Introduction
This manual provides essential information for the safe and effective use of your replacement bread maker barrel and mixing blade. This product is designed to be compatible with various bread maker models, ensuring your appliance continues to function optimally.
I. Warning & Safety Information
- WARNING: Do not disassemble the bread maker appliance unless you are a qualified engineer.
II. Instructions for Use
Installation and Initial Setup
- Rinse the inner pot thoroughly before placing it into the bread maker.
- Ensure the mixing blade is securely attached to the shaft inside the barrel.
- Carefully place the bread barrel into the bread maker's main compartment, ensuring it is seated correctly.
Operating Instructions
- Add an appropriate amount of ingredients (e.g., flour, water, yeast) according to your bread maker's recipe.
- Close the lid of your bread maker and connect it to a power source.
- Select your desired program and start the bread maker.

Image: Bread maker inner pot with mixing blade installed.
III. Precautions & Maintenance
- Do not operate the inner pot empty; always add ingredients before starting the bread maker.
- Avoid scratching the non-stick coating of the inner pot.
- Do not stir ingredients with metal utensils inside the pot to prevent damage to the non-stick surface. Use plastic or wooden utensils.
- After use, allow the pot to cool before cleaning. Wash with warm soapy water and a soft sponge.

Image: Top view of the bread maker inner pot, showing the non-stick surface.
IV. Features
- Easy to clean non-stick surface.
- Heat-resistant and durable construction.
- Includes a mixing blade for optimal dough preparation.
V. Troubleshooting (FAQs)
- Q: Why is the bread sticking to the pot?
- A: Check whether improper usage occurred. Ensure the pot was properly greased (if required by your recipe) and that the non-stick coating is not damaged. Overfilling the pot can also lead to sticking.
- Q: Is this compatible with Britânia bread makers?
- A: The listed compatible models are Philips HD9015, HD9016, HD9045, HD9046, Hamilton Beach BM07, Sunbeam 5891, BM-1335, XBM-1018, and DL-T01. Please verify your specific Britânia model against these to ensure compatibility.
VI. Specifications
| Attribute | Value |
|---|---|
| Brand Name | FGHGF |
| Model Number Compatibility | for Philips HD9015 HD9016 HD9046 HD9045 |
| Type | Bread Maker Parts |
| Part Type 1 | Bread Barrel |
| Part Type 2 | Mixing Blade |
| Origin | Mainland China |
| High-concerned chemical | None |
| Package Weight | 0.7 kg |
| Package Dimensions | 22cm x 20cm x 20cm |

Image: Bottom view of the bread maker inner pot, illustrating the drive mechanism.
VII. User Tips
- Always ensure the mixing blade is firmly seated before adding ingredients to prevent issues during the mixing cycle.
- For easier cleaning and to prolong the life of the non-stick coating, consider a light coating of cooking oil or spray before adding ingredients, especially for sticky doughs.
- If you notice any unusual noises or resistance when installing the pot, double-check its alignment within the bread maker.
VIII. Warranty & Support
If you encounter any quality-related issues with your bread maker barrel or mixing blade, please contact our customer service team for assistance.
For further information or support, you may refer to the official product page or contact the seller directly.
Production & Quality Assurance
This product is manufactured under professional production standards to ensure quality and reliability.
Video: Overview of the manufacturing process, highlighting professional production and quality assurance.