FD ZG-2002 / ZG-2002-RF

Contents

eWeLink WiFi 2 Channel Relay Smart Switch User Manual

Model: ZG-2002 / ZG-2002-RF | Brand: FD

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your eWeLink WiFi 2 Channel Relay Smart Switch. This device allows you to remotely control two independent electrical circuits via the eWeLink mobile application, voice commands through smart assistants like Google Home and Amazon Alexa, and for certain models, via RF433MHz remote controls. It supports multiple working modes including Inching, Self-locking, and Interlock, offering versatile control for various applications.

2. Safety Information

  • Always ensure the power supply is disconnected before performing any wiring or maintenance.
  • Installation should be performed by a qualified electrician or a person with sufficient knowledge of electrical systems.
  • Do not exceed the maximum current rating of 10A per channel or the total power rating of 2200W.
  • Ensure proper insulation for all connections to prevent short circuits.
  • Keep the device away from water, moisture, and extreme temperatures.
  • The device operates on either DC 7-32V or AC 85-250V, depending on the model. Verify your model's voltage requirements before connecting.

3. Package Contents

Please check the package for the following items:

  • eWeLink WiFi 2 Channel Relay Smart Switch Module
  • User Manual (this document)
  • For RF433MHz models: Remote control (with 23A 12V battery included)

4. Product Overview

The eWeLink WiFi 2 Channel Relay Smart Switch is a compact module designed for smart home integration. It features two independent relay channels for controlling different appliances or lights.

4.1. Device Layout

Front and back view of the eWeLink WiFi 2 Channel Relay Smart Switch module.
Figure 1: Front and back view of the smart switch module.
Detailed labeled diagram of the smart switch module showing input/output terminals, buttons, and indicators.
Figure 2: Labeled diagram of the smart switch module.

Key Components:

  • Input Terminals (L, N or DC+/-): For connecting the main power supply (AC 85-250V or DC 7-32V).
  • Input USB 5V: Alternative power input for DC models.
  • Output Terminals (NC, COM, NO): Two sets of Normally Closed (NC), Common (COM), and Normally Open (NO) contacts for connecting controlled devices.
  • Manual Switch Buttons (R1, R2): For local control of each channel and for pairing/resetting.
  • Network Indicator (Red light): Indicates network status.
  • RF Pairing Indicator (Blue light): For RF433MHz models, indicates RF pairing status.

5. Specifications

FeatureSpecification
Brand NameFD
Communication MethodWi-Fi (2.4GHz, IEEE 802.11 b/g/n)
Control Channels2CH Relay Smart Switch
Power SupplyDC 7-32V / AC 85-250V (optional) / USB 5V
Max. Current≤ 10A per channel (2200W/10A/Gang)
Working ModesInching, Interlock, Self-locking
AppeWeLink
CompatibilityAll Compatible (Google Home, Amazon Alexa, IFTTT)
Working Temperature-20°C to 70°C
Working Humidity40% to 80% RH
CertificationCE, RoHS
Size116*38*25mm
Camera EquippedNo
State of AssemblyAlmost Ready

6. Setup

6.1. Pre-installation Checklist

  • Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
  • Have your Wi-Fi network name (SSID) and password ready.
  • Download the eWeLink app from your smartphone's app store.
  • For RF433MHz models, ensure your remote control has a 23A 12V battery installed.

6.2. Wiring Diagram

Connect your smart switch according to the appropriate diagram for your power supply (DC or AC) and the device you wish to control. Always ensure power is off before wiring.

Wiring diagram for the smart switch, showing connections for AC input and relay outputs.
Figure 3: Example wiring for AC 85-250V input and relay outputs.

Terminal Descriptions:

  • L / N (AC models) or +/- (DC models): Power input for the module.
  • USB 5V: Alternative power input for DC models.
  • NC (Normally Closed): This contact is closed when the relay is off and opens when the relay is on.
  • COM (Common): This is the common terminal for the relay.
  • NO (Normally Open): This contact is open when the relay is off and closes when the relay is on.

Follow these steps to pair your smart switch with the eWeLink app:

  1. After wiring, power on the device. Confirm that the device's network indicator (red light) is flashing. If it's not flashing, press and hold either the R1 or R2 manual switch button for 3-7 seconds until the red light flashes twice and stops for 1 second.
  2. Open the eWeLink app on your smartphone.
  3. From the app's home screen, select 'Quick Pairing' or tap the '+' icon to add a new device.
  4. Enter your 2.4GHz Wi-Fi network name and password when prompted.
  5. Wait for the app to find and connect to the device. This may take about 1 minute.
  6. Once successfully added, you can name your device and control it remotely via the app.
Video 1: Demonstration of pairing the smart switch with a smartphone using the eWeLink app.

7. Operating Modes

The smart switch supports three main working modes:

Diagram illustrating the three working modes: Inching, Self-locking, Interlock.
Figure 4: Visual representation of Inching, Self-locking, and Interlock modes.

7.1. Inching Mode

In this mode, when a channel is switched ON, it will automatically switch OFF after a preset duration (e.g., 0.7 seconds). This is useful for momentary actions like opening a gate or triggering a pulse.

7.2. Self-locking Mode

Similar to a normal 2-channel switch, each channel can be switched ON or OFF independently and will remain in that state until changed. This is suitable for controlling lights or other devices that need to stay on or off.

7.3. Interlock Mode

In Interlock mode, only one channel can be ON at a time. If you switch one channel ON, any other currently ON channel will automatically switch OFF. This is ideal for controlling devices where simultaneous operation is not desired, such as motor direction control.

7.4. Setting Inching Mode via App

To set the inching duration:

  1. Ensure the device is in Self-locking mode (press the mode button twice if needed).
  2. Open the eWeLink app and navigate to the device's settings interface.
  3. Find the 'Inching' setting and enable it.
  4. Set the desired inching duration. The duration takes integral multiples of 0.5 seconds (0.5-3600s).

Note: Once inching mode is set via the app, the physical mode button on the device will become invalid for changing this setting. The inching mode must be turned off in the app for the device's mode button to be reactivated for mode changes.

7.5. Remote Control Pairing (RF433MHz Models Only)

For models with RF433MHz functionality, you can pair a remote control:

Matching:

  1. Hold either manual switch button (R1 or R2) for 3 seconds until the RF pairing indicator (blue light) turns ON.
  2. While the blue light is ON, long press the desired button on your RF remote control.
  3. Release the remote control button once pairing is successful.

Clear Code:

  1. Long press either manual switch button (R1 or R2) for 15 seconds (ensure the RF pairing indicator is always ON).
  2. Release the manual switch button once the RF pairing indicator turns OFF. This clears all paired RF remote controls.

Note: RF matching/clear code methods are only available with RF function switch/module references.

7.6. Scheduling and Timers

The eWeLink app allows you to set up various schedules and timers:

  • Scheduled Timers: Set specific times for the device to turn ON or OFF.
  • Countdown Timers: Set a countdown after which the device will change its state.
  • Loop Timers: Schedule repetitive ON/OFF cycles.

The device supports a maximum of 8 enabled scheduled/countdown/loop timers for each channel.

Screenshot of the eWeLink app showing how to set a schedule to open and close curtains.
Figure 5: Example of setting a schedule in the eWeLink app.

7.7. Voice Control

The smart switch is compatible with popular voice assistants:

  • Amazon Alexa: Connect your eWeLink account to Alexa through the Alexa app.
  • Google Home: Connect your eWeLink account to Google Home through the Google Home app.

Once linked, you can use voice commands to turn devices ON/OFF, for example, "Alexa, turn on the light" or "Hey Google, turn off the fan."

Image showing Amazon Alexa device being used to control a light connected to the smart switch.
Figure 6: Voice control with Amazon Alexa.

7.8. Device Sharing

You can share control of your smart switch with family members or colleagues through the eWeLink app. This allows multiple users to manage the connected devices.

Diagram illustrating the device sharing function within the eWeLink app.
Figure 7: Device sharing function.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Firmware Updates: Periodically check the eWeLink app for available firmware updates to ensure optimal performance and security.
  • Environmental Conditions: Ensure the device operates within the specified working temperature (-20°C to 70°C) and humidity (40% to 80% RH) ranges.

9. Troubleshooting

9.1. Device Not Pairing / Offline

  • Check Wi-Fi: Ensure your Wi-Fi network is 2.4GHz and stable. The device does not support 5GHz Wi-Fi.
  • Reset Device: If the network indicator is not flashing, press and hold either manual switch button (R1 or R2) for 15 seconds to reset the device. Then attempt pairing again.
  • Router Proximity: Try to keep the device close to your Wi-Fi router during the pairing process.
  • App Troubleshooting: In the eWeLink app, go to the homepage, click the icon in the lower right corner, and navigate to "Message" > "Guide" or "Profile" > "eWeLink support" for further assistance.
  • Personal Hotspot: If issues persist, try pairing using a personal hotspot from another phone to rule out router-specific problems.

9.2. Remote Control (RF433MHz) Not Responding

  • Battery Check: Ensure the remote control battery (23A 12V) is not depleted and is inserted correctly.
  • Re-pair Remote: Follow the "Remote Control Pairing" instructions in Section 7.5 to re-pair the remote control with the smart switch.
  • Clear Codes: If multiple remotes are causing interference, try clearing all codes and re-pairing only the necessary ones.

10. User Tips

  • Label Your Devices: Once paired, give your smart switch and its channels descriptive names in the eWeLink app (e.g., "Living Room Light," "Bedroom Fan") for easier control and voice commands.
  • Automate with Scenes: Utilize the eWeLink app's scene function to create automated routines. For example, a "Good Morning" scene could turn on your coffee maker and bedroom light simultaneously.
  • Check Wiring Regularly: Periodically inspect wiring connections to ensure they remain secure, especially in high-vibration environments.
  • Backup Settings: While not always explicitly available, keeping a record of complex schedules or automation rules can be helpful for quick re-setup if needed.

11. Warranty and Support

This product typically comes with a 1-year warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

For additional item guides and documents, please refer to the official product page or the provided PDF manual: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.