ThinkRider Smart Bicycle Tail Rear Light

Contents

ThinkRider Smart Bicycle Tail Rear Light Instruction Manual

Model: Smart Bicycle Tail Rear Light (WT06, WT06R, WT06S)

1. Introduction

Thank you for choosing the ThinkRider Smart Bicycle Tail Rear Light. This device is designed to enhance your cycling safety with advanced features such as intelligent sensing, brake detection, and a durable, waterproof design. This manual provides detailed instructions for proper installation, operation, and maintenance to ensure optimal performance and longevity of your light.

ThinkRider Smart Bicycle Tail Rear Light highlighting features like 120 Lumen brightness, smart brake sensing, LED light, IPX6 waterproof, vibration sensing, durable batteries, and USB charging.
Product overview highlighting key features: 120 Lumen brightness, smart brake sensing, LED light, IPX6 waterproof, vibration sensing, durable batteries, and USB charging.
Detailed view of the ThinkRider Smart Bicycle Tail Rear Light with icons for LED Light, IPX6 Waterproof, Brake Sensing, Vibration Sensing, Durable Batteries, and USB Charging.
Key features of the ThinkRider Smart Bicycle Tail Rear Light.

2. Product Accessories

The package includes the following components:

  • Main body of the bicycle light
  • USB Power cord for charging
  • Fastening strap for installation
Product accessories including the main light body, a USB power cord, and a fastening strap.
Included accessories: Main light body, USB power cord, and fastening strap.

3. Setup and Installation

Follow these steps to properly install your ThinkRider Bicycle Tail Rear Light:

  1. Take out the light and the silicone fastening strap.
  2. Install the light on the seat post of your bicycle. Ensure the thicker side of the silicone strap faces downwards.
  3. Adjust the tightness of the strap to securely fit the light to the seat post.
Demonstration video showing easy installation of the tail light on a bicycle seatpost.
Close-up of a hand installing the tail light on a bicycle seatpost using the silicone strap.
Easy installation of the tail light on a bicycle seatpost.

4. Operating Instructions

4.1 Power On/Off and Mode Switching

  • Power On/Off: Long press the button for 0.5 seconds to turn the light ON or OFF.
  • Switching Modes: After booting, short click the button to cycle through the different light modes: High Steady Light → Medium Steady Light → Slow Flash → Rhythm Flash → ECO Flash.
Image showing the 17pcs High Brightness LED Light Beads and instructions for long press to switch on/off and short press to switch light mode.
Instructions for power and mode switching.

4.2 Smart Mode (WT06S Model Only)

The Smart Tail Light (WT06S) features intelligent light and vibration control:

  • Automatic Wake-up and Hibernation: The light will automatically wake up when motion is detected and enter hibernation after a period of inactivity.
  • Quick Double Click Switch: Use a quick double click to switch between the two smart modes.

Note: The base model (WT06R) does not include smart mode features.

Image illustrating Smart Mode with automatic wake-up and hibernation, and quick double click switch for modes.
Smart Mode features for automatic wake-up, hibernation, and mode switching.

4.3 Brake Sensing (WT06S Model Only)

The Smart Tail Light (WT06S) is equipped with brake sensing technology:

  • When brakes are sensed while the light is powered on, the tail light will switch to high and constant brightness (120LM) for 3 seconds to alert others of deceleration.

Note: The base model (WT06R) does not include a brake sensor.

Image demonstrating the brake sensing feature, where the tail light brightens significantly upon deceleration.
Brake sensing feature for enhanced safety during deceleration.

4.4 Battery Indicator

The light provides real-time battery level indication:

  • Power-on State: The battery indicator flashes every 5 seconds to show the remaining battery level.
  • Shutdown State: Short press the power button to display the remaining battery indicator.
Battery Indicator Status
Indicator ColorRemaining Power
Green80% - 100%
Blue30% - 80%
Red< 30%
Image showing the intuitive power real-time control with green, blue, and red lights indicating battery levels.
Real-time battery indicator lights.

4.5 Light Modes and Run Time

The lights offer various modes with different brightness and battery life:

WT06 Headlight Modes (High Lumen Cycling Headlight)
ModeBrightnessRun Time
High Constant Brightness100LM3H
Medium Constant Light50LM6H
Slow Flashing100LM6H
Rhythmic Flashing100LM6H 30MIN
Energy Saving Fast Flashing30LM23H
Image showing the WT06 high lumen cycling headlight with its five dimmer settings and corresponding battery life.
WT06 Headlight modes and durations.
WT06R Basic Tail Light Modes (High Lumen Cycling Tail Light)
ModeBrightnessRun Time
High Constant Brightness30LM4H
Medium Constant Light15LM8H
Slow Flashing30LM7H 30MIN
Rhythmic Flashing30LM8H
Energy Saving Fast Flashing8LM23H
Image showing the WT06R high lumen cycling tail light with its five dimmer settings and corresponding battery life.
WT06R Basic Tail Light modes and durations.
WT06S Smart Tail Light Modes (High Lumen Cycling Smart Tail Light)
ModeBrightnessRun Time
High Constant Brightness80LM2H 30MIN
Medium Constant Light40LM6H
Slow Flashing80LM5H 30MIN
Rhythmic Flashing80LM5H 30MIN
Energy Saving Fast Flashing20LM25H
Image showing the WT06S high lumen cycling smart tail light with its five dimmer settings and corresponding battery life.
WT06S Smart Tail Light modes and durations.

5. Maintenance

5.1 Charging

To charge your ThinkRider Bicycle Light:

  • Connect the provided USB power cord to the light and a compatible USB power source (e.g., computer, USB wall adapter).
  • During charging, the charging indicator light will be red.
  • Once fully charged, the indicator light will turn green.
  • Charging time is approximately 2 hours with a 5V/0.28A input.
Image showing the light being charged via USB, with a red indicator light for charging and green for full charge.
USB quick charging process.

5.2 Waterproofing

The ThinkRider Bicycle Light features a dust and waterproof design, rated at IPX6, ensuring reliable performance in various weather conditions.

Image showing the light on a wet bicycle, demonstrating its dust and waterproof design.
Dust and waterproof design for all-day escort.

6. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Long press the power button for 0.5 seconds.
  • Short battery life: Check the selected light mode; some modes consume more power. Ensure the device is fully charged (green indicator). If using the WT06R model for long trips, consider charging before each ride.
  • Charging issues: Verify that the USB cable is correctly connected and functional. If the charging cable is faulty or incompatible, try using a different standard USB charging cable.
  • Smart features not working (WT06S only): Ensure the light is powered on and not in a basic mode. Double-click the button to cycle through smart modes.

7. Specifications

General Product Specifications
FeatureDescription
Brand NameThinkRider
Body MaterialAluminum alloy
Power SupplyBattery
Mounting PlacementSeatpost
Waterproof LevelIPX6
Support Dimmer5 - 8 Files (modes)
Intelligent SensingYes (on Smart models)
OriginMainland China
Package Dimensions (L x W x H)15 cm x 8 cm x 5 cm
Package Weight0.07 kg
Model-Specific Parameters
ParameterWT06 (Headlights)WT06R (Basic Tail Light)WT06S (Smart Tail Light)
Brightness30-100LM8-30LM20-120LM
Continuity (Run Time)3-23h4-25h2.5-25h
Battery500mAh400mAh500mAh
Gear (Speeds)5-speed5-speed5-speed
Size33*33*23mm33*33*23mm33*33*23mm
WaterproofIPX6IPX6IPX6
Smart ModeNoneNoneYes
Brake-sensingNoneNoneYes
Table showing product parameters for WT06, WT06R, and WT06S models including brightness, continuity, battery, gear, size, waterproof, smart mode, and brake-sensing.
Detailed product parameters for different models.

8. User Tips

  • Visibility: The light is very bright and powerful, making you highly visible to others, especially the red tail light.
  • Smart Mode Behavior: In smart flashing modes, the light may stop flashing when stationary or braking, indicating its intelligent sensing at work.
  • Battery Life: Users report battery life of 6-7 hours continuously on certain modes. For longer rides, refer to the mode-specific run times and consider charging before each trip.
  • Safety: The strong lighting provides enhanced safety during cycling, especially in low-light conditions.

9. Support

For further assistance or inquiries, please contact ThinkRider support:

  • Manufacturer: Wuxi Thinkrider Technology Co., Ltd.
  • Address: No 109, Gaoyun Road, Huazhuang Street, Binhu District, Wuxi, China
  • Email: service@thinkrider.com
  • Tel: +86 0510-85389225

A detailed user manual in PDF format is also available for download: User Manual (PDF)

© 2024 ThinkRider. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.