Navceker ZY-HS402

Contents

Navceker 4x2 4K HDMI Switch Audio Extractor ARC & Optical Toslink User Manual

Model: ZY-HS402

1. Introduction

The Navceker ZY-HS402 is a 4x2 HDMI 2.0b switch splitter designed to connect up to four HDMI signal sources to two HD display terminals. It can easily split the four HD signals to two HD displays or projectors. Additionally, when connected to an HDMI output cable, it amplifies the HDMI signal. The two signal sources can be switched freely. This device supports all HD multichannel audio formats, including 720p, 1080i, 1080p, 2160p@30Hz, and 2160p@60Hz. It also features 3.5mm audio output and SPDIF audio output. Please note that this product does not support automatic switching for all functions.

This HDMI switch is an ideal solution for home theater, office, school, conference room, shopping mall, hotel, or museum setups, enhancing your experience with high-resolution video and audio.

2. Package Contents

Please verify that all items are present in the package:

  • 1x Navceker 4K HDMI Switch/Splitter (ZY-HS402)
  • 1x IR Remote Control (Battery not included)
  • 1x 5V/2A Power Adapter
  • 1x User Manual
Package contents of the Navceker HDMI Switch, including the switch unit, remote, power adapter, and manual.
Figure 1: Package Contents

3. Product Overview

The Navceker ZY-HS402 features multiple input and output ports for versatile connectivity. Below are diagrams illustrating the front and back panels, along with the remote control functions.

Navceker 4x2 HDMI Switch with remote control, showing the device's top and front views.
Figure 2: Navceker HDMI Switch and Remote Control
Detailed view of the front and back panels of the HDMI switch, labeling all ports and indicators, along with the remote control functions.
Figure 3: Front and Back Panel Layout with Remote Functions

Front Panel Features:

  • 3.5mm Audio Output
  • L/R Audio Output
  • Pass/2.0/5.1 Audio Mode Switch
  • ARC On/Off Switch
  • IR Signal Receiving Port
  • Input Signal Indicators (1-4)
  • Switch Input Signal Button

Back Panel Features:

  • HDMI Inputs (IN1, IN2, IN3, IN4)
  • HDMI Outputs (OUT, OUT ARC)
  • Coaxial Audio Output
  • SPDIF (Optical) Audio Output
  • DC 5V Power Input

Remote Control Functions:

  • ON / OFF
  • HDMI 1, HDMI 2, HDMI 3, HDMI 4 (Input Selection)
  • ARC ON / OFF
  • AUDIO COPY ON / OFF
  • 2CH ON / OFF (for 2.0CH Audio Mode)
  • 5.1CH ON / OFF (for 5.1CH Audio Mode)

4. Setup Instructions

Follow these steps to connect your Navceker HDMI Switch:

  1. Connect HDMI Source Devices: Use HDMI cables to connect your HDMI source devices (e.g., Fire TV, Xbox, PS4, IPTV-STB, DVD Player, Laptop) to the HDMI input ports (IN1, IN2, IN3, IN4) on the switch.
  2. Connect Display Devices: Use HDMI cables to connect your display devices (e.g., TV, Projector) to the HDMI output ports (OUT, OUT ARC) on the switch.
  3. Connect Audio Output (Optional): If you wish to extract audio, connect your sound system (soundbar, speaker, home theater, A/V receiver, headphones) to the appropriate audio output ports (3.5mm, L/R RCA, Coaxial, SPDIF Optical) on the switch.
  4. Connect Power Adapter: Connect the provided 5V/2A power adapter to the DC 5V input port on the HDMI switch, then plug it into a power outlet.
Connection diagram illustrating various input devices connected to the HDMI switch and output to TV, laptop, projector, home theater, speaker, and headphones.
Figure 4: Typical Connection Diagram

Note for Set-Top Boxes:

  • When using a set-top box, it is recommended to set its audio mode to "Best Available" for optimal compatibility.

5. Operating Instructions

5.1 Switching Input Sources

The HDMI switch offers two methods for changing input sources:

  • Manual Switching: Press the 'Switch' button on the front panel of the device to cycle through the HDMI input sources (IN1, IN2, IN3, IN4).
  • Remote Control Switching: Use the 'HDMI 1', 'HDMI 2', 'HDMI 3', or 'HDMI 4' buttons on the IR remote control to directly select the desired input source.
Image showing two switch modes: manual button press on the device and remote control operation.
Figure 5: Two Switch Modes

Warm Tip for Remote Control:

  • Maximum remote control distance is 8 meters. For better control, point the remote at the IR light of the switch. Press and hold for 2 seconds each time before the next press. The display may black out for about 5 seconds when changing sources; this is normal.

5.2 ARC (Audio Return Channel) Function

The ARC function allows audio from your TV to be sent back to your sound system through the HDMI cable, eliminating the need for a separate audio cable.

How to Use ARC Function:

  1. Connect your TV's HDMI (ARC) Port to the switch's HDMI Output Port (OUT ARC) using an HDMI cable.
  2. Connect your soundbar, speaker, home theater, or A/V receiver to the switch using an optical or coaxial cable.
  3. Ensure the ARC function is enabled on both your TV and the HDMI switch (using the ARC On/Off switch on the front panel or remote).
  4. Set the Audio Mode on the switch to "TV Mode" when using ARC.
Diagram showing how to connect the HDMI switch for ARC functionality, including optical and coaxial audio outputs.
Figure 6: ARC Function Diagram

Important Notes for ARC:

  • When ARC is active, your TV remote may not control the volume. You will need to adjust the volume directly on your speaker/soundbar/home theater system.
  • The HDMI ARC output port of the product must be connected to the HDMI ARC input port of your display device (TV, projector). Ensure ARC is successfully turned on.
  • If there is no sound from the display device after normal connection, or if the remote control cannot adjust the sound level, verify ARC settings.
  • ARC must be set to TV Mode before the audio channel is turned on.

5.3 Audio Mode Settings

The switch provides three audio output modes, selectable via the front panel switch or remote control:

Front panel view of the switch with indicators for audio mode settings (Pass, 2.0CH, 5.1CH).
Figure 7: Audio Mode Settings
  1. Pass Mode: The output audio format depends on the HDMI input signal. The audio is copied directly to the HDMI output device.
  2. 2.0CH Mode: Set to 2CH to obtain analog stereo. This mode extracts the digital 2CH PCM stereo audio signal from the HDMI input and converts it to 2CH analog stereo output through its RCA L/R analog, Optical SPDIF, or Coaxial output simultaneously.
  3. 5.1CH Mode: Set to 5.1CH to obtain 5.1 digital surround sound. The HDMI input source must support 5.1CH. This audio can be extracted via Optical SPDIF and Coaxial output. It supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio.

5.4 Splitter Mode

The device operates in splitter mode, sending the selected input signal to both HDMI outputs simultaneously.

Visual explanation of splitter mode (4 inputs to 2 identical outputs) and matrix mode (crossed out, indicating not supported).
Figure 8: Splitter Mode (Matrix Mode Not Supported)

5.5 HDTV/DVI/VGA Display Output Considerations

If you are using an HDTV, DVI, or VGA display output, please follow these steps:

  • Connect the HDMI cable to the HDTV first.
  • Set the resolution of the signal source to 1080p.
  • Finally, connect the HDMI cable to the VGA or DVI Display.
  • If you connect HDTV/DVI/VGA displays at the same time, the VGA and DVI displays will output at 720p, not 1080p.

5.6 Product Demonstration Video

Watch this video for a visual guide on connecting and operating the HDMI switch:

Video: Navceker HDMI Switcher with ARC Demonstration

6. Maintenance

To ensure the longevity and optimal performance of your Navceker HDMI Switch, please follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using liquid cleaners or aerosol sprays, which may damage the unit.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
  • Power: Always use the provided 5V/2A power adapter. Using an incorrect power adapter may damage the device.
  • Cables: Ensure all HDMI cables are securely connected. Loose connections can lead to signal loss or intermittent issues. Use high-quality AWG26 HDMI standard cables for optimal performance.

7. Troubleshooting

If you encounter issues with your HDMI switch, please refer to the following common problems and solutions:

Problem Possible Cause / Solution
No video output / Black screen
  • Check all HDMI cable connections. Ensure they are secure.
  • Verify the power adapter is correctly connected and the device is powered on.
  • Ensure the correct input source is selected on the switch.
  • Try a different HDMI cable.
  • If using 4K, ensure your cables and display support 4K resolution.
  • Perform an automatic reset (see below).
No audio output
  • Check audio cable connections to your sound system.
  • Verify the audio mode setting (Pass, 2.0CH, 5.1CH) on the switch is appropriate for your setup.
  • If using ARC, ensure ARC is enabled on both the TV and the switch, and the switch's audio mode is set to "TV Mode".
  • Ensure your HDMI input source supports the selected audio format (e.g., 5.1CH for 5.1 digital surround).
  • Adjust volume on your sound system, as the TV remote may not control it when ARC is active.
Remote control not working
  • Ensure there are fresh batteries in the remote control.
  • Point the remote directly at the IR receiver on the front panel of the switch.
  • Ensure there are no obstructions between the remote and the switch.
Display blacks out for 5 seconds when switching sources
  • This is normal behavior during source switching.
VGA/DVI output is 720p instead of 1080p
  • When HDTV/DVI/VGA displays are connected simultaneously, DVI and VGA outputs will be limited to 720p. This is a design limitation.

Automatic Reset Function

To reset the product, press and hold the 'Switch' button on the front panel for more than 5 seconds. All LEDs will flash once, indicating the product has reset.

8. Specifications

Feature Description
HDMI Version HDMI 2.0b
HDMI Resolution Up to 3840x2160/60Hz
Video Color Format 8/10/12 bit deep color
Audio Format Support DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD, LPCM/DTS/Dolby-AC3
Max Bandwidth 600MHz / 340MHz
Max Baud Rate 18.5Gbps / 6Gbps
Input Cable Distance 4K: ≤10m, 1080p: ≤20m (AWG26 HDMI standard cable)
Output Cable Distance 4K: ≤10m, 1080p: ≤20m (AWG26 HDMI standard cable)
Max Working Current 500mA
Power Adapter Input: AC (50HZ,60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature -15°C to +55°C
Dimensions (LxWxH) 170 x 58 x 25 mm
Weight 200g
HDCP Support 1.1/1.2/1.3/1.4/2.2
Special Features Downscaling (4K to 1080p simultaneously), 4K/60Hz RGB: 8:8:8

9. User Tips

Here are some tips to enhance your experience with the Navceker HDMI Switch:

  • Audio Quality: If you are concerned about specific audio qualities (e.g., 192 KHz), ensure your source device, HDMI cables, and connected audio system all support the desired specifications. The switch supports various formats like LPCM, Dolby TrueHD, and DTS-HD Master Audio, but the entire chain must be compatible.
  • Cable Length: For optimal performance, especially with 4K resolution, use high-quality AWG26 HDMI standard cables and adhere to the recommended cable distances (up to 10m for 4K, 20m for 1080p).
  • ARC Volume Control: Remember that when ARC is active, you'll likely need to adjust the volume directly on your sound system, not your TV remote.
  • Firmware Update: The manufacturer has updated the firmware, removing the PWR button from the IR remote for improved usability.
  • General Performance: Users have reported that the product generally works very well, indicating reliable performance when set up correctly.

10. Warranty and Support

For warranty information and technical support, please refer to the official Navceker website or contact your retailer. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual is available for download: Navceker ZY-HS402 User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.