Douk Audio ST-01 PRO

Contents

Douk Audio ST-01 PRO HiFi Vacuum Tube Power Amplifier User Manual

Brand: Douk Audio | Model: ST-01 PRO

1. Overview

The Douk Audio ST-01 PRO is an integrated HiFi vacuum tube power amplifier featuring a unique VU meter, Bluetooth 5.0 connectivity, USB DAC, and multiple digital audio inputs. It is designed to deliver warm, sweet, and clear sound with powerful output, making it suitable for various audio setups and audiophiles. The amplifier includes tone controls for bass and treble adjustment and can drive passive speakers with 100W+100W output (4Ω).

Its practical functions are simplified with a full-function remote control, input selection indicators, and a durable aluminum alloy case.

2. What's in the Box

  • 1* ST-01 PRO Amplifier
  • 1* DC 24V Power Adapter (optional, depending on purchase)
  • 1* Remote Control (2*AAA batteries not included)
  • 1* USB Cable
  • 1* Bluetooth Antenna
  • 1* User Manual

3. Product Diagram

Front Panel

Labeled diagram of the ST-01 PRO amplifier's front panel controls.

Detailed diagram of the front panel, identifying the VU meter, input channel indicators, functional knob (power/input/volume), bass knob, infrared receiver, and treble knob.

  1. VU meter
  2. Input channel indicator (Bluetooth/U-disk/RCA/Optical/Coaxial/USB)
  3. Functional knob (short press to power on/switch input mode; long press to off; rotate to adjust main volume)
  4. Bass knob
  5. Infrared receiver
  6. Treble knob

Rear Panel

Labeled diagram of the ST-01 PRO amplifier's rear panel connections.

Detailed diagram of the rear panel, identifying the Bluetooth antenna socket, U-disk input, RCA input, Coaxial input, Optical input, PC-USB input, PRE-OUT, Speaker output, and Power interface.

  1. Bluetooth antenna socket
  2. U-disk input
  3. RCA input (red to right channel, white to left channel)
  4. Coaxial input
  5. Optical input
  6. PC-USB input
  7. PRE-OUT (3.5mm AUX signal output)
  8. Speaker output (red to +/ black to -, R to right speaker / L to left speaker)
  9. Power interface (DC 18-30V, 5.5*2.5mm)

4. Setup Instructions

Initial Setup

  1. Insert Vacuum Tubes: Carefully insert the vacuum tubes into the sockets on the ST-01 PRO. Ensure the pins are not bent or deformed.
  2. Connect Speakers: Connect your passive speakers to the banana speaker jacks output. Alternatively, connect an active speaker or another amplifier to the PRE-OUT (3.5mm AUX) of the ST-01 PRO.
  3. Wired Audio Source Connection:
    • Connect your audio source (e.g., CD player, streamer) to the RCA, Coaxial, or Optical input of the ST-01 PRO.
    • To use with a computer, connect the computer to the PC-USB socket.
    • To use with a U-disk, insert the U-disk into its USB socket.
  4. Power Connection: Connect the power adapter to the ST-01 PRO, then plug the power cable into a wall socket.

PC-USB Setup for Computer

  1. Connect the ST-01 PRO to your computer via the original USB cable. (USB supports hot swapping).
  2. Toggle the input mode switch on the amplifier to USB mode.
  3. On your computer, right-click the speaker icon in the lower-right corner and select 'Playback Devices'.
  4. Select the USB device recognized by the computer (e.g., 'USB HIFI Audio') in the pop-up box.
  5. Set 'USB HIFI Audio' as the default playback device.

For detailed diagrams and additional setup information, please refer to the official user manual PDF available at: Douk Audio ST-01 PRO User Manual (PDF)

5. Operating Instructions

Basic Operation

  1. Power On & Input Selection: Short press the functional knob to turn on the device. Short press again to cycle through input modes until the desired input (RCA/Coaxial/Optical/PC-USB/U-disk) is selected.
  2. Wireless Input (Bluetooth):
    • Short press the functional knob to power on, then short press to switch to BT/USB position (the blue indicator will flash).
    • On your phone or Bluetooth-enabled device, turn on Bluetooth, search for "DOUK AUDIO" or "DOUK AUDIO ST-01PRO", and connect. The indicator will turn steady blue after a successful connection.
  3. U-disk Input: When a U-disk is inserted, the input mode will automatically switch to U-disk (U-disk has priority over other inputs).
  4. Play Music: Start playing music from your selected audio source.
  5. Adjust Sound: Use the treble and bass knobs to adjust the tone according to your preferences. Rotate the main functional knob to adjust the volume.
  6. Power Off: Long press the functional knob to power off the amplifier. Then, disconnect the power adapter.

Remote Control Functions

ST-01 PRO amplifier being controlled by its remote control.

The amplifier on a desk with a remote control, demonstrating its remote operation capability.

  • On/Off: Power on or off the amplifier.
  • Input Channel Selection: Switch between different audio input sources.
  • Mute: Mute or unmute the audio output.
  • Play/Pause: Control playback for U-disk or Bluetooth sources.
  • Previous Song: Skip to the previous track.
  • Next Song: Skip to the next track.
  • VOL - / VOL +: Decrease or increase the volume.
  • Select Song by Number: (Functionality may vary by source)
  • Clear Bluetooth Pairing History: Reset Bluetooth connections.
  • On/Off Automatic Detection Mute Function: Toggle automatic muting.

Product demonstration video showing the amplifier in operation.

6. Specifications

FeatureSpecification
BrandDouk Audio
ModelST-01 PRO
Audio InputBluetooth / PC-USB / Coaxial / Optical / RCA / U-disk
Audio OutputBanana speaker jacks / PRE-OUT (3.5mm AUX)
Maximum Output Power100W * 2 (4Ω)
Speaker Matched Impedance3-8Ω
Input Sensitivity0.775V
Frequency Response20Hz-20KHz (±3dB)
THD0.07% (1kHz, 1W)
SNR≥98dB
3.5mm AUX Signal Output Amplitude2V
Treble / Bass Adjustment Range±6dB
Working VoltageDC 18-30V (5.5*2.5mm)
System PC-USB SupportedW7/W8/W10/MAC/Linux
Sampling Rate Supported (USB)96KHz/24Bit
Sampling Rate Supported (Bluetooth)48KHz/24Bit
Sampling Rate Supported (COAX/OPT)192KHz/24Bit
Supported U-disk FormatsMP3/WAV/WMA/FLAC/APE
Max Capacity of U-disk64G (FAT32 format)
Net Weight (ST-01 PRO)661g / 1.46lb
Package Weight (with 24V4.5A power supply)1.4kg / 3.09lb
Dimensions (W*D*H)115*98*54mm / 4.53*3.86*2.13in
Package Dimensions (W*D*H)240*290*90mm / 9.45*11.42*3.54in

7. Troubleshooting (FAQ)

General Audio Issues

  • Q: Why are all cables connected but there is no sound?
    A: 1. Check the VU meter or input indicator light: If they light up normally, please check if the corresponding input mode is selected. If they cannot light up, use another power supply to detect whether the fault is the power supply or ST-01 PRO. 2. If the VU meter or input indicator light is on but there is no sound, the power supply is normal. Continue to check the order of audio signal transmission: audio source → audio cable → preamp/decoder → amplifier → speaker. 3. If both are normal, check whether the audio source is muted, paused, or the volume is too small.
  • Q: Why is the sound distorted? How to adjust the treble, bass and main volume?
    A: The input amplitude might be too large. If both the audio source and ST-01 PRO volumes are at maximum, distortion can occur. Turn down the volume of the audio source or the amplifier. Generally, adjust the amplifier volume to about 60%, then fine-tune the preamp volume (this greatly reduces distortion). Treble and bass are adjusted based on music style, device types, and personal preference.
  • Q: Why does the volume of different audio sources (e.g., changing from CD player to phone) differ when the machine volume is unchanged?
    A: Different audio devices output different signal amplitudes (e.g., phone usually 0.35V, CD player 1V). This is normal.
  • Q: Why is the sound of the power amplifier not good at first, with unclear high frequency, but the sound is normal after working for a period of time?
    A: For new speakers and amplifiers, we recommend a 'burn-in' period of at least 10 hours to achieve optimal sound quality.
  • Q: Why is there a loud current sound or buzzing sound on the speaker?
    A: 1. Use the original power supply. Many third-party power supplies can cause interference. 2. When using unshielded signal cables without a load, interface signals can cause noise. Use shielded signal cables or unplug them. 3. If noise persists, disconnect all inputs, retaining only the power supply and cable. If noise disappears, it's from the audio input. If noise remains, it's likely power supply interference or internal product noise.
  • Q: What are the reasons for the unbalanced left and right volume of the speakers and how to eliminate them?
    A: Check the audio source, input cable, volume potentiometer (some amplifiers have balanced control), speaker cable, and speakers (ensure symmetrical positioning and distance).
  • Q: Why is there a thumping sound when switching on/off?
    A: Ensure the correct on-off sequence. When turning on: audio source → preamp/DAC → amplifier → speaker. When turning off, reverse the sequence. Turning off the amplifier first can cause an impact sound due to internal capacitor discharge, potentially damaging speakers or the amplifier.

Input Specific Issues

  • Q: Why is there no sound output when optical and coaxial inputs are used?
    A: Confirm that the connected device's optical and coaxial output is enabled and set to PCM output mode and the correct sampling rate on the TV or source device.
  • Q: ST-01 PRO cannot work after connecting with phone via PC-USB input, is a driver required?
    A: No, connecting a phone to ST-01 PRO is driver-free. Check if the phone and connection cable support OTG function. Some phones require enabling the OTG option and setting the output device in their settings. For Android, an OTG cable is needed; for iOS, a camera kit is required.
  • Q: Why is there no music output after inserting a U-disk?
    A: Ensure the input mode is switched to BT/USB on the ST-01 PRO. Confirm the U-disk format and capacity (only FAT32 format within 64G is supported).
  • Q: Why is U-disk playback sometimes laggy?
    A: Ensure music files are in supported formats (MP3/FLAC/APE/WMA/WAV) and placed under the root directory, not in new folders. Avoid playing unsupported file types.

Bluetooth Issues

  • Q: Why Bluetooth cannot be searched? How to switch to Bluetooth mode?
    A: Toggle the input switch on the panel or press the "SELECT" button on the remote control to switch to BT mode. A blue light will flash. Then use your phone or tablet to search for "DOUK AUDIO" or "DOUK AUDIO ST-01PRO", click and connect.
  • Q: Why does the Bluetooth playback lag or even disconnect? Why is the Bluetooth background noise/current noise obvious?
    A: Check if the Bluetooth antenna is installed correctly. Ensure there is no interference or blocking from devices like WiFi routers, wireless telephones, or FM radios (they may share frequency bands). Inductive loads (fans, refrigerators, air conditioners) can also cause interference. Ensure the device is not blocked or too far from the amplifier (more than 15 meters).
  • Q: Can the device be connected to my computer via Bluetooth? Why is there no sound when connected to PC?
    A: Computers often have poorer compatibility and more complex operations for Bluetooth than phones. Your computer needs Bluetooth functionality, updated drivers, and the output device must be set to Bluetooth after connection.
  • Q: How to clear Bluetooth pairing history?
    A: Switch to Bluetooth input mode, then short press the M2 button on the remote control.

Other Questions

  • Q: What type of power supply should be used?
    A: If you purchased the version with a power adapter, its output is sufficient. If you purchased without, or need higher output, prepare a high-quality, high-power adapter. The supported voltage range is DC 18–30V; exceeding 30V may damage the product.
  • Q: What's the function of the VU meter? What is the difference between a VU meter and a voltmeter, ammeter?
    A: A VU meter, voltmeter, and ammeter are all level indication meters. Some indicate voltage, some decibels, some current. The VU meter on this device indicates the level of the audio signal.
  • Q: How to adjust the sensitivity of the VU meter?
    A: The ST-01 PRO has a sensitivity adjustment for the VU meter on its bottom, allowing it to better match different input signals.
  • Q: Why does the input channel indicator light go out when adjusting the volume?
    A: When the volume is turned to minimum, the BT/USB indicator will flash. When turned to maximum, the PC-USB indicator will flash. At these times, the indicator of the current input channel will temporarily go out and will light up again when adjustment stops.
  • Q: Which functions can only be controlled via the remote control?
    A: The panel knobs control input modes, volume, bass, treble, and power on/off. All other functions, including clearing Bluetooth pairing, can only be operated via the remote control.

8. User Tips

  • Mobile Device Connectivity: For PC-USB input with mobile phones, Android systems require an OTG cable, and iOS systems require a camera kit. These accessories are not included.
  • Volume Indicator Behavior: When adjusting the main volume to its minimum or maximum, the input channel indicator light may temporarily go out and then relight once the adjustment stops. This is normal operation.
  • Burn-in Period: For optimal sound quality, especially with new speakers, allow the amplifier a 'burn-in' period of at least 10 hours.
  • Visual Appeal: Many users find the illuminated VU meter to be a captivating and addictive visual feature that enhances the audio experience.
  • Build Quality: The amplifier features a solid, full-metal body, contributing to its perceived durability and premium feel.
  • Sound Profile: The ST-01 PRO is noted for its warm, clear sound, offering a good balance between bass and treble, making it suitable for various music genres.

9. Maintenance

  • Vacuum Tube Care: Vacuum tubes are high-resistance components susceptible to interference. Keep the amplifier as far as possible from RF or electromagnetic interference sources and avoid strong vibrations. Tubes generate heat during operation, so ensure adequate ventilation and heat dissipation around the unit.
  • Vacuum Tube Replacement: The default vacuum tubes are 5725. Compatible replacement models include 6J1, 6J2, 6J3, 6J4, 6J5, 6*1N, 6*4N, 6*5N, 5654/5654W, 6AK5, EF95, 6BA6, 403B, etc. The service life of vacuum tubes is approximately 4000-4500 hours. They are not easily broken unless damaged by external forces. Always confirm compatibility before replacing tubes.

10. Warranty and Support

For product support, warranty inquiries, or technical assistance, please contact Douk Audio through the following channels:

  • Website: www.doukaudio.com
  • Email: nobsound@doukaudio.com
  • WeChat/Whatsapp: +86-17704028602
  • Address: Room A304, Chunenghui, Digital Economy Industrial Base, No. 9, Baoye Road, Guanhu Street, Longhua District, Shenzhen, Guangdong, China
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.