Zelmer Vacuum Cleaner Water Tank Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Zelmer vacuum cleaner water tank. Please read these instructions carefully before use to ensure optimal performance and longevity of the product.

2. Product Overview

The Zelmer water tank is a replacement or spare part designed for specific Zelmer vacuum cleaner models. It serves as the container for water during wet cleaning or filtration processes.

Key Features:

• Part Numbers: 9190061, 11011605, 00797647
• Material: High-quality ABS plastic
• Origin: Poland

Important Note:

• This water tank is supplied without filters and without a lid. These components must be purchased separately or transferred from your existing unit.
• The manufacturer reserves the right to change the color of the canister upon delivery (it may be blue, white, or gray). The functionality remains identical regardless of color.

Figure 2.1: Front view of the Zelmer water tank.

Figure 2.2: Side view of the Zelmer water tank.

3. Compatibility

This water tank is compatible with the following Zelmer vacuum cleaner models:

• 9190SP, 9190ST
• 9195SK, 9195SP, 9195ST
• VC79200ST, VC79205SK
• ZVC752SP, ZVC752SPRU, ZVC752SPUA
• ZVC752ST, ZVC752STRU, ZVC752STUA
• ZVC752XTRU
• ZVC752ZK, ZVC752ZKRU, ZVC752ZKUA
• ZVC752ZP, ZVC752ZPRU, ZVC752ZPUA
• ZVC752ZT, ZVC752ZTUA
• ZVC762ST, ZVC762STRU, ZVC762STUA
• ZVC762ZK, ZVC762ZKRU, ZVC762ZKUA

4. Setup and Installation

Follow these steps to correctly install the water tank into your Zelmer vacuum cleaner:

1. Ensure the vacuum cleaner is unplugged from the power outlet before beginning installation.
2. Open the main compartment of your Zelmer vacuum cleaner where the water tank is housed. Refer to your vacuum cleaner's main instruction manual if you are unsure how to access this compartment.
3. Carefully place the new water tank into its designated slot. Ensure it sits firmly and correctly aligned within the vacuum cleaner's body.
4. If applicable, transfer the lid and any necessary filters from your old water tank or install new ones onto the new tank.
5. Close the vacuum cleaner compartment securely.
6. Before first use, perform a visual check to ensure all components are properly seated and there are no visible gaps or misalignments.

Figure 4.1: Water tank installed in a Zelmer vacuum cleaner.

5. Operating Instructions

Once installed, the water tank functions as part of your vacuum cleaner's wet cleaning or water filtration system. Refer to your specific Zelmer vacuum cleaner's instruction manual for detailed operating procedures, including:

• How to fill the water tank with water and/or cleaning solution.
• How to properly secure the lid and filters (if applicable).
• Instructions for operating the vacuum cleaner in wet mode.
• Guidelines for emptying the dirty water tank after use.

6. Maintenance

Regular cleaning of the water tank is crucial for hygiene and to prevent odors or blockages.

1. Emptying: After each use, always empty the dirty water from the tank.
2. Rinsing: Rinse the tank thoroughly with clean water to remove any residue.
3. Cleaning: For a more thorough clean, use a mild detergent and a soft brush to scrub the inside of the tank. Avoid abrasive cleaners or harsh chemicals.
4. Drying: Allow the water tank to air dry completely before reassembling it into the vacuum cleaner or storing it. This prevents mold and mildew growth.
5. Inspection: Periodically inspect the tank for any cracks, damage, or excessive wear. Replace if necessary.

7. Troubleshooting

If you encounter issues with your water tank, consider the following:

• Leaking: Ensure the tank is correctly seated and the lid (if applicable) is securely closed. Check for any visible cracks in the tank.
• Improper Fit: Double-check that the tank is fully inserted into its compartment. Verify that your vacuum cleaner model is listed in the compatibility section.
• Reduced Suction (Wet Mode): This is often related to clogged filters or improper assembly of the lid/filters, not typically the tank itself. Refer to your vacuum cleaner's manual for filter maintenance.

8. Specifications

9. User Tips

• Always use cold or lukewarm water for cleaning, as hot water can sometimes warp plastic components over time.
• For stubborn dirt or odors, a solution of white vinegar and water can be used for cleaning the tank, followed by a thorough rinse.
• Ensure the tank is completely dry before storing your vacuum cleaner to prevent unpleasant smells and bacterial growth.
• If you frequently use your vacuum for wet cleaning, consider having a spare water tank to allow one to dry completely while the other is in use.

10. Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the original purchase documentation or contact the retailer/manufacturer directly. Keep your proof of purchase for any warranty claims.