Introduction
The Yieryi Digital 4 In 1 Soil PH Meter is a versatile instrument designed to help you understand and optimize your soil conditions for healthier plants. This device accurately measures four critical soil parameters: pH level, moisture content, temperature, and sunlight intensity. By providing clear, digital readings, it assists both novice and experienced gardeners in making informed decisions about plant care, preventing issues like overwatering or incorrect soil acidity.

Figure 1: The Yieryi 4-in-1 Soil Meter and its measurement capabilities.

Figure 2: Wide application range of the soil meter.
Video 1: A brief demonstration of the soil meter's features and usage, including battery installation and basic operation.
Product Features
- 4-in-1 Functionality: Measures soil pH, moisture, temperature, and sunlight intensity.
- Digital Display: Large LCD screen with optional backlight for easy reading in various conditions.
- Sensitive Probe: Metal probe designed for accurate analysis of soil status.
- Easy Operation: Simple button controls for power and unit switching.
- Battery Powered: Operates on a single 9V battery (not included).
- Durable Design: Available in multiple colors (e.g., yellow and black).

Figure 3: Available color options for the soil meter.
Setup
- Battery Installation:
- Locate the battery compartment on the back of the device.
- Slide open the battery cover.
- Insert one 9V battery, ensuring correct polarity.
- Close the battery cover securely.

Figure 4: Battery compartment for 9V battery.
- Probe Preparation:
- Before first use, carefully remove the white protective cover from the metal probe.
- Ensure the probe is clean and free of debris.

Figure 5: Remove the white protective cover from the probe before use.
Operating Instructions
To ensure accurate readings, always clean the probe before and after each use. Insert the probe vertically into the soil, avoiding rocks or hard objects that could damage it. For best results, insert the probe approximately 76mm-120mm (3-5 inches) into the soil.

Figure 6: Recommended probe insertion depth.
1. Light Intensity Measurement
- Press the "ON" button to turn on the instrument.
- Align the highest point light source sensor window towards the light source.
- The current light intensity will be displayed on the LCD screen.
Note: Do not block the light sensor or create shadows over it during measurement.

Figure 7: Measuring sunlight intensity.
| Display | Intensity |
|---|---|
| LOW- | Very Low |
| LOW | Low |
| LOW+ | Slightly Low |
| NOR- | Slightly Normal |
| NOR | Normal |
| NOR+ | Slightly High |
| HGH- | Higher |
| HGH | High |
| HGH+ | Very High |
2. PH Measurement
- Push the [PH/℃] switch on the back of the instrument to the "PH" position.
- Press the "ON" button to turn on the instrument.
- Insert the probe vertically into the soil at the edge of the middle stem and test as soon as possible.
- The PH value will be displayed on the LCD.
- Measure several times to get the most accurate value.
Note: If the measured soil is too dry or too fertile to give an accurate PH, you can sprinkle water and wait for half an hour before re-measuring. Gently push the probe into the soil to avoid damage.

Figure 8: Measuring soil pH.

Figure 9: Location of the PH/Temperature/Humidity switch on the back of the meter.
| PH Value | Soil pH |
|---|---|
| < 4.5 | Extremely Acidic |
| 4.5 - 5.5 | Strongly Acidic |
| 5.5 - 6.5 | Acidic |
| 6.5 - 7.5 | Neutral |
| 7.5 - 8.5 | Alkaline |
| 8.5 - 9.5 | Strong Alkaline |
| > 9.5 | Extremely Alkaline |
3. Moisture Measurement
- Push the [PH/℃] button on the back to the "℃" position.
- Press the "ON" button to turn on the instrument.
- Insert the probe vertically into the soil as deeply as possible.
- The soil moisture value will be displayed on the LCD screen.
- Measure several times to get the most accurate value.

Figure 10: Measuring soil moisture.
| Display | Moisture Level |
|---|---|
| DRY+ | Very Dry |
| DRY | Dry |
| NOR | Normal |
| WET | Wet |
| WET+ | Very Wet |
4. Temperature Measurement
- When measuring moisture, the soil temperature value will be displayed on the LCD screen simultaneously.
- Press the [℃/℉ OFF] button to switch the temperature display between Celsius (℃) and Fahrenheit (℉).
- Long press the OFF button for 5 seconds to shut down the instrument.
Note: If the probe is not inserted into the soil, the instrument will display the accurate ambient air temperature.

Figure 11: Measuring soil temperature.
Maintenance
- Cleaning the Probe: After each use, remove the probe from the soil and wipe it clean with a soft cloth. Do not use abrasive materials or harsh chemicals.
- Storage: Store the meter in a dry place, away from direct sunlight and extreme temperatures. Re-attach the white protective cover to the probe if available.
- Battery Replacement: Replace the 9V battery when the low power indicator appears on the display.
- Avoid Liquids: Do not immerse the main body of the meter in water or other liquids. The product is designed for soil testing only.
- Handle with Care: Gently insert and remove the probe from the soil to prevent bending or damage.

Figure 12: Cleaning the probe after use.
Troubleshooting
- No Display/Power Issues:
- Check if the 9V battery is correctly installed and has sufficient charge. Replace if necessary.
- Ensure the "ON" button is pressed.
- Inaccurate PH Readings:
- Ensure the soil is not too dry. Water the soil and wait for 30 minutes before re-testing.
- Make sure the probe is clean.
- The product cannot measure the pH of sand or sandy soil accurately.
- Product Not Working:
- Do not attempt to disassemble the product. Disassembly can cause further damage and void any potential support.
- The product is not designed to measure liquids directly (e.g., water). Soaking the probe in water can damage internal electronic components.
- If the product is damaged or unable to work, please contact customer support with photos or videos for assistance.

Figure 13: Important precautions for using the soil meter.
Specifications
| Feature | Specification |
|---|---|
| Model Number | TPH01803 |
| Functions | Soil PH Meter, Soil Moisture Meter, Soil Thermometer, Sunlight Intensity Tester |
| Display Type | Digital LCD (with optional backlight) |
| PH Measurement Range | 3.5 - 9.0 |
| Temperature Range | -9°C to +50°C (16°F to 122°F) |
| Temperature Accuracy | ±1°C / ±1°F |
| Moisture Levels | DRY+, DRY, NOR, WET, WET+ |
| Sunlight Intensity Levels | LOW-, LOW, LOW+, NOR-, NOR, NOR+, HGH-, HGH, HGH+ |
| Probe Length | 204.97 mm |
| Dimensions (L x W x H) | 122mm x 63mm x 36mm |
| Power Source | 1 x 9V battery (not included) |
| Certification | CE |
| Origin | Mainland China |
| DIY Supplies | Plumbing |
| Is Smart Device | No |
| Package Dimensions (L x W x H) | 15 cm x 7 cm x 4 cm |
| Package Weight | 0.2 kg |

Figure 14: Product dimensions.
User Tips
- For pH measurements, if your soil is very dry, lightly water it and wait about 30 minutes before testing to get a more accurate reading.
- Always ensure the probe is clean before and after each use to prevent contamination and ensure precision.
- This meter is designed for soil. Avoid using it to measure liquids directly, as this can damage the internal electronics.
- Do not use the meter in sand or sandy soil for pH measurements, as it may not provide accurate results.
- The device requires a 9V battery, which is not included in the package. Make sure to have one ready for immediate use.
- If you encounter any issues, refrain from disassembling the device yourself. Contact customer support for guidance.
Warranty and Support
The manufacturer provides support for product issues. If your product is found to be damaged or unable to work, please contact customer support with relevant photos or videos for assistance. They will review your case and provide appropriate compensation or solutions.
For additional language manuals or further inquiries, please reach out to customer service.