challenging lighting conditions.
  • PTZ Control Not Responding:
    • Check PTZ protocol settings (e.g., PELCO-D/P) and baud rate in the camera's configuration.
    • Ensure the camera is receiving power.
  • Mobile App Connection Issues:
    • Verify the camera has internet access.
    • Ensure the Cloud ID/QR code is correctly entered/scanned in the app.
    • Restart the camera and try scanning the QR code again within 10 minutes of restart for security reasons.

If you encounter problems that cannot be resolved using this manual, please contact your product distributor or technical support.

6. Specifications

CategoryAttributeValue
ModelIP-E80-36S/M
CameraSensor8.0MP 1/2.8" SSC328Q+SONY IMX415 (4K) / 5MP MSC316DM+1/2.8" SONY335
Minimum IlluminationColor: 0.001Lux, B/W: 0.0001Lux
Image OutputMainstream: 3840*2160@20fps; Sub-stream: 720*480D1/VGA/640*360/CIF@30fps
Lens36X Optical zoom 4.7-94MM
Shutter1/50(1/60)s to 1/10,000s
Noise ReductionSupport 2D/3D
Wide DynamicSupport digital Wide dynamic (HDR)
Electronic ShutterYes
Day Night ModeAuto ICR color to B/W
Video CompressionH.265AI/H.265+ (Compatible with H.265/H.264)
Network & InterfaceNetwork ProtocolHTTP, FTP, SMTP, UPnP, SNMP, DDNS, NTP, RTSP, RTP, TCP, DHCP, PPPoE
InterfaceONVIF, GB/T.28181
APPDanale (AC18Pro)
Connection ProtocolSupport ONVIF 2.4 / Hikvision
Smart FeaturesAI FunctionsMotion Detection, Human Detection, Face Detection
Alarm ActionFTP Photo, Telefon Alarm, Email Photo, Local Alarm
P2PCloud technology for network penetration, in-line and alarm information push
GeneralPower SupplyDC 12V/1A (or PoE 802.3at)
Power Consumption<12W
Operating Temperature-20℃~60℃
Humidity<90%
Shell MaterialMetal
DimensionsCamera Size135mm (L) x 61mm (W) x 50mm (Lens Diameter)
StorageTF CardOptional (for local storage)

Figure 16: Product Specifications

Product size diagram showing 135mm length, 61mm width, 50mm lens diameter

Figure 17: Product Dimensions

Side view of camera showing mounting bracket aperture

Figure 18: Mounting Bracket Aperture (5mm)

7. User Tips

  • Password Security: Always change the default password (123456) immediately after initial setup to prevent unauthorized access.
  • PoE Advantage: Utilize Power over Ethernet (PoE) for a cleaner and simpler installation, as it combines power and data into a single cable.
  • App Compatibility: The recommended mobile app is 'AC18Pro' (also known as Danale) for both Android and iOS devices.
  • NVR Compatibility: This camera is designed to be compatible with Hikvision NVRs and supports the ONVIF protocol, allowing integration with various NVR brands. Ensure your NVR and camera are on the same network segment.
  • Direct TV Connection: The camera typically connects to a TV or monitor via an NVR's HDMI or VGA output, not directly from the camera's AV connection without an NVR.
  • SD Card for Local Storage: If local storage is desired, ensure you install an optional TF (microSD) card.

8. Warranty & Support

For any technical assistance, warranty claims, or if you encounter problems that cannot be resolved using this manual, please contact your product distributor or the technical support team of HSmartcam.

Disclaimer

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

Note: Product features and specifications are subject to change without notice. Please refer to the actual product for the most current information.

© 2023 HSmartcam. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.