FLYDIGI CyberFox X1

Contents

FlyDiGi CyberFox X1 Bluetooth Wireless TWS Earphones Instruction Manual

Model: CyberFox X1

1. Introduction

Welcome to the FlyDiGi CyberFox X1 experience. These True Wireless Stereo (TWS) Bluetooth earphones are engineered for high-performance, offering ultra-low latency, superior sound quality, and extended battery life, making them ideal for mobile gamers and general entertainment users. This manual provides essential information for setting up, operating, and maintaining your CyberFox X1 earphones.

FlyDiGi CyberFox X1 TWS Earphones in Grey and Neon Yellow with their charging cases
FlyDiGi CyberFox X1 TWS Earphones and Charging Cases

2. Package Contents

Please check the box for the following items:

  • FlyDiGi CyberFox X1 TWS Earphones (Left and Right)
  • Charging Case
  • USB Charging Cable
  • User Manual (this document)

3. Specifications

The FlyDiGi CyberFox X1 earphones boast advanced features for an immersive audio experience:

FeatureDescription
Brand NameFLYDIGI
ModelCyberFox X1
CommunicationWireless (Bluetooth)
Bluetooth Version5.0
Wireless TypeBluetooth
StyleIn-ear
Earcups TypeSealed
Vocalism PrincipleBalanced Armature
Driver Diameter13.4 mm (Large Dynamic Coil)
Sensitivity32 dB (High Sensitivity)
Impedance Rangeup to 32 Ω
Frequency Response Range20 - 20000 Hz
Active Noise-CancellationYes
ENC Call Noise ReductionYes
With MicrophoneYes
Control ButtonYes
Volume ControlYes
Support APPYes (Feizhi exclusive app)
WaterproofYes
Low Latency50ms (3rd generation Foxspeed™ technology)
Single Earphone Battery LifeUp to 6 hours
Total Battery Life (with case)Up to 30 hours
Charging MethodCharging case
MaterialPlastic
Headphone Pads MaterialFabric
Magnet TypeFerrite
OriginMainland China
Comparison table of CyberFox X1 with other headphones regarding delay, sound quality, and battery endurance.
Performance Comparison: CyberFox X1 vs. Other Headphones
Diagram illustrating the 13.4mm large moving coil and high sensitivity of the CyberFox X1 for high sound quality.
High Sound Quality Features: 13.4mm Large Moving Coil

4. Setup Guide

4.1 Charging the Earphones and Case

Before first use, fully charge the earphones and charging case.

  1. Place the earphones into the charging case.
  2. Connect the charging case to a USB power source using the provided USB cable.
  3. The indicator light on the case will show charging status. A full charge typically takes a few hours.

4.2 Bluetooth Pairing

  1. Ensure the earphones are charged and placed in the charging case.
  2. Open the charging case lid. The earphones will automatically enter pairing mode (indicator lights may flash).
  3. On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn Bluetooth on.
  4. Search for available devices and select "FlyDiGi CyberFox X1" from the list.
  5. Once connected, the earphones will indicate successful pairing (e.g., a voice prompt or steady light).
  6. For subsequent use, the earphones will automatically connect to the last paired device when taken out of the case.

4.3 App Connection (Feizhi Exclusive App)

For advanced features and customization, download the Feizhi exclusive app on your smartphone. The app allows for OTA updates, switching delay settings, reading power, and adjustable EQ.

  1. Download and install the "Feizhi" app from your device's app store.
  2. Open the app and follow the on-screen instructions to connect your CyberFox X1 earphones.
Screenshot of the Feizhi app interface showing earphone connection status and sound mode selection.
Feizhi App Interface for Earphone Control

5. Operating Instructions

5.1 Power On/Off

  • Power On: Open the charging case, and the earphones will automatically power on.
  • Power Off: Place the earphones back into the charging case and close the lid. They will automatically power off and begin charging.

5.2 Touch Controls

The CyberFox X1 earphones feature intuitive touch controls. Specific functions can often be customized via the Feizhi app.

  • Play/Pause: Single tap on either earphone.
  • Answer/End Call: Single tap on either earphone.
  • Next Track: Double tap on the right earphone.
  • Previous Track: Double tap on the left earphone.
  • Activate Voice Assistant: Triple tap on either earphone (may vary).
  • Volume Control: Adjust via your connected device or customize through the app.

5.3 Switching Modes (Low Latency / Normal)

The CyberFox X1 offers a dedicated low-latency mode for gaming. This can typically be switched via touch control or through the Feizhi app.

  • Low Latency Mode: Optimized for gaming, reducing audio delay to 50ms.
  • Normal Mode: Standard audio mode for music and calls.

Refer to the Feizhi app for precise instructions on switching between modes, as this may be configurable.

Diagram showing the internal components of the earphone and highlighting the 50ms ultra-low delay technology.
50ms Ultra-Low Latency Technology for Gaming

5.4 Wearing the Earphones

The CyberFox X1 features an ergonomic semi in-ear design for comfortable wear throughout the day.

  1. Gently insert each earphone into your ear canal.
  2. Adjust for a snug and comfortable fit to ensure optimal sound quality and noise isolation.
Two individuals wearing the FlyDiGi CyberFox X1 earphones, demonstrating the comfortable in-ear fit.
Ergonomic Semi In-Ear Design for Comfort

6. Maintenance

6.1 Cleaning

  • Regularly clean the earphones and charging case with a soft, dry, lint-free cloth.
  • Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Gently remove any earwax or debris from the earphone tips and speaker mesh using a small, soft brush or cotton swab.

6.2 Storage

  • When not in use, always store the earphones in their charging case to protect them and ensure they are charged for next use.
  • Store in a cool, dry place, away from extreme temperatures and direct sunlight.

6.3 Waterproof Feature

The CyberFox X1 earphones are waterproof, making them resistant to sweat and light splashes. However, they are not designed for swimming or submersion in water. Ensure they are dry before placing them back in the charging case.

A person with wet hair wearing the CyberFox X1 earphone, demonstrating its waterproof and sweat-proof capabilities.
Waterproof and Sweat-Proof Design

7. Troubleshooting

If you encounter any issues with your CyberFox X1 earphones, try the following solutions:

  • Earphones not pairing/connecting:
    • Ensure both earphones are charged.
    • Turn off and on your device's Bluetooth.
    • Forget the device in your Bluetooth settings and re-pair.
    • Place earphones back in the case, close the lid, wait a few seconds, then open to re-initiate pairing mode.
  • No sound from one or both earphones:
    • Check the volume level on your connected device.
    • Ensure earphones are properly seated in your ears.
    • Re-pair the earphones.
  • Noise Cancellation not working effectively:
    • Ensure earphones are properly seated to create a good seal.
    • Check for any obstructions on the microphone ports.
    • Verify Active Noise-Cancellation is enabled via touch control or the Feizhi app.
  • Sound leakage (others can hear your audio):
    • The CyberFox X1 features a sealed earcups type and sound isolating design to minimize leakage. Ensure a proper fit in your ear.
    • Lower the volume if necessary.
  • App not connecting or updating:
    • Ensure your phone's Bluetooth is on and the earphones are connected.
    • Check for updates to the Feizhi app in your app store.
    • Restart the app and your phone.

8. User Tips

  • Optimize for Gaming: Always activate the low-latency game mode via the Feizhi app or touch controls for the best gaming experience, especially for competitive titles where audio timing is crucial.
  • Custom Sound: Utilize the Feizhi app's adjustable EQ feature to fine-tune the sound profile to your personal preference for different types of music or games.
  • Extended Use: With 6 hours of single earphone battery life and 30 hours total with the charging case, remember to regularly place your earphones back in the case when not in active use to maximize their endurance.
  • Clear Communication: The ENC (Environmental Noise Cancellation) for calls ensures clear voice transmission even in noisy environments.
Graphic illustrating the high endurance of the CyberFox X1: 30 hours total battery life, 6 hours single use, and quick charging capability.
High Endurance: 30 Hours Total Battery Life

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official FlyDiGi website or contact your retailer. Keep your proof of purchase for any warranty claims.

© 2023 FLYDIGI. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.