Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANNKE C500 Dome 5MP IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety. Keep this manual for future reference.

Figure 1: ANNKE C500 Dome 5MP IP Camera
Safety Information
Read all information and instructions in this document carefully before using the device and keep it for further reference. For more device information and instructions, please visit our website at www.annke.com.
General Safety Guidelines
- Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
- Firmly connect the plug to the power socket. Do not connect several devices to one power adapter.
- Power off the device before connecting and disconnecting accessories and peripherals.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- For the device with the sign indicating hazardous live, the external wiring connected to the terminals requires installation by an instructed person.
- This equipment is not suitable for use in locations where children are likely to be present.
- If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power cable, and contact the service center.
- Use the device in conjunction with an UPS, and use factory recommended HDD if possible.
- For the device with fan blades or motors, keep body parts away from fan blades or motors.
- Disconnect the power source during servicing.
- Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5 minutes, since electricity may still exist after the device is powered off.
- Never place the device in an unstable location. The device may fall, causing serious personal injury or death.
- If the device uses a 3-prong power supply plug, it must be connected to an earthed mains socket-outlet properly.
Battery Warning
WARNING
- INGESTION HAZARD: This product contains a button cell or coin battery.
- DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours.
- KEEP new and used batteries OUT OF REACH OF CHILDREN.
- Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
Additional Battery Warnings:
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
- The preinstalled battery is CR1220, which has a nominal voltage of 3.0V.
- Non-rechargeable batteries are not to be recharged.
- Do not force discharge, recharge, disassemble, heat above (manufacturer's specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.
- Ensure the batteries are installed correctly according to polarity (+ and -).
- Do not mix old and new batteries, different brands or types of batteries, such as alkaline, carbon-zinc, or rechargeable batteries.
- Remove and immediately recycle or dispose of batteries from equipment not used for an extended period of time according to local regulations.
- Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
Product Overview
The ANNKE C500 Dome 5MP IP Camera is a robust surveillance solution designed for both indoor and outdoor use. It features 5MP high-definition video, advanced human and vehicle detection, built-in audio recording, and efficient H.265+ video compression. Its vandal-proof (IK10) and weather-resistant (IP67) design ensures reliable performance in various environments.
Key Features:
- High Definition: 5 MP (2560 x 1920) resolution for clear images.
- Lens: 2.8mm fixed lens for a wide viewing angle (70°).
- Night Vision: Up to 100ft/30m night vision with EXIR 2.0 and Smart IR. Supports Color Night Vision with external lights.
- AI Functions: Motion Detection 2.0 with Human & Vehicle Detection to reduce false alerts.
- Audio: Built-in microphone for Hi-Fi audio recording.
- Video Compression: H.265+ technology for efficient storage and bandwidth usage (saves up to 75% storage).
- Durability: IP67 dust and waterproof rating, IK10 vandal-proof.
- Connectivity: IP/Network Wired, supports PoE (802.3af) and DC 12V power supply.
- Storage: Built-in microSD/SDHC/SDXC slot, supports up to 256 GB.
- Wide Dynamic Range: 120DB WDR for clear images in challenging lighting conditions.
- Image Sensor: 1/3'' Progressive Scan CMOS.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | ANNKE |
| Model Number | I51DN-C500 |
| High Definition | 5.0 Megapixels (2560 x 1920) |
| Lens (mm) | 2.8mm |
| Viewing Angle | 70° |
| Connectivity | IP/Network Wired |
| Power Supply(V) | DC 12 V; PoE (802.3af) |
| Video Compression Format | H.265 |
| AI Functions | Motion Detection (Human & Vehicle Detection) |
| Audio Input | Built-in Microphone |
| Night Vision Distance | Up to 100ft/30m |
| Color Night Vision | Other (with external lights) |
| IP Rating | IP67 |
| Special Features | Vandal-proof (IK10) |
| Storage | Up to 256 GB (microSD/SDHC/SDXC Slot) |
| Image Sensor | 1/3'' Progressive Scan CMOS |
| Wide Dynamic Range | 120DB WDR |
| IR Cut Filter | Yes |
| Housing Material | Metal & Plastic |
| Installation | Ceiling |
| Supported Operating Systems | Windows 7, Windows 8, Windows 10 |
| Dimension (L X W X H) | 4.72" x 3.63" |
| Package Weight | 0.68 kg |
| Package Dimensions | 20cm x 20cm x 20cm |
Setup
1. Unpacking and Inspection
Carefully unpack the camera and all accessories. Ensure all components are present and undamaged. If any items are missing or damaged, contact customer support immediately.
2. Powering the Camera
The ANNKE C500 camera supports two power options:
- Power over Ethernet (PoE): Connect the camera to a PoE-enabled NVR or PoE switch using an Ethernet cable. This provides both power and data connectivity through a single cable.
- DC 12V Power Adapter: If not using PoE, connect a DC 12V power adapter (not included) to the camera's power input port. Then, connect an Ethernet cable for data transmission.

Figure 2: Powering options (PoE and DC 12V) and NVR compatibility
3. Network Connection
Connect the camera to your network using an Ethernet cable. The camera supports Open Network Video Interface Protocol (ONVIF) for compatibility with ANNKE NVRs and various third-party NVRs.
4. Waterproofing the Tail Cable
While the IP camera itself is IP67 waterproof, the connecting tail cable is not. It is crucial to waterproof the tail cable connections properly to prevent water ingress, especially for outdoor installations. Use waterproof connectors or electrical tape to seal all exposed connections.
5. Mounting the Camera
The camera is designed for ceiling installation. Securely mount the camera using appropriate screws and anchors for your chosen surface. Ensure the camera is positioned to cover the desired surveillance area.
Operation
1. Initial Access and Configuration
Refer to your NVR or surveillance software manual for initial setup, including finding the camera on the network, setting up passwords, and configuring basic video settings. The camera supports Windows 7, 8, and 10 operating systems for management software.
2. Video Recording and Compression
The camera utilizes H.265+ video compression, which significantly reduces bandwidth and storage requirements compared to older H.264 formats. This allows for longer recording times and more efficient data management.

Figure 3: H.265+ Compression Efficiency
3. Smart Detection Features
The camera's AI functions include Motion Detection 2.0 with advanced Human & Vehicle Detection. This technology helps to significantly reduce false alerts caused by irrelevant movements like animals or swaying branches, providing more accurate notifications.

Figure 4: Human & Vehicle Detection in action
4. Audio Recording
With a built-in microphone, the camera can capture Hi-Fi audio alongside video footage, providing a more comprehensive surveillance record.

Figure 5: Built-in Audio Recording
5. Night Vision Modes
The camera offers two night vision modes:
- EXIR 2.0 Night Vision with Smart IR: Provides clear black and white images in complete darkness up to 100ft/30m.
- Color Night Vision: When external lights are present, the camera can capture full-color images at night.

Figure 6: Night Vision Comparison
6. Alarm Actions
The camera can be configured to trigger various alarm actions upon detection, including FTP Photo upload, telefon Alarm, Email Photo, and Local Alarm.
7. Remote Access
Access your camera feed and recordings remotely via various devices using the ANNKE app or compatible client software.
Maintenance
1. Cleaning
- Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality.
- For stubborn dirt, use a lens cleaning solution specifically designed for optical surfaces.
- Do not use harsh chemicals or abrasive cleaners, as they may damage the camera's finish or lens coating.
2. Firmware Updates
Periodically check the ANNKE official website (www.annke.com) for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security, and access to new features.
3. Storage Management
If using a microSD card for local storage, regularly review and manage recorded footage. The H.265+ compression helps maximize storage, but periodic checks are recommended to ensure sufficient space.
4. Hardware Reset
The camera supports a hardware reset function. If you encounter persistent issues, a hardware reset may help resolve them. Refer to the detailed user manual (PDF) for instructions on performing a hardware reset.
Troubleshooting
If you encounter problems with your ANNKE C500 camera, please refer to the following common issues and solutions. For more detailed troubleshooting, consult the full user manual (PDF).
Common Issues:
- No Image/Video:
- Check power supply (DC 12V or PoE) and network cable connections.
- Ensure the camera is properly connected to the NVR or network.
- Verify network settings and IP address.
- Poor Image Quality:
- Clean the camera lens.
- Check network bandwidth and ensure it's sufficient for 5MP video.
- Adjust video settings (resolution, bitrate) in the camera's interface.
- False Motion Alerts:
- Adjust motion detection sensitivity settings.
- Utilize Human & Vehicle Detection features to filter out irrelevant movements.
- Ensure the detection area is properly configured.
- No Audio:
- Verify the built-in microphone is enabled in the camera settings.
- Check audio output settings on your viewing device or NVR.
- Remote Access Issues:
- Ensure the camera has internet access.
- Verify port forwarding settings on your router if required.
- Check firewall settings on your network.
For comprehensive troubleshooting guides and advanced configurations, please download the official user manual PDF: ANNKE C500 User Manual (PDF)
User Tips
- Waterproofing Cables: Always ensure the camera's tail cable connections are thoroughly waterproofed, especially for outdoor installations, as the cable itself is not waterproof.
- Optimal Night Vision: For best color night vision results, ensure there is sufficient ambient light or external lighting in the surveillance area.
- Power Planning: When installing, consider using Power over Ethernet (PoE) for simplified wiring, as it delivers both power and data through a single cable.
- False Alert Reduction: Leverage the Human & Vehicle Detection feature to minimize unnecessary notifications and focus on relevant events.
- Storage Optimization: Utilize the H.265+ video compression to maximize your microSD card storage capacity and reduce bandwidth usage.
Regulatory Compliance
FCC Compliance Statement
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EU/UK Compliance Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, the LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU.
This product and - if applicable - the supplied accessories too are marked with "UKCA" and comply therefore with the following directives: Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
WEEE Directive (2012/19/EU): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Battery Directive (2006/66/EC and amendment 2013/56/EU): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see: www.recyclethis.info.
Disclaimer: Camera products can only be used for the purposes permissible under the applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
Support
For any product-related questions or technical assistance, please contact ANNKE customer support through the following methods:
- Technical Support Email: support@annke.com
- Technical Support Website: help.annke.com
- Live Chat Support: A professional technical support team is available via live chat at ANNKE Live Chat