ANRAN R4S-3

Contents

IPC Router Wireless Repeater User Manual

Model: ANRAN R4S-3

1. Introduction

The ANRAN R4S-3 IPC Router is a wireless repeater designed to extend the WiFi range for home security camera systems, specifically compatible with Misecu Wireless Security Camera Systems. It functions as a WiFi signal booster for 2.4G wireless IPC (IP Cameras), enhancing signal strength and transmission distance. This device can also convert wired NVR systems to wireless and facilitate wireless pairing with IP cameras.

IPC Router features: Support 2.4GHz IPC, Wireless Repeater, Extend Signal range, Quick Match code

Figure 1: Key Features of the IPC Router

2. Package Contents

Upon opening the package, verify that all items are present and in good condition.

Video 1: Unboxing the IPC Router and its accessories.

The standard package typically includes:

  • 1 x ANRAN R4S-3 IPC Router
  • 1 x Power Adapter
  • Mounting screws and anchors
  • User Manual (this document)

Note: While a power adapter is shown in the unboxing video, some product descriptions indicate it might not be included. Please check your specific package contents carefully.

3. Device Overview

Familiarize yourself with the components and interfaces of the IPC Router.

Detailed diagram of the IPC Router's ports and indicators: Antenna, Indicator lights, Match Code/reset button, Network port, Speaker, Power.

Figure 2: IPC Router Interface Diagram

  1. Antenna: Used for transmitting and receiving wireless signals.
  2. Indicator Lights: 5 LED indicators. 4 indicate IPCAM connection status, and 1 indicates NVR connection status.
  3. Match Code/Reset Button: Used to trigger code matching and reset functions.
  4. Network Port (RJ45 100Mbits): Connects to NVR or a network switch.
  5. Speaker: Provides warning tones, for example, during code matching.
  6. Power Supply Port (12V): Connects to the power adapter for equipment power.
Side view of the IPC Router with dimensions (30mm, 57mm, 94mm, 170mm).

Figure 3: IPC Router Dimensions

4. Setup and Installation

The IPC Router can be used in various configurations to extend your wireless security camera system's range.

4.1. Wireless Repeater Function

Use the IPC Router to extend the wireless signal between your NVR and IP cameras, especially when cameras are far from the NVR or separated by obstacles.

Diagram showing the IPC Router acting as a wireless repeater between an NVR and two cameras, and also converting a wired NVR to wireless for multiple cameras.

Figure 4: Wireless Repeater and Wired NVR to Wireless Conversion

Steps:

  1. Place the IPC Router strategically between your NVR and the IP cameras that have weak signals.
  2. Connect the IPC Router to its 12V power supply.
  3. Initiate the code matching process (see Section 5.1) to pair the IPC Router with your NVR and cameras.
  4. Ensure the NVR and IPCAM status lights indicate a successful connection.
Diagram illustrating signal extension through walls. Top shows signal loss without the booster, bottom shows enhanced signal with the booster.

Figure 5: Signal Extension through Obstacles

4.2. Converting Wired NVR to Wireless

The IPC Router can enable a wired NVR to connect wirelessly to IP cameras.

Steps:

  1. Connect the wired NVR to the IPC Router's Network Port using an Ethernet cable.
  2. Connect the IPC Router to its 12V power supply.
  3. Initiate the code matching process (see Section 5.1) to pair the IPC Router with your IP cameras.
  4. The NVR will now receive video feeds from the wirelessly connected cameras via the IPC Router.
Diagram showing the IPC Router extending coverage for multiple cameras around a house.

Figure 6: Extended Coverage for Home Security

Top-down view of an office layout with multiple cameras, a router, and the IPC Router, showing extended wireless connections covering the entire area.

Figure 7: IPC Router in an Office Environment

5. Operating Instructions

5.1. Code Matching / Reset Key

This button is crucial for pairing the IPC Router with your cameras and NVR.

  • To enter Camera Code Matching State: Press and hold the "reset / sync" key for 3 seconds (but less than 10 seconds) and then release it. The IPC Router will enter the camera code matching state, and all IPCAM status lights will flash simultaneously.
  • To enter NVR Wireless Code Matching State: Press and hold the "reset / sync" key for 10 seconds or more and then release it. The IPC Router will enter the NVR wireless code matching state, and the NVR status light will flash rapidly.

5.2. Indicator Lights

The LED indicators provide important status information:

NVR Status Light:

  • Flashing: IPC Router is in the process of code matching with the wireless NVR.
  • Always On: The IPC Router is successfully paired, and the wireless connection to the NVR is normal.
  • Slow Flash: The IPC Router is paired, but the wireless connection is disconnected or not in the paired state.
  • Off: The IPC Router equipment is abnormal and requires checking.

IPCAM Status Lights (4 lights):

  • Always On: Indicates that a specific camera is connected to the IPC Router. Multiple lights on mean multiple cameras are connected (up to 4).
  • Flashing Simultaneously: The IPC Router is in the camera code matching state.

6. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Ensure proper ventilation around the device to prevent overheating.
  • Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

7. Troubleshooting

Device is not extending WiFi range / "no way he's not expanding"
  • Placement: Ensure the IPC Router is placed optimally between the NVR and the cameras. Walls and other obstacles can significantly reduce signal strength. Try repositioning the router.
  • Power: Verify the device is properly powered on and receiving stable power.
  • Code Matching: Re-perform the code matching process for both the NVR and the cameras to ensure they are correctly paired with the IPC Router.
  • NVR Status Light Off: If the NVR status light is off, the equipment is abnormal. Check power and connections.
Cameras are not connecting or signal is unstable
  • IPCAM Status Light: Check the IPCAM status lights. If they are not solid green (or equivalent for "always on"), re-initiate camera code matching.
  • Distance/Obstacles: Reduce the distance between the IPC Router and the cameras, or remove any major obstructions.
  • Interference: Other 2.4GHz devices (e.g., microwaves, cordless phones) can cause interference. Try to minimize these or change their channels if possible.
Compatibility Issues
  • System Requirement: This WiFi Range Extender is specifically designed to work with the Misecu Wireless Security Camera System. It may not be compatible with other brands or systems. Please verify your system's compatibility.

8. Specifications

FeatureDetail
ModelR4S-3
WIFI Standard802.11b/g/n 2.4G
Supported IPCsUp to 4 wireless IPCs
Indicator Lights5 LEDs (4 for IPCAM connection, 1 for NVR connection)
Interface Type1 x RJ45 100Mbits Network Port
Control Buttons1 x Code Matching / Reset Key
Power Supply1 x 12V Power Input
Dimensions (L x W x D)74 x 31 x 186 mm
OriginMainland China
CertificationNONE

9. User Tips

  • Optimal Placement: For best signal extension, place the IPC Router in a line of sight between your NVR and the furthest cameras, minimizing physical obstructions like thick walls.
  • Compatibility Check: Always confirm that your existing security camera system is a Misecu Wireless Security Camera System to ensure full compatibility and functionality.
  • Power Adapter: While some packages include a power adapter, it's advisable to confirm its presence or acquire a compatible 12V power adapter if needed.

10. Frequently Asked Questions (FAQ)

Q: Will this IPC Router work with my Hiseeu WiFi camera set?
A: This WiFi Range Extender is specifically designed to work with the Misecu Wireless Security Camera System. Compatibility with other brands like Hiseeu is not guaranteed and may not function as intended.
Q: Does it work with ONVIF cameras?
A: While the device supports network cable pairing with network port wireless IPC, the manufacturer explicitly states that this extender "only works with the Misecu Wireless Security Camera System." Therefore, compatibility with generic ONVIF cameras outside of a Misecu system cannot be assured.
Q: Does it work with ANRAN cameras?
A: The product title includes "ANRAN Wifi Signal Booster," suggesting it's an ANRAN branded product. However, the critical compatibility note specifies "Misecu Wireless Security Camera System." If your ANRAN cameras are part of a Misecu system, it should work. Otherwise, compatibility is not guaranteed.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. An additional user manual in PDF format may be available from the seller's item guides and documents section.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.