1. Introduction
This manual provides comprehensive instructions for the EASYGUARD ECC001 Cruise Control and Speed Limiter System. This system is designed to enhance driving comfort and safety by allowing drivers to maintain a set speed without continuous accelerator input and to limit maximum speed. It is compatible with most 12V vehicles equipped with an electronic throttle.
2. Important Safety Information
- Professional Installation Required: The installation of this cruise control system requires connecting multiple wires. It is crucial that installation is performed by a qualified and professional car alarm technician. Do not attempt self-installation without prior experience.
- Electronic Throttle Compatibility: This cruise control system is exclusively designed for vehicles with an electronic throttle. It is not compatible with vehicles using a mechanical throttle.
- Vehicle Confirmation: Before purchasing or installing, you may need to provide photos of your vehicle's steering wheel and throttle for compatibility confirmation.
- Ground Wire Connection: Always connect the ground (GND) wires first when making any wire connections to prevent electrical damage.
3. Package Contents
The EASYGUARD ECC001 Cruise Control System package includes the following main components:
- Control Module (ECC001): The central processing unit for the cruise control system.
- LCD Display: Provides digital speed readings and other indicators.
- Cruise Control Handle (Universal Handle UH01): The primary interface for controlling cruise and speed limit functions.
- Main Wire Harnesses: Various wiring sets for connecting the components to the vehicle's electrical system.
- Universal Throttle Connector: For integration with the vehicle's electronic throttle.
- Programming Connector: Used for specific wiring connections.
- Clutch Wire (Optional): For manual transmission vehicles.
4. Installation Instructions
WARNING: Installation must be performed by a qualified professional. Incorrect installation can lead to vehicle damage or malfunction.
4.1 Pre-Installation Checks
- Ensure your vehicle has an electronic throttle.
- Verify compatibility with your specific vehicle model, such as the dongfeng Aeolus E70.
- Gather all necessary tools and safety equipment.
4.2 Wiring Method for Throttle Connector
- Red wire: Connect with any 5V wire from the throttle connector.
- Brown/white wire: Connect to the chassis ground (0V).
- Orange and Orange/white wires: These form one group. Connect them to the 1st signal wires. When connecting, cut the 1st signal wire in half, and connect the accelerator pedal or gas pedal terminal with the orange wire, and the wire harness terminal with the orange/white wire.
- Green and Green/white wires: These form another group. Connect them to the 2nd signal wires. When connecting, cut the 2nd signal wire in half, and connect the accelerator pedal or gas pedal terminal with the green wire, and the wire harness terminal with the green/white wire.
4.3 Programming Connector and Clutch Wire
- Pink wire (Programming connector): Connect with the foot brake wire.
- Blue wire (Programming connector): Connect with the foot brake switch constant 12V wire.
- Clutch wire (Optional): This wire is only required for manual transmission cars.
4.4 General Installation Notes
- Mount the control module in a secure, dry location within the vehicle.
- Install the LCD display in a visible, non-obstructive location on the dashboard.
- Integrate the cruise control handle into the steering wheel area as per the vehicle's design or universal mounting options.
5. Operating Instructions
5.1 Activating Cruise Control
- Ensure your car's speed is over 40 km/h.
- Press the ON/OFF switch on the cruise control handle to activate the system. The LED indicator will illuminate.
- Once the cruise function is on, push the handle towards the (- SET) direction. Release your foot from the accelerator pedal. The cruise control will now be active at your current speed.
5.2 Adjusting Speed
- To accelerate, push the handle upwards.
- To decelerate, push the handle downwards.
5.3 Suspending Cruise Control
The cruise control function can be suspended in two ways:
- Step on the brake pedal.
- Push the handle towards the CANCEL direction.
5.4 Resuming Cruise Control
To resume the previously set speed after suspension, push the handle towards the (+ RES) direction.
5.5 Deactivating Cruise Control
To completely turn off the cruise control function, press the ON/OFF switch again.
6. System Features
- Fixed Speed Cruise Function:
- Opening and closing cruise devices.
- Control the speed of the car (Start/cancel/re-cover).
- Change the setting speed.
- Overtaking operation.
- Speed Limit Function: (Commonly used in speed limit function controller)
- Opening and closing speed limiting devices.
- Limited speed setting and adjustment.
- Electronic Throttle Output Control Function: Ensures precise speed management.
- Fuel Consumption Reminder: Helps optimize driving for better fuel efficiency.
- Average Fuel Consumption Display: Provides real-time data on fuel usage.
- Digital Speedometer Function: Integrated into the LCD display for clear speed indication.
- Fatigue Reminder: Promotes safer driving by alerting drivers during long journeys.
- Brake Circuit Fault Detection Tips: Provides alerts for potential issues with the brake circuit.
7. Technical Specifications
| Parameter | Value |
|---|---|
| Voltage | 12V ~ 16V |
| Working Current | < 500mA |
| Working Temperature | -40℃ ~ +105℃ |
| Recommended Road Use | Grade three and above standard highway |
| Fixed Speed Range | 30 km/h ~ 160 km/h |
| Handle Service Life | > 100,000 times |
| Material | ABS |
| Country/Region of Manufacture | China |
| Package Length | 20 cm |
| Package Width | 17 cm |
| Package Height | 10 cm |
| Package Weight | 1.0 kg |
8. Maintenance
- Keep the control module and LCD display clean and free from dust and moisture.
- Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.
- Regularly check all wiring connections for any signs of wear or looseness. If any issues are found, consult a professional technician.
- Do not attempt to open or repair the control module or LCD display yourself, as this will void the warranty.
9. Troubleshooting
If you experience any issues with your EASYGUARD ECC001 system, please refer to the following common problems and solutions:
- System Not Activating:
- Ensure the car speed is above 40 km/h.
- Check if the ON/OFF switch is pressed and the LED indicator is on.
- Verify all wiring connections are secure and correct.
- Inconsistent Speed Control:
- Ensure the road conditions are suitable for cruise control (e.g., not excessively hilly or slippery).
- Check for any error messages on the LCD display or dashboard.
- Brake Circuit Fault Detection:
- If a brake circuit fault is detected, immediately have your vehicle inspected by a qualified mechanic.
For complex issues or if troubleshooting steps do not resolve the problem, please contact customer support or a professional installer.
10. User Tips
- Confirm Compatibility: Before purchasing, it's highly recommended to send photos of your steering wheel and throttle to the seller for confirmation, especially if your car model is not explicitly listed as compatible. This helps ensure a smooth installation process.
- Professional Installation: Due to the complexity of wiring, always opt for installation by a certified professional. This ensures correct functionality and avoids potential damage to your vehicle's electrical system.
11. Frequently Asked Questions (FAQ)
- Q: What are the functionalities of the EASYGUARD ECC001 system?
- A: The system offers fixed speed cruise control, speed limitation, electronic throttle output control, fuel consumption reminders, average fuel consumption display, digital speedometer, fatigue reminder, and brake circuit fault detection tips. It aims to provide foot relaxation and avoid long-time driving fatigue, as well as comply with speed limits.
- Q: Is this product compatible with a Honda Accord 2007?
- A: The product is described as a universal cruise control system for most 12V cars with electronic throttles. However, it is recommended to send photos of your steering wheel and throttle to the seller for confirmation to ensure compatibility with your specific Honda Accord 2007 model.
- Q: Will this product work on a Toyota Yaris 2023?
- A: As a universal system for 12V cars with electronic throttles, it may be compatible. To confirm for your Toyota Yaris 2023, it is best to send photos of your steering wheel and throttle to the seller for a definitive compatibility check.
12. Warranty and Support
12.1 Quality Warranty
- 14-Day Money-Back Guarantee: You can return your undamaged Easyguard product within 14 days of purchase for a full refund for any reason.
- 12-Month Warranty: All products come with a 12-month warranty covering quality-related issues from the date of purchase. This warranty does not cover damages caused by improper use.
- Damaged Goods: If you receive a defective or damaged product, refuse to sign for the package and contact us immediately. Provide proof from the shipping company to receive a free replacement or full refund.
- Returns: If you wish to return a product, please contact customer support for a detailed return address. Products must be returned in full original packing and undamaged condition. Customers are responsible for return shipping costs.
12.2 Free Customer Support
If you need assistance with your EASYGUARD product, our support team is available to help. When contacting support, please have your Easyguard product readily available for efficient troubleshooting.
