1. Product Overview
The yakjsp PM-Pro is a versatile RFID IC/ID Copier Duplicator designed for reading and writing various types of RFID cards and tags. It supports both low-frequency (125KHz) and high-frequency (13.56MHz ISO1443A) standards, including encrypted cards. This device is compact, portable, and connects via USB to a computer for software-based operation.
2. Package Contents
Ensure all the following items are included in your package:
- 1 x PM-Pro Reader Writer device
- 1 x USB Cable
- 1 x 13.56MHz IC Card
- 1 x 125KHz ID Tag
- 1 x 13.56MHz Writable UID IC Card
- 1 x 13.56MHz Writable UID IC Tag
- 1 x 125KHz Writable ID Card
- 1 x 125KHz Writable ID Tag
3. Specifications
| Feature | Description |
|---|---|
| Model Number | PM-Pro |
| Brand Name | yakjsp |
| Type | ID |
| Interface | USB |
| Supported Read/Write Frequencies | 125KHz, 250KHz, 500KHz, 375KHz, 625KHz, 750KHz, 875KHz, 1000KHz, 13.56MHz (ISO1443A) |
| Supported Read Cards | EM4100 / EM4200, Mifare Classic, UID, S50, S70 |
| Supported Write Cards | T5577, EM4305, Mifare UID CUID FUID |
| Supported Operating Systems | Windows XP, Windows 7, Windows 8, Windows 10 |
| Features | Sector data editable, cracks most card encryption, analog phone NFC support, small and portable, contactless card reading. |
4. Setup Guide
- Connect the Device: Connect the PM-Pro RFID Copier Duplicator to your computer using the provided USB cable. The device should be recognized automatically by your operating system (Windows XP/7/8/10).
- Install Software: Install the decoding software (e.g., "NFC-PM3-V1 decoding software" as seen in the video/images) on your Windows computer. This software is typically provided with the device or available for download from the manufacturer's website.
- Launch Software: Launch the installed software. Ensure the device status shows "Connected" within the software interface.
5. Operating Instructions
5.1 Reading an RFID Card/Tag
- Place the card or tag you wish to read on the designated "IC READ" or "ID READ" area of the PM-Pro device, depending on its type (IC for 13.56MHz, ID for 125KHz).
- In the software, navigate to the "LowFreqCard" tab for ID cards or "HighFreqCard" tab for IC cards.
- Click the "Read" button corresponding to the card type.
- The software will display the card's data. For IC cards, it may also show decoding progress and sector data.
5.2 Writing to an RFID Card/Tag
- After successfully reading a source card, ensure the data is displayed in the software.
- Place a compatible writable card or tag (e.g., T5577, EM4305, Mifare UID CUID FUID) on the appropriate "IC READ WRITE" or "ID READ WRITE" area of the PM-Pro device.
- In the software, select the desired write function (e.g., "Write T5577/520" for ID cards, "Write IC" for IC cards, or "Write IC blank" to write to a blank IC card).
- Confirm the write operation. The software will indicate "Write card successfully!" upon completion.
5.3 Editing Sector Data (for IC Cards)
For advanced users, the software allows editing of sector data for IC cards. After reading an IC card, the decoded blocks will be displayed. You can modify these blocks directly within the software interface before writing to a new card.
6. Maintenance
- Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble the device, as this will void any warranty and may cause damage.
- Store the device and cards in a safe place when not in use.
7. Troubleshooting
- Device not recognized by computer:
- Ensure the USB cable is securely connected to both the device and the computer.
- Try a different USB port on your computer.
- Restart your computer.
- Check if the necessary drivers are installed (usually part of the software installation).
- Card read/write failure:
- Ensure the card is placed correctly on the corresponding read/write area (IC or ID).
- Verify that the card type is supported by the PM-Pro device (refer to Specifications).
- For writing, ensure you are using a compatible writable card/tag.
- Some encrypted cards may require advanced decoding techniques; ensure the software is up-to-date and capable.
- Try cleaning the card and the device's reading surface.
- Software issues:
- Ensure your operating system is supported (Windows XP/7/8/10).
- Reinstall the software.
- Check for software updates from the manufacturer.
8. User Tips
- Always ensure the PM-Pro device is securely connected to your computer via USB before launching the software.
- When reading or writing, place the card firmly and centrally on the designated area for optimal performance.
- For encrypted IC cards, the software may offer "Brute Attack" or "Known Key" decoding options. Use these features carefully and only when legally permitted.
9. Frequently Asked Questions
- Q: Does this device have a specific model number?
- A: Yes, the model number for this device is PM-Pro.
- Q: What type of item is this?
- A: This is an ID type device, specifically an RFID IC/ID Copier Duplicator.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.