EUDAX DCXQTZ

Contents

EUDAX School Physics Labs Basic Electricity Discovery Circuit and Magnetism Experiment Kit

Model: DCXQTZ | Brand: EUDAX

Introduction

This user manual provides detailed instructions for the EUDAX School Physics Labs Basic Electricity Discovery Circuit and Magnetism Experiment Kit. Designed for junior and senior high school students, this kit facilitates hands-on learning of fundamental principles in electricity and magnetism. It includes a wide array of components to conduct various experiments, from simple circuit assembly to understanding electromagnetic phenomena.

Video: Overview of the EUDAX Physics Experiment Kit components and basic functionality.

Kit Components

The kit includes the following equipment and accessories:

Full EUDAX Physics Experiment Kit contents

Image: All components included in the EUDAX School Physics Labs Basic Electricity Discovery Circuit and Magnetism Experiment Kit.

  • Voltmeter
  • Ammeter
  • Battery pack
  • Single / double pole switch
  • Lampholder
  • Solar photovoltaic panel
  • Single pole switch
  • Constant resistance
  • Copper guide rail
  • Open motor
  • Hand generator
  • Unknown resistance
  • Sliding rheostat
  • Solar motor
  • Buzzer
  • Compass
  • Light-emitting diode (LED)
  • Magnet car
  • Electromagnet
  • Bell laboratory (likely components for a bell experiment)
  • Multifunctional car
  • U-magnet
  • Bar magnet
  • Ring magnet
  • Copper / zinc electrodes
  • Experimental bulb (2.5V, 3.8V)
  • Law of electrons (likely components for demonstrating electron flow)
  • Iron powder box
  • Alligator clip wire
  • U-shaped cross conductor
  • Maintenance tools (screwdriver, wrench)
  • Friction rod suit
  • Lab widgets (various small parts)

Specifications

AttributeValue
NameElectromagnetic experiment box set
Model NumberDCXQTZ
TypeElectromagnetic experiment box set
DIY SuppliesElectrical
ApplicationJunior high school physics and electricity experiment / middle school students' electromagnetism experiment / circuit experiment equipment (including new energy)
MaterialAs showing (various plastics, metals)
CertificationNone
OriginMainland China
Package Dimensions (L x W x H)41cm x 28cm x 8cm
Package Weight1.7 kg
Carrying case with dimensions 41cm x 28cm x 8cm

Image: Carrying case with approximate dimensions for storage and transport.

Safety Precautions

Always follow these safety guidelines when conducting experiments:

  • Adult supervision is recommended for younger students.
  • Do not connect components to household electrical outlets. Use only the provided battery pack or other low-voltage power sources suitable for the kit.
  • Ensure all connections are secure before activating a circuit.
  • Avoid touching exposed wires or terminals when a circuit is active.
  • Do not short-circuit batteries, as this can cause overheating or damage.
  • Handle magnets with care; strong magnets can pinch fingers or damage electronic devices.
  • Keep small components away from young children to prevent choking hazards.
  • If any component appears damaged, do not use it.

Basic Setup and Circuit Assembly

Before starting any experiment, familiarize yourself with the components. Most components feature terminals designed for easy connection with alligator clip wires.

Connecting Components:

  1. Identify the power source (e.g., battery pack).
  2. Use alligator clip wires to connect components in the desired configuration (series or parallel).
  3. Ensure all connections are firm to prevent intermittent circuit behavior.
  4. For circuits requiring a switch, ensure it is in the "off" position during assembly.
  5. When using meters (voltmeter, ammeter), connect them correctly:
    • Ammeter: Connect in series with the component to measure current.
    • Voltmeter: Connect in parallel across the component to measure voltage.
Simple series circuit diagram with battery, switch, and two bulbs

Image: Example of a simple series circuit setup, demonstrating connections between a battery pack, switch, and two light bulbs.

Circuit diagram with voltmeter, ammeter, battery, and rheostat

Image: Example of a circuit setup including a battery pack, sliding rheostat, and meters for measuring current and voltage.

Experiment Guide

This kit allows for a wide range of experiments covering basic electricity and magnetism. Below is a list of available experiments. For detailed procedures, refer to supplementary educational materials or textbooks.

Electricity Experiments:

  1. Simple circuit assembly
  2. Explore series / parallel circuits
  3. Explore conductors and insulators
  4. Understanding circuit diagrams
  5. Explore the current law of series / parallel circuits
  6. Voltmeter measures voltage
  7. Explore the law of series / parallel voltage
  8. Explore the series / parallel voltage law of battery pack
  9. Measure the current of the LED
  10. Explore the factors affecting resistance
  11. Learn how to use a sliding rheostat
  12. Ohm's law experiment
  13. Measure current with voltmeter and ammeter
  14. Measure the power of a small bulb
  15. Probe into galvanic cell experiment
  16. Determine whether an object is powered on
  17. Understanding the unidirectional conductivity of diodes

Magnetism and Electromagnetism Experiments:

  1. Understanding simple magnetic field phenomena
  2. Magnetic field and magnetic induction lines
  3. Oersted experiment
  4. Solenoid (electromagnet)
  5. Simple doorbell experiment
  6. Understand the principle and application method of an electric bell
  7. Force of magnetic field on energized conductor
  8. Understanding DC motor
  9. Know hand generator
  10. Solar power generation experiment
  11. Exploring resistance law tester
  12. Exploring energy conversion experiment
  13. Exploring the principle of magnetoelectricity
  14. Friction electrification experiment
  15. Know and make a simple compass
  16. Explore the principle of magnetic levitation
  17. Explore the principle of wind powered trolley
Various components for electricity and magnetism experiments

Image: A selection of components used in various experiments, including meters, switches, and power sources.

Smaller components for magnetism and circuit experiments

Image: Close-up of smaller components such as magnets, bulbs, wires, and tools, essential for detailed experiments.

Care and Maintenance

  • Cleaning: Wipe components with a soft, dry cloth after use. Avoid using water or chemical cleaners, especially on electrical parts.
  • Storage: Store all components in the provided carrying case or a similar organized container to prevent loss or damage. Keep the kit in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: Remove batteries from the battery pack if the kit will not be used for an extended period to prevent leakage.
  • Wire Care: Inspect alligator clip wires for fraying or damage before each use. Replace damaged wires immediately.

Troubleshooting

If an experiment is not working as expected, consider the following common issues:

  • Circuit Not Working (e.g., bulb not lighting):
    • Check all wire connections to ensure they are secure.
    • Verify that the power source (battery pack) has fresh batteries and is connected correctly.
    • Ensure the switch is in the "on" position.
    • Check if the bulb is burnt out; try a different bulb.
    • Confirm the circuit is complete and there are no breaks in the path.
  • Meter Readings are Zero or Incorrect:
    • Ammeter: Ensure it is connected in series with the component.
    • Voltmeter: Ensure it is connected in parallel across the component.
    • Check the polarity of the connections.
    • Verify the circuit is active and current/voltage is expected.
  • Motor Not Spinning:
    • Check power supply and connections.
    • Ensure the motor is not obstructed.
    • Verify correct polarity for DC motors.

User Tips

  • Start Simple: Begin with basic circuit assembly to understand how components connect and interact before moving to more complex experiments.
  • Draw Diagrams: Sketching circuit diagrams before building them can help visualize the connections and prevent errors.
  • Experiment Log: Keep a notebook to record your experiment setups, observations, and results. This aids in understanding and troubleshooting.
  • Explore Variations: Once you understand a basic experiment, try varying parameters (e.g., number of batteries, different resistors) to observe changes.
  • Component Identification: Familiarize yourself with each component's function and how to properly connect it.

Support and Contact Information

For any questions, concerns, or assistance with your EUDAX School Physics Labs Experiment Kit, please contact the seller directly through the platform where you made your purchase.

Business Hours (Beijing Time):
Monday - Friday: 8:30 A.M. - 6:00 P.M.
Saturday: 8:30 A.M. - 12:00 P.M.

We are committed to providing satisfying results and establishing a long-term relationship with our customers.

© 2023 EUDAX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.