AYINO HD820B

Contents

AYINO HD820B 5.1CH Audio Converter Decoder Instruction Manual

Model: HD820B (HD820PRO)

1. Introduction

The AYINO HD820B is a versatile 5.1CH Audio Converter Decoder designed to enhance your audio experience by decoding various digital audio formats and providing multiple input and output options. It supports high-resolution video up to 4K@60Hz and features Bluetooth 5.0 for wireless audio streaming. This manual provides detailed instructions for setting up, operating, and maintaining your device.

2. Key Features

  • Multiple Inputs: Supports 1x HDMI2.0, 1x Coaxial, 1x Optical, 1x PC-USB, 1x AUX, and 1x USB 2.0 input.
  • Simultaneous Outputs: Provides 1x HDMI (ARC) output, 1x Optical output, 1x Coaxial output, and 1x 5.1ch analog audio output (RCA).
  • Audio Decoding: Decodes all signal sources (HDMI/ARC/Coaxial/Optical/PC-USB/USB) to 5.1ch output.
  • Bluetooth 5.0: Integrated Bluetooth 5.0 audio receiver for wireless connectivity.
  • High-Resolution Video: HDMI2.0 resolution up to 4Kx2K@60Hz, with 3D support.
  • Supported Audio Formats: DTS HD, DTS, DTS-ES, Dolby Atmos, AC3, WAV, FLAC, APE, HDCD, AAC, WMV, MP3, M4A, etc.
  • Output Modes: Supports 5.1ch/2.0ch output modes (FL/FR active in 2.0ch mode).
  • Control Options: Switch input sources via front panel buttons or IR remote control.
  • Volume Adjustment: IR remote control supports volume adjustment.
  • Power-Off Memory: Automatically switches to the last used signal channel and remembers USB broadcast position.
  • Firmware Upgradable: Allows for future firmware updates.
  • Wide Voltage Power Supply: Uses DC 12V/1A external power adapter, compatible with DC (5-19V) power supply.

3. Package Contents

Please check the box for the following items:

  • HD820 Audio Decoder x1
  • DC-12V/1A Power Adapter x1
  • Digital Optical Cable x1
  • Digital Coaxial Cable x1
  • RCA Cable x3
  • Remote Control x1
  • Bluetooth Antenna x1
  • PC-USB Cable x1
Image showing the HD820B decoder and all included accessories: power adapter, optical cable, remote control, RCA cables, USB cable, coaxial cable, and BT antenna.
Figure 1: HD820B Decoder and Accessories

4. Product Overview

4.1 Front Panel Definition

Diagram of the HD820B front panel with numbered labels for each port and button.
Figure 2: Front Panel Layout
  1. Power button
  2. U disk and PC-USB interface
  3. ARC mode LED
  4. HDMI-Compatible mode LED
  5. Optical fiber mode LED
  6. Coaxial mode LED
  7. Bluetooth mode LED
  8. PC-USB sound card mode LED
  9. U disk mode LED
  10. Channel mode LED
  11. IR receive port
  12. Input switch key
  13. U disk to play the previous song key (long press for volume down)
  14. U disk to play the next song key (long press for volume up)

4.2 Rear Panel Definition

Diagram of the HD820B rear panel with numbered labels for each port.
Figure 3: Rear Panel Layout
  1. Bluetooth 5.0 antenna port
  2. SW (Subwoofer) channel output
  3. CEN (Center) channel output
  4. SR (Surround Right) channel output
  5. SL (Surround Left) channel output
  6. FR (Front Right) channel output
  7. FL (Front Left) channel output
  8. Coaxial input port
  9. Optical input port
  10. HDMI-Compatible input port
  11. HDMI-Compatible output port (ARC)
  12. DC-12V Power input port

5. Setup Instructions

5.1 Power Connection

  1. Connect the provided DC 12V/1A power adapter to the DC-12V Power input port (12) on the rear panel of the HD820B.
  2. Plug the power adapter into a suitable wall outlet.

5.2 Input Connections

Connect your audio/video sources to the HD820B using the appropriate cables:

  • HDMI Input: Connect your game player, set-top box, projector, or PC to the HDMI-Compatible input port (10) using a 19-core standard HDMI cable.
  • Optical/Coaxial Input: Connect digital audio sources to the Optical input port (9) or Coaxial input port (8).
  • PC-USB Input: Connect your PC to the PC-USB interface (2) on the front panel using the PC-USB cable.
  • AUX Input: Connect analog audio sources to the AUX input (not explicitly numbered but implied by features).
  • USB 2.0 Input: Insert a U disk (up to 128GB, FAT32 format) into the USB 2.0 interface (2) on the front panel for media playback.
  • Bluetooth Antenna: Screw the Bluetooth antenna into the Bluetooth 5.0 antenna port (1) on the rear panel for wireless audio reception.
Diagram illustrating multi-device compatibility and input/output connections for the HD820B, showing connections from game players, set-top boxes, projectors, PCs, U-disks, and smart TVs to 2.0 stereo, amplifiers, and 5.1 theater systems.
Figure 4: Multi-Device Compatibility and Connections

5.3 Output Connections

Connect the HD820B to your audio system:

  • 5.1CH Analog Audio Output: Connect the SW, CEN, SR, SL, FR, and FL RCA outputs (2-7) on the rear panel to your 5.1 channel amplifier or active speaker system using RCA cables.
  • HDMI (ARC) Output: Connect the HDMI-Compatible output port (ARC) (11) to your Smart TV's HDMI ARC input for audio return channel functionality.
  • Optical/Coaxial Output: If desired, connect external audio devices to the Optical output or Coaxial output (these are not explicitly shown as separate outputs on the rear panel diagram but mentioned in features).
Diagram showing two examples of 5.1ch interface connections: one to an amplifier using RCA cables and another to a speaker system with a 3.5mm jack input.
Figure 5: 5.1ch Interface Connection Examples

6. Operation

6.1 Power On/Off

Press the Power button (1) on the front panel or the power button on the remote control to turn the device on or off.

6.2 Input Source Switching

Press the Input switch key (12) on the front panel or the corresponding input buttons (AUX, USB, COX, OPT, HDMI, ARC, BT, PC) on the remote control to select your desired audio source. The corresponding LED on the front panel will illuminate.

6.3 Volume Control

Use the VOL+ and VOL- buttons on the remote control to adjust the master volume. When playing from a U disk, a long press on the previous/next song keys (13, 14) on the front panel will also adjust the volume.

6.4 USB Playback

Insert a U disk with supported audio files into the USB 2.0 interface (2). The device will automatically start playing. Use the previous/next song keys (13, 14) on the front panel or the remote control to navigate tracks.

6.5 Remote Control Learning Function

The remote control features 6 gray custom learning keys (P1, P2, Bas+, Bas-, Tre+, Tre-, Fms+, Fms-, 2.0/5.1, PCUSB) that can learn infrared remote control functions from your TV or power amplifier.

Detailed diagram of the remote control with instructions for its learning function.
Figure 6: Remote Control Learning Function
  1. Long press the 'OK' button for about 3 seconds; the red LED light will stay on to enter the learning state.
  2. Press the learning button (one of the gray keys); the LED flashes, indicating the learning receiving state.
  3. Ensure the two remote control transmitters are separated by 1-3 cm. After aligning, press the button you want to learn on the TV remote control and hold it for about 2 seconds.
  4. If learning is successful, the LED flashes three times quickly and then keeps on continuously.
  5. Repeat steps 2-3 until all the keys on the TV remote control have been learned.
  6. If no operation occurs after about 1 minute, it will automatically exit the learning state. If the learning button cannot operate, try normal operation.
  7. Note: The two remote controls must be kept stable during the learning operation and must not be shaken.
Video 1: Product demonstration showing the device and its features.

7. Decoding Modes

The HD820B supports both hardware and software decoding for various audio formats:

Flowchart illustrating the audio decoding process: Audio Source -> Auto Detect -> DTS/AC3 or PCM. DTS/AC3 leads to Hardware Decoder for Real 5.1. PCM leads to Software Decoder for Virtual 5.1. Both lead to Output module and 5.1CH Interface.
Figure 7: Hard or Soft Decoding Process
  • Hardware Decoding (Real 5.1): For DTS/AC3 audio sources, the device utilizes a hardware decoder to achieve true 5.1 channel surround sound.
  • Software Decoding (Virtual 5.1): For PCM audio sources, a software decoder is used to provide virtual 5.1 channel output.

8. Compatibility

8.1 Device Compatibility

The HD820B is compatible with a wide range of devices, including:

  • Game players
  • Set-top boxes
  • Projectors
  • Personal Computers (PCs)
  • Smart TVs (via HDMI ARC)
  • U Disks (USB storage devices)

8.2 Operating System Compatibility (PC-USB)

When connected via PC-USB, the device is compatible with the following operating systems:

  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 10
  • Windows Vista
  • Android
  • OSX (macOS)
Diagram showing the HD820B connected to various devices including Android phones, iPhones/iPads, Windows PCs, and Mac OS laptops, illustrating multi-device compatibility.
Figure 8: Multi-Device and OS Compatibility

9. Specifications

FeatureSpecification
Brand NameAYINO
Model NumberHD820PRO
TypeDesktop
MaterialMetal
InputsUSB Type-A, Optical (SPDIF), Coaxial, HDMI, AUX
OutputsRCA (5.1ch analog), HDMI (ARC), Optical, Coaxial
BluetoothYes (Bluetooth 5.0)
HDMI ResolutionUp to 4Kx2K@60Hz, supports 3D
PCM Sampling Frequencies44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
PCM Word Length16-bit, 24-bit
DSD Sampling Frequencies2.8224 MHz (DSD64), 5.6448 MHz (DSD128)
USB CompatibilityWindows 7, Windows 8, Windows 8.1, Windows 10, Windows Vista, Android, OSX
Power SupplyDC 12V/1A (supports DC 5-19V)
CertificationCE
OriginMainland China
Product DimensionsApprox. 205mm (L) x 70mm (W) x 28.6mm (H)
Package Weight0.6 kg

10. Troubleshooting

If you encounter issues with your HD820B, please refer to the following common problems and solutions:

  • No Sound Output:
    • Ensure the power adapter is correctly connected and the device is powered on.
    • Verify that the correct input source is selected on the HD820B (check the front panel LEDs).
    • Check all audio cable connections (RCA, Optical, Coaxial, HDMI ARC) to ensure they are secure and connected to the correct ports on both the HD820B and your audio system.
    • Confirm that your amplifier or active speakers are powered on and set to the correct input.
    • Adjust the volume on both the HD820B and your audio system.
  • Device Cannot Decode DTS/AC3 Audio:
    • Ensure your audio source is outputting DTS or AC3 format. Some devices may default to PCM. Check your source device's audio settings.
    • Verify that the input signal is indeed DTS/AC3. If the source is PCM, the device will perform software decoding to virtual 5.1.
  • Poor Sound Quality:
    • Check the quality of your input audio source.
    • Ensure all cables are high quality and properly connected.
    • For HDMI connections, use a 19-core standard HDMI cable.
    • Consider the distance for Bluetooth connections; ensure the external antenna is properly attached for optimal range.
  • Remote Control Not Responding:
    • Check the battery in the remote control.
    • Ensure there are no obstructions between the remote and the IR receive port (11) on the front panel.
Image depicting various common sound quality and compatibility issues users might face with audio devices.
Figure 9: Common Sound Quality Concerns

11. User Tips

  • For optimal video and audio performance, always use a high-quality 19-core standard HDMI-compatible cable.
  • When connecting to a PC via USB, ensure your operating system drivers are up-to-date for the best compatibility.
  • If you need true 5.1CH audio, verify that your source material is encoded in a 5.1CH format like DTS or AC3. Many streaming services or media players might output PCM by default, which will be decoded as virtual 5.1.
  • Take advantage of the remote control's learning function to consolidate control of your home theater system.

12. Warranty and Support

For any technical assistance, warranty claims, or inquiries regarding firmware updates, please contact AYINO customer service through your purchase platform. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.