VaneAims LA36M

Contents

VaneAims LA36M Series Button Switch Accessories

Instruction Manual

1. Product Overview

This manual provides detailed instructions for the VaneAims LA36M series button switch accessories. These components are designed for industrial control applications, offering reliable performance and ease of installation with 22mm panel mount pushbuttons. The series includes Normally Open (NO) and Normally Closed (NC) contact switch modules, LED light contacts, rail button brackets, and waterproof protection caps.

LA36M Series Button Switch Parts Overview

Figure 1: Overview of VaneAims LA36M Series Button Switch Parts

Key Features:

  • Silver Contacts: Ensures good electrical conductivity.
  • Durable Shell: Robust construction for long-lasting use.
  • Fire Retardant: Enhanced safety features.
  • Superior Quality: Designed for reliable performance in industrial environments.

2. Setup and Installation

Before beginning any installation, ensure the power supply to the circuit is completely disconnected to prevent electrical hazards.

2.1. Contact Switch Module Installation (NO/NC)

  1. Identify the contact module type: Blue modules are Normally Open (NO), and Red modules are Normally Closed (NC).
  2. Align the contact module with the corresponding slots on the LA36M button body.
  3. Firmly snap the module into place until it clicks, ensuring a secure connection.
LA36M Contacts Assembly

Figure 2: Assembly and Disassembly of Contact Modules

2.2. LED Light Contact Module Installation

The LED indicator contact module is used with illuminated button heads.

  1. Ensure the LED module is compatible with your illuminated button head.
  2. Align the LED module with the button body and snap it into place.
  3. Connect the LED module to the appropriate power source (e.g., AC 220V for the shown version).
LA36M LED Indicator Contact Module

Figure 3: LED Indicator Contact Module Diagram

2.3. Rail Button Bracket Installation

Rail button brackets are available in standard and elevated versions for various installation needs and are DIN rail-compatible.

  1. Select the appropriate bracket type (standard or elevated) for your application.
  2. Mount the bracket securely onto a DIN rail.
  3. Attach the button switch assembly to the bracket, ensuring accurate positioning for proper fit.
LA36M Assembled Push Button with Bracket

Figure 4: Assembled Push Button with Rail Bracket

2.4. Waterproof Cap Installation

The round push button waterproof cap provides splash-proof and dust-proof protection for button heads.

  1. Ensure the button head is clean and dry.
  2. Carefully place the waterproof cap over the button head, ensuring a snug fit around the 22mm diameter.
LA36M Waterproof Cap Dimensions

Figure 5: Dimensions of the Waterproof Cap

3. Operation

3.1. NO/NC Contact Switch Modules

  • Normally Open (NO) - Blue Module: In its default state, the circuit is disconnected. When the button is pressed, the circuit closes and connects.
  • Normally Closed (NC) - Red Module: In its default state, the circuit is connected. When the button is pressed, the circuit opens and disconnects.
LA36M Contact Instructions

Figure 6: NO (Blue) and NC (Red) Contact Operation

3.2. LED Indicator

The LED indicator module illuminates when power is supplied and the circuit conditions (e.g., button press) activate it, providing visual feedback on the switch status.

4. Maintenance

  • Keep the switch components clean and free from dust and debris.
  • Regularly inspect connections for tightness and ensure no wires are frayed or damaged.
  • If using waterproof caps, periodically check for tears or damage to maintain protection.

5. Troubleshooting

  • Switch not responding: Verify all contact modules are securely snapped into place and wiring connections are correct. Ensure power supply is active.
  • LED not illuminating: Check the power supply to the LED module and ensure the correct voltage is applied. Confirm the LED module is properly seated.
  • Intermittent operation: Inspect for loose connections or damaged components. Ensure the button mechanism moves freely without obstruction.

6. Specifications

ComponentSpecification
Model NumberLA36M
MaterialABS (for housing), Silver-plated contacts
Rated Insulation Voltage (Ui)400V
Rated Thermal Current (Ith)10A
Rated Operational Current (AC-15)10A
Rated Operational Current (DC-13)10A
CertificationsGB/T 14048.5, CE certified
Panel Cut-out Diameter22mm
LED Voltage Range12V to 380V (options available)
LED Current Rating≤ 20mA (AC 220V version shown)
Waterproof Cap MaterialSilicone
Package Dimensions (L x W x H)10cm x 10cm x 10cm
Package Weight0.03 kg

7. User Tips

  • Always double-check the contact type (NO or NC) before installation to ensure it matches your circuit requirements.
  • For LED indicators, confirm the voltage rating of the module matches your power supply to avoid damage.
  • Ensure all components are firmly seated and connections are secure to prevent intermittent operation.
  • The waterproof cap is effective for splash and dust protection; however, avoid submerging the button.

8. Manufacturing Process

The VaneAims LA36M contact modules undergo an automated assembly process to ensure precision and consistent quality.

Video 1: Automated Assembly of LA36M Contact Modules

9. Warranty and Support

For any questions regarding product functionality, troubleshooting, or warranty claims, please contact your seller or VaneAims customer support directly. A detailed user manual in PDF format is also available for download:

View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.