staniot K010

Contents

Staniot K010 Wireless Touch Keypad Instruction Manual

Model: K010 | Brand: staniot

1. Introduction

Thank you for choosing the Staniot K010 Wireless Touch Keypad. This device is designed to enhance your home security by providing a convenient way to arm and disarm your Tuya Smart Home Security Alarm System using a password or RFID card. It features a sleek design, easy installation, and reliable wireless communication.

Staniot Wireless Keyboard with RFID cards, highlighting Doorbell mode and Easy installation.

Figure 1: Staniot Wireless Keypad with RFID cards

2. Safety Information

  • Do not expose the device to extreme temperatures, humidity, or direct sunlight.
  • Keep the device away from water and other liquids.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Use only the specified power adapter (DC5V 1.0A, Micro USB) for charging.

3. Package Contents

  • 1 x Staniot K010 Wireless Touch Keypad (Black)
  • 2 x RFID Cards
  • 1 x Micro USB Cable (for power/charging)
  • 1 x User Manual (this document)
  • Mounting hardware (screws, anchors)

4. Product Overview

The Staniot K010 Wireless Touch Keypad features a clear layout for intuitive operation. Familiarize yourself with the components and indicators:

Product Details diagram, showing RFID Tag Reader Zone, Power/Ready Indicator, Away/Stay Arm Indicator, Disarming Indicator, Setting Indicator, Away Arm, Disarm, Stay Arm, and Doorbell buttons.

Figure 2: Keypad Layout and Indicators

  • RFID Tag Reader Zone: Area to swipe RFID cards for arming/disarming.
  • Power/Ready Indicator: Shows power status and system readiness.
  • Away/Stay Arm Indicator: Indicates the current arming mode.
  • Disarming Indicator: Lights up when the system is disarmed.
  • Setting Indicator: Lights up during configuration.
  • Away Arm Button: Arms the system for when you are away.
  • Disarm Button: Disarms the system.
  • Stay Arm Button: Arms the system for when you are home.
  • Doorbell Button: Activates the doorbell function.
Keypad features: Swipe RFID Card, Password, Touch Screen, Button Backlight, Anti-interference, Unattended, External Doorbell.

Figure 3: Keypad Features

5. Specifications

FeatureSpecification
Model NumberK010
Input PowerDC5V 1.0A, Micro USB
Built-in Battery3.7V 500mAh lithium battery
Emission Current≤ 15mA
Fully Charged Voltage4.15V
RFID Protocol125KHz, 4100/4200
RFID Card CapacityUp to 10 cards can be equipped
Wireless Frequency433MHz, eV1527
Operation Temperature-10~55℃
Dimensions (W x H x D)87.7mm x 137.6mm x 17.1mm
Smart Home PlatformTuya
Dimensions of the keypad (87.7mm x 137.6mm x 17.1mm) and a table of specifications.

Figure 4: Keypad Dimensions and Specifications

6. Setup

6.1 Physical Installation

The keypad is designed for easy installation and features an elegant design suitable for various environments.

Keypad installed on a door, showing 'Easy to install' and 'Elegant Design'.

Figure 5: Example Installation

  1. Choose a suitable location near your entry point, ensuring good wireless signal to your alarm host.
  2. Use the provided mounting hardware to securely attach the keypad to a wall or door frame.
  3. Ensure the keypad is within easy reach for daily operation.

6.2 Pairing with Alarm Host

The K010 Wireless Keypad connects to your 433MHz EV1527 compatible alarm host. Follow these steps to pair the keypad:

  1. On your alarm host, navigate to the 'Accessory' or 'Keypad' pairing menu. (Refer to your alarm host's manual for specific instructions).
  2. Select the option to add a new keypad. The alarm host will typically prompt you to 'trigger the accessory'.
  3. On the K010 keypad, enter a dummy code (e.g., '123') and press the 'Arm' or 'Disarm' button to send a signal.
  4. The alarm host should detect the keypad and confirm successful pairing.

Video 1: Demonstration of Keypad Pairing and Operation

6.3 Adding RFID Cards

The keypad supports up to 10 RFID cards for convenient arming and disarming.

Image showing how to add an RFID card to the keypad, emphasizing ease of use for arming/disarming.

Figure 6: Adding an RFID Card

  1. On your alarm host, enter the RFID card management menu.
  2. Select the option to 'Add RFID Card'. The alarm host will prompt you to swipe the card.
  3. Gently swipe an RFID card over the RFID Tag Reader Zone on the K010 keypad.
  4. The alarm host should register the card. Repeat for additional cards.

7. Operating Instructions

The K010 keypad allows for arming and disarming your security system using either a password or an RFID card.

7.1 Arming/Disarming with Password

  1. To Arm (Away Mode): Enter your user code (e.g., '1234') and press the 'Away Arm' button. The system will initiate an exit delay countdown.
  2. To Arm (Stay Mode): Enter your user code and press the 'Stay Arm' button. This arms perimeter sensors while allowing movement inside.
  3. To Disarm: Enter your user code and press the 'Disarm' button. The system will disarm.

7.2 Arming/Disarming with RFID Card

For quick and convenient operation, use your registered RFID card.

Close-up of the keypad with an RFID card, reiterating 'Add RFID Card, Easy to operate and carry'.

Figure 7: Arming/Disarming with RFID Card

  1. To Arm (Away Mode): Swipe a registered RFID card over the RFID Tag Reader Zone. The system will arm in Away mode.
  2. To Disarm: Swipe a registered RFID card over the RFID Tag Reader Zone. The system will disarm.

7.3 Doorbell Function

Press the 'Doorbell' button to activate the doorbell function, if configured with your alarm host.

8. Maintenance

8.1 Battery Charging

The keypad has a built-in 3.7V 500mAh lithium battery. When the battery indicator shows low power, connect the keypad to a DC5V 1.0A Micro USB power source for charging. A full charge typically reaches 4.15V.

8.2 Cleaning

Wipe the touch screen and keypad surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.

9. Troubleshooting

  • Keypad not responding: Check battery level and charge if necessary. Ensure the keypad is within range of the alarm host.
  • Pairing issues: Verify your alarm host is compatible with 433MHz EV1527 accessories. Ensure the keypad is in pairing mode on the alarm host before triggering.
  • RFID card not working: Ensure the RFID card has been properly added to the alarm host. Swipe the card directly over the RFID Tag Reader Zone.
  • Poor wireless communication: Ensure there are no major obstructions (thick walls, large metal objects) between the keypad and the alarm host. The keypad offers strong anti-interference capabilities, but extreme distances (e.g., 70 meters with multiple walls) might affect performance.

10. User Tips

  • Power Options: While the keypad has a built-in battery, for continuous operation and to avoid frequent charging, consider connecting it to a permanent DC5V Micro USB power source.
  • Battery Life: The battery life can vary based on usage. If you experience shorter battery life than expected, ensure it's fully charged and consider the power connection tip above.
  • Compatibility: This keypad is designed to work with 433MHz EV1527 compatible alarm hosts, particularly Tuya Smart Home systems. Compatibility with other 433MHz brands is not guaranteed and should be verified with the other brand's specifications.
  • Multiple Keypads: It is possible to install multiple keypads for different entry points, provided your alarm host supports additional accessories.

11. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact Staniot customer service directly. Keep your purchase receipt for any warranty claims.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.