Yieryi TPH01814

Contents

Yieryi 2-in-1 Soil pH and Moisture Meter

Model: TPH01814

1. Introduction

The Yieryi TPH01814 is a portable 2-in-1 soil meter designed for quick and accurate detection of both soil pH and moisture levels. This device is an essential tool for gardeners, farmers, and plant enthusiasts to ensure optimal growing conditions for various plants, including greenhouse crops, vegetables, potted plants, and field crops. It operates without the need for batteries, offering a convenient plug-and-play experience with a clear, easy-to-read scale.

Yieryi 2-in-1 Soil Meter showing pH and Humidity functions
The Yieryi TPH01814 2-in-1 Soil Meter, capable of measuring both pH and humidity.

2. Specifications

FeatureDetail
Model NumberTPH01814
Display TypeAnalog
pH Measurement Range3 - 8 pH
pH Resolution±0.2 pH
pH Accuracy±0.2 pH (Suitable for agricultural field and classroom experiments)
Humidity Range1 - 8 (10% - 80%)
Operating Temperature5 ~ 50°C (41 ~ 122°F)
Dimensions142mm (probe length) * 50mm (body width) * 50mm (body height)
Battery RequiredNo
CertificationCE
ElectrodeWater-proof metal electrode

Soil pH Grade Reference:

  • <4.5 pH: Very strong acid
  • 4.5 ~ 5.5 pH: Strong acid
  • 5.5 ~ 6.5 pH: Acidic
  • 6.5 ~ 7.5 pH: Neutral
  • 7.5 ~ 8.5 pH: Alkaline

Soil Moisture Level Reference:

  • 1 ~ 3: Dry
  • 4 ~ 7: Suitable
  • 8 ~ 10: Wet
Diagram showing dimensions and pH/moisture scales of the soil meter
Dimensions and measurement scales of the Yieryi TPH01814 soil meter.
Soil pH grade chart with meter in soil
Visual representation of soil pH grades and the meter in use.
Soil moisture levels chart with meter in soil and watering can
Visual representation of soil moisture levels and the meter in use.

3. Setup

The Yieryi TPH01814 soil meter is designed for immediate use without any complex setup. It does not require batteries or calibration before its first use.

  1. Prepare the Soil: Ensure the soil to be tested is moist. If the soil is dry, water it thoroughly and wait for about 20-30 minutes before testing to allow the water to distribute evenly.
  2. Clean the Probe: Before each use, gently wipe the metal probe with a clean cloth to remove any residue from previous measurements.
Soil meter on a table with gardening tools, highlighting no battery needed
The meter's features, including no battery requirement and clear scale.

4. Operating Instructions

Follow these steps to accurately measure soil pH and moisture:

  1. Insert the Probe: Gently insert the metal probe into the soil clockwise until the entire metal part is in full contact with the soil. Ensure the soil is compacted around the probe for accurate readings.
  2. Wait for Stabilization: Allow the meter to remain in the soil for a few minutes (typically 10-15 minutes) until the needle on the dial stabilizes.
  3. Read the Value: Read the pH or moisture value directly from the analog dial.
  4. Multi-Point Measurement: For a more comprehensive understanding of your soil, take multiple measurements in different spots within the area and calculate an average value.
  5. Switching Modes: The meter features a button on its body to switch between pH and humidity measurement modes. Press and hold this button to toggle between the two modes.
Step-by-step guide on how to use the soil tester
Visual guide for inserting the meter, waiting for stabilization, and multi-point measurement.
Close-up of the PH/Humidity switch button and metal electrode
Detail of the PH/Humidity mode switch button and the metal electrode.

5. Maintenance

Proper maintenance ensures the longevity and accuracy of your soil meter:

  • Probe Contact: Always ensure the metal probe is in full contact with the soil and that the soil is compacted around it during measurement.
  • Handle with Care: When inserting the electrode, do not use excessive force, as this can easily damage the probe.
  • Clean After Use: After each measurement, immediately clean any soil particles from the surface of the probe. Use a soft, damp cloth to wipe it clean.
  • Storage: Keep the probe dry and store the meter in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • Inaccurate or Unstable Readings:
    • Ensure the soil is adequately moist. Dry soil can lead to inaccurate readings.
    • Verify that the metal probe is fully inserted into the soil and that the soil is compacted around it to ensure good contact.
    • Clean the probe thoroughly before and after each use to prevent residue buildup affecting conductivity.
  • No Reading or Stuck Needle:
    • Check if the probe is inserted deep enough into the soil. The entire metal part must be submerged.
    • Ensure the soil is not too dry. If it is, water the soil and wait before re-testing.
    • Confirm the mode switch button is correctly set to either pH or Humidity, depending on your desired measurement.
  • Difficulty Switching Modes:
    • The mode is switched by pressing and holding the button on the meter's body. There is no 'sticking out' switch for pH measurement; the single button toggles between pH and humidity.

7. User Tips

  • Soil pH Importance: Soil pH is crucial for crop quality. Most plants thrive within specific pH ranges. Use the meter to determine your soil's condition and adjust it effectively for optimal growth.
  • Moisture Management: The moisture reading helps prevent over or under-watering, which are common causes of plant stress.
  • Versatile Use: This meter is suitable for a wide range of applications, including vineyards, orchards, field produce, nursery planters, lawn maintenance, home gardens, and potted plants.
  • Consistency is Key: For best results, take measurements at the same time of day and under similar soil conditions.
Images showing the soil meter being used in various planting scenarios
The Yieryi soil meter is widely used for various soil moisture detection in different planting environments.
Person using the soil meter with a potted plant
Portable measurement for comprehensive care of all kinds of flowers and crops.

8. Warranty and Support

Yieryi products are designed for reliability and durability, passing strict quality and safety standards. For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer directly. Refer to the product packaging or the official Yieryi website for specific contact information.

Yieryi brand story image showing various products
Yieryi brand overview, showcasing a range of measurement instruments.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.