BESDER 6004MW-IPA80H1

Contents

BESDER 8MP/4MP Ultra HD POE IP Camera User Manual

Model: 6004MW-IPA80H1

1. Introduction

Thank you for choosing the BESDER 8MP/4MP Ultra HD POE IP Camera. This camera is designed to provide high-definition video surveillance with advanced features such as audio recording, motion detection, and infrared night vision. Its robust, weatherproof design makes it suitable for both indoor and outdoor use. This manual will guide you through the setup, operation, and maintenance of your new security camera.

Important Note: The power adapter or power supply is not included with this bullet-wired IP camera.

2. Product Overview

2.1 Key Features

  • High Definition: Available in 8MP (3840*2160) or 4MP (2560*1440) resolution for clearer and sharper images.
  • Audio Recording: Built-in microphone to capture audio around the camera.
  • Video Compression: Utilizes H.265 High Profile for efficient storage and bandwidth usage.
  • Night Vision: Equipped with IR-CUT and 4 Pcs Array LEDs, providing up to 25 meters (82 feet) of infrared night vision.
  • Power Options: Supports both DC 12V and 48V Power over Ethernet (PoE).
  • Motion Detection: Advanced AI motion detection with alert notifications to your mobile app and email.
  • Connectivity: IP/Network Wired via RJ45 10M/100M self-adaptive Ethernet interface.
  • Compatibility: ONVIF 2.0 support, compatible with various NVRs (e.g., Hikvision, Dahua) and XMEye NVRs (Plug&Play).
  • Remote Access: View live streams and recordings via the XMEye app on Android/iOS or CMS software on Windows 7/8/10.
  • Weatherproof: IP66 rated metal casing, designed for indoor and outdoor use, operating in temperatures from -20°C to 55°C.

2.2 Package Contents

  • 1 x BESDER IP Camera
  • 1 x English User Manual
  • 1 x Rain Waterproof Set
  • 1 x Screw Pack

2.3 Product Diagram and Dimensions

Diagram of BESDER IP Camera components and dimensions
Figure 1: BESDER IP Camera Components and Dimensions. Labels include 4 Pcs Array LED, Lens, IR Sensor, Metal Case, IP66 Waterproof, Power Port, LAN Port. Dimensions shown are 160mm length, 60mm height, 50mm bracket height.
Detailed dimensions of the BESDER IP Camera
Figure 2: Detailed dimensions of the camera body: 10cm length, 6cm height, 8.8cm base length, 6.6cm base width. Net weight approximately 0.25kg.

2.4 Product Video

Video 1: Product unboxing and demonstration of day and night vision capabilities.

3. Specifications

AttributeValue
Megapixels8MP
TF CardNone
Power SupplyNormal (DC 12V or 48V PoE Switch)
Internal StorageNone
InstallationSide
ColorWHITE
Audio OutputNone (Built-in microphone for input)
Minimum Illumination(Lux)0.1 Lux
Viewing Angle75°
Video Compression FormatH.265
IR Distance(m)25 Meters
Power Supply(V)12V
Alarm ActionFTP Photo, telefon Alarm, Email Photo
Power Consumption(W)Less than 6W
Supported Mobile SystemsAndroid, iOS
Sensor BrandSmartSens
SensorCMOS
Model Number6004MW-IPA80H1
Supported Operating SystemsWindows 7, Windows 8, Windows 10
Lens (mm)3.6mm
ConnectivityIP/Network Wired
High Definition8.0 Megapixels
StyleBullet Camera
Brand NameBESDER
OriginMainland China
CertificationCE
Smart home platformOther
Special FeaturesWaterproof / Weatherproof
MaterialMetal
Mobile MonitoringSupports by APP XMEye
Motion DetectSupports multi Area
ONVIFSupport
PowerDC 12V or 48V PoE Switch
Websitexmeye.net
IR Night4 Pcs infrared LEDs
Special FeatureWaterproof
Style 2Outdoor Camera/ Indoor Camera

4. Setup

4.1 Power Connection

The camera offers two power options: DC 12V or Power over Ethernet (PoE).

  • DC 12V Version: Requires a DC 12V 1A-2A power supply (not included). Connect the power supply to the camera's power port.
  • 48V PoE Version: Has a built-in PoE module. It can be powered directly through an Ethernet cable connected to a 48V PoE Switch/Injector (not included). This option allows both power and data transmission over a single cable. It can also be powered by a DC 12V 1A-2A power supply.
Power Over Ethernet connection diagram
Figure 3: Power Over Ethernet (PoE) setup. The camera connects to a PoE NVR or switch via a single Ethernet cable, eliminating the need for a separate power adapter.

4.2 Mobile App Connection (XMEye)

Follow these steps to connect your camera to the XMEye mobile app:

  1. Power & Connect Camera: Connect the camera to power (DC 12V adapter or PoE) and ensure it's connected to your network via an Ethernet cable to your router or NVR.
  2. Download XMEye App: Scan the QR code provided in the quick operation instructions or search for "XMEye" in your mobile app store (available for iOS and Android).
    Mobile App Connection Steps
    Figure 4: Visual guide for mobile app connection, showing QR codes for XMEye app download and steps for adding a device.
  3. Add Camera in App: Open the XMEye app, register an account if you haven't already, and log in. Tap the '+' icon or similar to add a device. You can choose "Manual Add" and enter the camera's serial number, or use "WiFi config" if applicable (note: this camera is wired, not Wi-Fi).
  4. Enjoy Live View: Once added, you can view the live feed from your camera.

4.3 Initial Network Configuration

The default IP address of the camera is 192.168.1.10. The default username is admin, and the password is null (empty). If you encounter an "Can't find the Device" error, it might be due to an IP address conflict. You will need to change the camera's IP address to be in the same network segment as your router (e.g., if your router is 192.168.0.1, change the camera's IP to 192.168.0.XX) using the CMS software.

5. Operation

5.1 Multiple Viewing Methods

You can monitor your camera feed from various devices:

  • Mobile Devices: Use the XMEye app on your Android or iOS smartphone/tablet for remote viewing.
  • PC Software: Utilize the CMS client software for Windows (Windows 7, 8, 10) to view and manage multiple cameras.
Multiple Viewing Methods for BESDER IP Camera
Figure 5: The camera supports multiple viewing methods including mobile phones, tablets, and desktop computers.
P2P Remote Viewing on a smartphone
Figure 6: P2P Remote Viewing allows you to connect to your camera and watch live streams from anywhere using your mobile device.

5.2 Motion Detection & Alert Notification

The camera features AI motion detection. When an exception or movement is detected, the system will:

  • Push information and alerts to your mobile phone app (XMEye).
  • Send an email notification with an abnormal picture to your bound mailbox.
  • Supports FTP Photo and telephone alarm actions.

You can configure motion detection settings within the CMS software.

Motion Detection and App Alarm
Figure 7: Motion detection triggers push notifications to your mobile app, alerting you to activity.

5.3 Audio Recording

The camera has a built-in microphone that picks up audio from its surroundings. This allows you to hear and record what is happening in the monitored area, providing a clear voice record of events.

Hear and Record Voice feature
Figure 8: The camera's built-in microphone allows you to hear and record audio, accessible via the mobile app.

5.4 Day and Night Vision

The camera is equipped with IR-CUT technology and infrared LEDs to provide clear surveillance both day and night. During the day, it captures full-color video. At night, it automatically switches to black and white infrared mode for visibility in low-light or no-light conditions.

Day and Night Vision comparison
Figure 9: Comparison of day vision (color) and night vision (black and white infrared) captured by the camera.

5.5 Focal Length Selection

The camera features a 3.6mm lens. Understanding focal length is important for optimal placement:

  • A larger focal length results in a smaller field of view but a farther shooting distance.
  • A smaller focal length results in a larger field of view but a closer shooting distance.
Lens focal length selection diagram
Figure 10: Diagram illustrating how different focal lengths (2.8mm, 3.6mm, 6mm, 8mm) affect the camera angle and shooting distance. The 3.6mm lens provides a balanced view.

6. Maintenance

6.1 Weather Resistance

The camera is IP66 rated, meaning it is protected against dust ingress and powerful water jets. It is designed to withstand various weather conditions, including rain, snow, and sun, and operates effectively in temperatures ranging from -20°C to 55°C.

IP66 Waterproof feature
Figure 11: The camera's IP66 waterproof rating ensures durability in various weather conditions like rain, snow, and sun.

6.2 Cleaning

To maintain optimal performance and image clarity, periodically clean the camera lens and housing. Use a soft, damp cloth to wipe away dust and dirt. Avoid using harsh chemicals or abrasive materials that could scratch the lens or damage the casing.

7. Troubleshooting (FAQ)

Q: What is the default IP address, username, and password for the camera?
A: The default IP address is 192.168.1.10. The username is 'admin', and the password is 'null' (empty).
Q: Does the camera support Motion Detect, FTP, Email alarm, and RTSP?
A: Yes, all BESDER IP Cameras support these functions. Motion detection can be set up in the CMS software. For FTP, we recommend using Server-U and FileZilla FTP Server. For email alarms, use an email server that supports SMTP (Gmail is recommended, Hotmail/Yahoo may not support SMTP). The RTSP URL for VLC media Player is: rtsp://$(IP):$(PORT)/user=$(USER)&password=$(PWD)&channel=$(Channel)&stream=$(Stream).sdp?real_stream (Example: rtsp://10.6.10.25:554/user=admin&password=&channel=1&stream=0.sdp?real_stream).
Q: What are the port information for the cameras?
A: ONVIF 2.0 Port: 8899; RTSP Port: 554; HTTP Port: 80; Media Port: 34567.
Q: Does the camera support IE, Chrome, Firefox, etc.?
A: Due to plugin issues, for the web interface IP address URL, only Internet Explorer (IE) supports multiple languages. Chrome and Safari may only support Chinese. For the cloud server XMEYE.NET, it supports multiple languages.
Q: I added the camera to the CMS list, but it says "Can't find the Device" even though I see the default IP address 192.168.1.10 in the menu. What should I do?
A: This indicates an IP address conflict. The default IP address is not in the same network segment as your router. Please click "Edit Device" in the CMS software to change the camera's IP address to match your router's network segment. For example, if your router's IP address is 192.168.0.1, you need to change the camera's IP address to 192.168.0.XX.

8. User Tips

  • No Wi-Fi Support: This camera is a wired IP camera and does not support Wi-Fi connectivity. Monitoring is exclusively through the XMEye app on your mobile device or CMS software on PC via a wired network connection.
  • Power Options: Remember you have flexibility in powering the camera: either a standard DC 12V power supply or a 48V PoE switch/injector for simplified wiring.
  • Night Vision Clarity: The camera uses infrared LEDs for night vision, providing clear black and white images in the dark. It does not offer color night vision.

9. Compliance and Disclaimer

⚠ Disclaimer:

Camera products can only be used for purposes permissible under applicable laws and regulations. Misuse of this product for any illegal activities is strictly forbidden. Please ensure compliance with all applicable laws and regulations in your country or area.

10. Warranty and Support

This product comes with a 1-year manufacturer's limited warranty for defective items (excluding terms damaged or misused after receipt). Defective items must be reported and returned within the warranty period.

For technical support or further inquiries, please refer to the contact information provided by your seller or visit xmeye.net for software and resources.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.